• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.185-194
• /
• 2012

Deepwater oil is becoming more attractive because most onshore and shallow water oil is developing or developed. With the on-going trend to deepwater oil developments, flow assurance problems which prevent oil flow from reservoir to processing facilities are becoming an issue because deposited material can be occurred in case oil is exposed to very different environment from reservoir. Wax deposition which is one of flow assurance problems can be a major technical and economic issue because it is very sensitive to temperature. In order to predict and mitigate wax problems, the precise measurement of wax appearance temperature (WAT) which is the starting temperature of wax precipitation is very important. Various methods have been suggested for WAT measurement of opaque oil because there is no standard method for opaque oil. In this study, the WAT of opaque oil samples was measured using viscosity measurement method, differential scanning calorimetry, filter plugging method, and pressurized filter plugging method. Wax deposition test and high temperature gas chromatography analysis were applied to verify measured WAT. As a result of study, the WAT of opaque oils was successfully measured and verified. If WAT measurement methods of opaque oil related to oil characteristics is systematized using the results of this study, it can be a valuable tool for WAT measurement of opaque oil and flow assurance related to wax deposition.

• Journal of Energy Engineering
• /
• v.24 no.2
• /
• pp.1-8
• /
• 2015

Wax deposition hinders oil flow assurance. Huge amount of money and time were required for mitigation of wax deposition in the oil field. For prediction and mitigation of wax deposition problem, Wax Appearance Temperature(WAT), which is the temperature at which the first wax crystals start to form, needs to be measured in advance. There is a standard method which is optical way to measure the WAT of transparent oil. However, standard method cannot be applied to opaque oil which is common produced oil in the field. In this study, WAT of three transparent oil samples were measured using heat flux variation analysis, viscosity variation analysis and density variation analysis, and compared with WAT measured by standard method. As a result, WAT measured by density variation analysis is the more reliable than heat flux variation analysis and viscosity variation analysis. WAT of two opaque oils were measured using density variation analysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.10
• /
• pp.93-99
• /
• 2010

A nano-stereolithography is the direct patterning process with a nanoscale resolution using twophoton absorption induced by a femtosecond laser. However, in the majority of the works, the fabrication of 3D microstructures have been done only onto transparent glass due to the use of an oil immersion objective lens for achieving a high resolution. In this work, the coaxial illumination and the auto-focusing system are proposed for the direct patterning of nano-precision patterns on an opaque substrate such as a silicon wafer and a metal substrate. Through this work, 3D polymer structures and metallic patterns are fabricated on a silicon wafer using the developed process.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.10a
• /
• pp.127-127
• /
• 2011

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.3
• /
• pp.495-503
• /
• 2017

Wax components can be precipitated when surrounding temperature decreases below wax precipitation temperature (WAT). WAT as well as pour point are important characteristics to evaluate the behavior of waxy oils. In this study, qualitative and quantitative evaluations of waxes in waxy model oils were presented after determining WAT and pour point. In case of anhydrous waxy model oils, ASTM D2500 may be most useful to determine WAT because of the transparent nature of model oils. With same apparatus, ASTM D97 is also applicable to determine the pour point of waxy oils in a serial determination. In case of emulsified model oils, however, it is difficult to measure WAT because of its opaque nature. This study employed FTIR spectroscopy to determine wax precipitation temperature and discussed the effect of emulsion state regarding the values of WAT. Further study would be needed to conclude the effect of water contents to WAT values in case of emulsified waxy oil.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.4
• /
• pp.249-255
• /
• 2009

The main object of this study was to prepare of w/o emulsion including glyceryl monooleate(GMO) and to evaluate its stability by using the recently developed $Turbiscan^{(R)}LAB$. GMO is the polar oily surfactant with the low HLB value, and it forms the gel phase of cubic structures after dissolves in aqueous media. Phosphate buffer solution (PBS) of pH 7.4 was prepared as the water phase and Marcol 52(mineral oil) was used as the oil phase in this study. GMO was used as the surfactant of W/O emulsion. W/O emulsion using GMO alone as a surfactant was very unstable. But the emulsion using both GMO and poloxamer 407 was more stable. The stability of W/O emulsions was evaluated after centrifuging the emulsions. But it was difficult with naked eye because an opaque and concentrated system like W/O emulsion was very turbid. So $Turbiscan^{(R)}LAB$ was used to detect the destabilization phenomena in non-diluted emulsion. As a result, the W/O emulsion using the proper amounts of GMO and poloxamer 407 was more stable among them using GMO of various amounts. But it seems that the other element for the stability of W/O emulsion including GMO was required. Furthermore, the $Turbiscan^{(R)}LAB$ was a very efficient analyzer for evaluating the physical stability of emulsion.

• Journal of the Korean earth science society
• /
• v.43 no.5
• /
• pp.639-646
• /
• 2022

Occurrence of black opaque hydrocarbon (pyrobitumen) in some Cretaceous Jinju sandstones of the Sindong Group, Gyeongsang Basin in Korea is first reported in this study. The pyrobitumen is developed on chlorite pore-lining cement, or impregnated into the outer zone of chlorite cement. Therefore, it seems to have been formed after the precipitation of chlorite cement, indicating the former presence of crude oil. The liquid hydrocarbons migrated into sandstones during moderate burial and these sandstones seem to have acted as a liquid hydrocarbon reservoir. The presence of pyrobitumen in the Jinju Formation indicates that this formation underwent deep burial after liquid hydrocarbon migration. As reservoir temperatures increased further, hydrocarbons were cracked and a solid pyrobitumen residue remained in the reservoir.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.4
• /
• pp.323-330
• /
• 1994

Benzyladenine(BA) and Diphenylurea(DPU) at 10ppm level were foliar-applied one to three times at an interval of 10 days from heading stage of rice variety, Dongjinbyeo. One time treatment of both cytokinins did not delayed leaf senescence substantially, but consecutive treatments of two to three times markedly retarded leaf senescence. Leaf senescence retarding effects were greater in BA than DPU. Ripened grain ratio, grain weight and grain yield were not improved by the treatments. BA treatments increased the percentage of green and white belly kernels with no effects on opaque and white core kernels. BA and DPU treatments did not altered amylose content, but BA treatments significantly decreased protein content of polished rice. Consecutive treatments of BA and DPU twice or three times at an interval of 10 days from heading increased oil content by 30 to 78% as compared to non-treated control, but one time treatment at any stage did not enhance it of polished rice. Fatty acid composition was slightly altered in favor of unsaturated fatty acid by BA and DPU treatments.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.449-470
• /
• 2018

A review of research trends on wood surface protection for exterior use obtained the following conclusions: It has been reported that inorganic compounds such as chrome and copper used as wood preservatives can protect wood from weathering. It has been shown that precoating with hydrophobic substances such as wax and oil, UV absorbers, and HALS (Hindered Amine Light Stabilizers) enhances weathering resistance on the surface of ACQ-treated wood. Opaque coatings of paint/stains and semitransparent stains on the surface of preservative treated wood can increase the synergistic effects on prevention of weathering deterioration. Also the need for repainting periodically for the protection of the preservative treated wood surface has also been suggested. ZnO or $TiO_2$ of fine particles, metal ions such as Co, Cr, Fe, Mn, Ni and Ti, and UV absorbers such as tris-resorcinol triazine derivatives, triazine and benzotriazole were introduced as additives for preventing UV in the transparent coating on wood. Several reports showed that chemical modification such as methylation, acetylation, or alkylations have made some increases the effects of preventing weathering with the increasing weight gain of chemical formulas. In heat-treated wood, there were various contradictory reports on the resistance of weathering, and there were some other reports emphasizing the necessity of painting with UV resistance, which leads to the necessity of more advanced studies.

• Korean Journal of Ichthyology
• /
• v.26 no.4
• /
• pp.267-273
• /
• 2014

This research has carried out to make a data base of taxonomic research. That Data base explains about spawning behavior, egg development, and morphologic development of variable sabretooth blenny. Fertilized egg was demersal egg which is white and opaque. The number of oil glouble were 10~11, and the size of egg was 0.90~1.43 mm (average rate $1.11{\pm}0.23mm$, n=10). Breeding water temperature was $25.5{\sim}28.5^{\circ}C$ (average rate $27.0^{\circ}C$), and salinity was 32.5~33.5‰ (average rate 33.0‰). After 24 hours from 2 cells, the process of egg development was reached to Blastula stage. Moreover, after 330 hours from 2 cells, nostrils and eyes were formed. Egg membrane was pierced by the head, and the hatch began. After the hatch, postlarvae had 2.59~3.02 mm (average rate $2.81{\pm}0.25mm$, n=5) of whole length, and the mouth and anus were opened. Yolk sac and oil glouble were absorbed. After three days from hatch, prelarvae were 3.02~3.07mm(average rate $3.04{\pm}0.04mm$) of whole length, and caudal fin was grown with round shape. After 13 days from hatch, prelarvae had 3.04~3.20 mm (average rate $3.12{\pm}0.11mm$) of whole length, and they could eat food with upper jaw and bottom jaw.