• Transactions on Electrical and Electronic Materials
• /
• 제9권4호
• /
• pp.163-168
• /
• 2008

Photonic crystal structures have been received considerable attention due to their high optical sensitivity. One of the techniques to construct their structure is the dip-pen lithography (DPN) process, which requires a nano-scale resolution and high reliability. In this paper, we propose a two dimensional photonic crystal array to improve the sensitivity of optical biosensor and DPN process to realize it. As a result of DPN patterning test, we have observed that the diffusion coefficient of the mercaptohexadecanoic acid (MHA) molecule ink in octanol is much larger than that in acetonitrile. In addition, we have designed and fabricated optical waveguides based on the mach-zehnder interferometer (MZI) for application to biosensors. The waveguides were optimized at a wavelength of 1550 nm and fabricated according to the design rule of 0.45 delta%, which is the difference of refractive index between the core and clad. The MZI optical waveguides were measured of the optical characteristics for the application of biosensor.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.113-115
• /
• 2003

Droplet impinging into a cavity at micro-scale is one of important fluidic issues for microfabrications, e.g. bio-chip applications and inkjet deposition processes in the PLED panel manufacturing. The droplets generally dispensing from an inkjet head, which contains an array of nozzles, have a volume in several picoliters, while each nozzle jets the droplets into cavities with micron-meter size located on substrates. Due to measurement difficulties at micro-scale, the numerical simulation could serve as an efficient and preliminary way to evaluate the micro-sized droplet impinging behavior into a cavity. The micro-fluidic flow is computed by solving the three-dimensional Navier-Stokes equations through a finite volume discretization. The droplet front is predicted by a volume-of-fluid approach, in which the surface tension is modeled as a function of the fluid concentration. This paper discusses the influence of fluid properties, such as surface tension and fluid viscosity, on micro-fluidic characteristics at different jetting speeds in the deposition process via the proposed numerical approach.

• 대한기계학회논문집B
• /
• 제30권4호
• /
• pp.287-297
• /
• 2006

The Holographic Particle Velocimetry system can be a promising optical tool for the measurements of three dimensional particle velocities. One of inherent limitations of particle holography is the very long depth of field of particle images, which causes considerable difficulty in the determination of particle positions in the optical axis. In this study, we introduced three auto-focusing parameters corresponding to the size of particles, namely, Correlation Coefficient, Sharpness Index, and Depth Intensity to determine the focal plane of a particle along the optical axis. To investigate the suitability of the above parameters, the plane image of dot array screens containing different size of dots was recorded by diffused illumination holography and the positions of each dot in the optical axis were evaluated. In addition, the effect of particle position from the holographic film was examined by changing the distance of the screen from the holographic film. All measurement results verified that the evaluated positions using suggested auto-focusing parameters remain within acceptable range of errors. These research results may provide fundamental information for the development of the holographic velocimetry system based on the automatic image processing.

• 한국광학회지
• /
• 제7권1호
• /
• pp.9-16
• /
• 1996

렌티귤러 렌즈를 이용한 2안용 입체영상 시스템에서 렌티큘러 렌즈와 관찰자와의 거리 및 렌티큘러 렌즈의 주기를 변화시키면서 입체영상 시스템의 광학적 특성을 컴퓨터를 이용하여 모의실험을 하였다. 모의실험결과에 의하면 렌즈로부터 관찰자까지의 거리가 가까워짐에 따라서 렌즈의 주기가 주어진 LCD화소의 주기보다 작아져야 한다는 사실을 보여준다. 또한 어떤 일정한 조건하에서 오른쪽 눈에서의 화상과 왼쪽 눈에서의 화상이 공간적으로 비교적 균일하게 분포한다는 것을 알 수 있다. 그러나 이 경우 시스템의 잡음도 공간적으로 균일하게 분포되고 또한 렌즈로부터 관찰자까지의 거리가 멀어질수록 그 잡음의 크기가 커진다는 것을 알 수 있다.

• Smart Structures and Systems
• /
• 제3권4호
• /
• pp.439-454
• /
• 2007

In this paper a damage imaging technique using pre-stack migration is developed using Lamb (guided) wave propagation in composite structures for imaging multi damages by both numerical simulations and experimental studies. In particular, the paper focuses on the experimental study using a finite number of sensors for future practical applications. A composite laminate with a surface-mounted linear piezoelectric ceramic (PZT) disk array is illustrated as an example. Two types of damages, one straight-crack damage and two simulated circular-shaped delamination damage, have been studied. First, Mindlin plate theory is used to model Lamb waves propagating in laminates. The group velocities of flexural waves in the composite laminate are also derived from dispersion relations and validated by experiments. Then the pre-stack migration technique is performed by using a two-dimensional explicit finite difference algorithm to back-propagate the scattered energy to the damages and damages are imaged together with the excitation-time imaging conditions. Stacking these images together deduces the resulting image of damages. Both simulations and experimental results show that the pre-stack migration method is a promising method for damage identification in composite structures.

• Journal of Power Electronics
• /
• 제11권4호
• /
• pp.542-550
• /
• 2011

This paper describes the design and hardware implementation of a Single Input Fuzzy Logic Controller (SIFLC) to regulate the output voltage of a boost power converter. The proposed controller is derived from the signed distance method, which reduces a multi-input conventional Fuzzy Logic Controller (CFLC) to a single input FLC. This allows the rule table to be approximated to a one-dimensional piecewise linear control surface. A MATLAB simulation demonstrated that the performance of a boost converter is identical when subjected to the SIFLC or a CFLC. However, the SIFLC requires nearly an order of magnitude less time to execute its algorithm. Therefore the former can replace the latter with no significant degradation in performance. To validate the feasibility of the SIFLC, a 50W boost converter prototype is built. The SIFLC algorithm is implemented using an Altera FPGA. It was found that the SIFLC with asymmetrical membership functions exhibits an excellent response to load and input reference changes.

• 한국재료학회지
• /
• 제32권6호
• /
• pp.307-312
• /
• 2022

Metal halide perovskite (MHP) nanocrystals (NCs) have emerged as promising materials for various optoelectronic applications including photovoltaics, light-emitting devices, and photodetectors because of their high absorption coefficient, high diffusion length, and photoluminescence quantum yield. However, understanding the morphological evolution of the MHP NCs as well as their controlled assembly into optoelectronic devices is still challenging and will require further investigation of the colloidal chemistry. In this study, we found that the amount of n-octylamine (the capping agent) plays a crucial role in inducing further growth of the MHP NCs into one-dimensional nanowires during the aging process. In addition, we demonstrate that the dielectrophoresis process can permit self-alignment of the MHP nanowires with uniform distribution and orientation on interdigitated electrodes. A strong light-matter interaction in the MHP NWs array was observed under UV illumination, indicating the photo-induced activation of their luminescence and electrical current in the self-aligned MHP nanowire arrays.

• 한국광학회지
• /
• 제14권5호
• /
• pp.504-508
• /
• 2003

최근 전자산업계에 새롭게 널리 생산되는 마이크로 전자부품들은 왜곡이 최소화된 정밀한 외관 형상을 갖도록 제조되고 관리되지만, 측정 대상의 표면이 가시광 영역에서 광산란되는 특징을 가짐으로 인해, 기존의 피죠나 마이켈슨 형태의 비교간섭법으로는 고정밀의 삼차원 형상측정이 용이하지 아니하였다. 본 논문에서는 광섬유를 이용한 새로운 개념의 점회절 간섭계를 제안하고, 이를 광산란 거친표면의 대표적인 제품인 칩패키지와 실리콘 웨이퍼의 삼차원 형상 측정에 적용하였다. 측정결과 66 mm 측정영역에서 측정 형상오차 PV(peak-to-valley value) 5.6 $\mu\textrm{m}$, 분산값($\sigma$) 1.5 $\mu\textrm{m}$를 획득함으로써 기존의 비교 간섭 측정법에 비해 더욱 향상된 측정 정밀도를 획득하였다.

• 한국방재학회 논문집
• /
• 제10권6호
• /
• pp.45-52
• /
• 2010

사면붕괴로 인한 피해를 최소화하기 위한 방법 중 하나는 사면의 변위발생을 계측하고 붕괴를 예측하여 사전에 방재대책을 수립하는 것이다. 이를 위해 다양한 계측장비들을 활용하여 붕괴를 예측할 수 있는 기술들이 개발되고 있다. 특히 최근에는 사면의 변위발생을 계측하기 위해 첨단 촬영 장비인 지상라이다를 활용하려는 노력이 시도되고 있다. 지상 LiDAR는 수백 미터의 거리에서도 수 mm의 정확도로 대상물의 3차원 정보를 획득 할 수 있기 때문에 문화재 복원, 3차원 모델링, 지형도 작성 등 다양한 분야에서 활용되고 있으며 최근에는 구조물의 변위계측에도 활용되고 있다. 본 연구에서는 이러한 지상라이다를 이용하여 붕괴위험이 높은 위험관리사면을 대상으로 변위 모니터링 수행하였다. 그 결과 지상라이다의 현장적용 가능성을 확인할 수 있었으며 모니터링 방법에 대해 제시할 수 있었다.

• ALGAE
• /
• 제35권2호
• /
• pp.177-187
• /
• 2020

Cyanobacteria have been widely reported to produce a variety of UV-absorbing mycosporine-like amino acids (MAAs). Herein, we reported production of the unusual MAA, mycosporine-glycine-alanine (MGA) in the cyanobacterium Sphaerospermopsis torques-reginae ITEP-024 using a newly developed UHPLC-DAD-MS/HRMS (ultra-high performance liquid chromatography-diode array detection-high resolution tandem mass spectrometry) method. MGA had previously been first identified in a red-algae, but S. torques-reginae strain ITEP-024 is the first cyanobacteria to be reported as an MGA producer. Herein, the chemical structure of MGA is fully elucidated from one-dimensional / two-dimensional nuclear magnetic resonance and HRMS data analyses. MAAs are unusually produced constitutively in S. torques-reginae ITEP-024, and this production was further enhanced following UV-irradiance. It has been proposed that MAA biosynthesis proceeds in cyanobacteria from the pentose phosphate pathway intermediate sedoheptulose 7-phosphate. Annotation of a gene cluster encoded in the genome sequence of S. torques-reginae ITEP-024 supports these gene products could catalyse the biosynthesis of MAAs. However, addition of glyphosate to cultures of S. torques-reginae ITEP-024 abolished constitutive and ultra-violet radiation induced production of MGA, shinorine and porphyra-334. This finding supports involvement of the shikimic acid pathway in the biosynthesis of MAAs by this species.