• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.481-489
• /
• 2017

The study area,Cheonan Stream, is an urban river that flows through urban areas in close proximity to densely populated areas and multi-use facilities. The natural river improvement project from 2006 to 2015 improved the quality of life of local residents with the improvement of river function, the restoration of the natural ecosystem and the securement of hydrophilic space. A bike way in the constructed waterside space was built focusing on trails. This study suggests improvements appropriate for insufficient bike way function-related regulations. The problems of ramps, river crossing facilities, stairway facilities, safety facilities, signs, road markings, and parking facilities, etc.have arisen in the utilization situation and citizen consciousness survey. As an improvement, it was suggested that 12% or fewer ramps should be improved, a submerged bridge should be installed at 7 places separated by stepping bridges, and signs and road markings according to bike way-related regulations should be installed and bike parking facilities at Cheonan station and Cheonan bus terminal should be expanded. The bike way in the waterfront of ChoenanCheon(river) will increase the accessibility and utilization rate of short-distance transportation with the institutional expansion of bike use facilities and work organizations and the improvement of facilities in accordance with urban rivers and bike-related regulations. Therefore, it is expected that the development of the living space will be beneficial for the citizens due to the elimination of traffic in the city and the activation of bike traffic.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.79-89
• /
• 2017

Current intersection with collectors allow entry and exit in the relevant sections just as defined by the pertinent design criteria without considering driving behavior of the vehicles coming in and out of the intersection. This study analyzed the roads in the weaving sections to review driving behavior. As a result, vehicles entering a main line are found to try to change a driving lane at a section 50~55m away from a nose part, while those entering a ramp from a main line try to change it at 35~40m from a nose part. Accordingly vehicles exiting to a connecting road from a main line were found to take prior action to change a lane earlier than those entering a main line. Conflict took place intensively at 35~40m section from the nose part entering a main line. Consequently, such conflict at an weaving section may be controlled by adjusting the length of driving lane making use of a double line (solid and dotted line) that can control changing a lane. Outcome of this study may be used as a basic data for operating and maintaining an weaving section of a intersection of a road and improving traffic safety.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.1 s.114
• /
• pp.92-106
• /
• 2006

The process of designing Cheonggyecheon Entrance Plaza began with researching four keywords: plaza, restoration. modernity and icon. The outcome of the research was reinterpreted into and informed the design. An urban plaza must not only be a stage for civic life but should also be a portrait of the city to which it belongs. Many Korean plazas, however, are treated as if they are parks. Yeouido Park, which was originally a vast urban void, and Seoul Plaza, recently paved with grass, are good example. The strong 'green myth' can hinder socio-political activities. Cheonggyecheon cannot be said to have been 'restored', since it is still disconnected from its origin and upper streams, and the water is circulated by electricity. So it is better understood as an artificial urban waterfront, rather than an ecologically restored stream. This fact might diminish its ecological value, but not its recreational one. The entrance plaza therefore should reflect that the new stream brings back an 'experience', not only water itself. At the same time, the catch phrase of this restoration project was 'post-modern'. The demolished Cheonggye Expressway represents the 'economy drive' of the 1970s, so the newly opened Cheonggyecheon serves as a perfect counterpart to it. But modernity in Korea is the spirit that made many of the good things, not only its shortcomings, we have now. And from the philosophy of this restoration project, we can see that it is still an ongoing attitude in a way. Remnant of Cheonggye Expressway can evoke our nostalgia for the era. There are plenty of symbols in Seoul, both as architecture and objects. But none of them provide citizens with experience, other than the experience of looking at them. Cheonggyecheon Entrance Plaza is a good place to serve as an icon for a dynamic Seoul. From the research, the designer concluded that this plaza should commemorate the incomparable horizontal experience of Cheonggyecheon and the old expressway, amid the vertical metropolis. The Pedestrian Sculpture, which people can stroll on and look out over Cheonggyecheon, is to be made of steel cladding with a core structure and represents the dynamism of the stream, Seoul and contemporary Korea. The choice of material and the steel structure are also ways of creating the icon. The Water Plaza, the space underneath the ramp, will accommodate people and their urban activities, providing an opportunity to play with water. The Waterblades will be a device for the dramatic beginning of the stream, simultaneously camouflaging ugly openings in the outlets. The Wall of Archaeology is to be made with pre-fab resin blocks, translucent enough so that people can see through any archaeological findings of the site. The strong water-resistant character of resin makes the wall steady throughout the flood season as well. Cheonggyecheon restoration project is an effort to combine contemporary urban demand with the once-existing physicality by evoking our nostalgia for it. The project itself shows many socio-political issues of present-day Korea. The entrance plaza design thus is focused on suggesting an icon for the metropolis, simultaneously celebrating the stream itself. Within this space, people will be exposed to a unique experience that any 'green myth' cannot offer.

• Journal of Korean Society of Transportation
• /
• v.19 no.6
• /
• pp.195-205
• /
• 2001

The objective of the paper is to analyze the traffic characteristics for freeway merging area. Freeway merging area is different from basic section due to ramp vehicles. Therefore, to understand the traffic characteristics of (leeway merging area, this study focused on two factors including critical time headway required in merging maneuver and maximum possible merging volume. In this paper, new model that adopts critical time headway instead of critical time gap in calculating the maximum possible merging volume based on probability function was developed In previous studies, for calculating the maximum possible merging volume, it was considered that merging vehicles could merge freely if a given time gap was greater than the critical time gap. Also, the critical time gap was used as the same value in all traffic flow conditions. But, a time gap required in merging maneuver could be changed, even to the same driver, because difference of relative speed varies in different traffic flow conditions. So, in some cases, the critical time gap could be insufficient value in merging maneuver. Therefore, in this study. a calculating procedure for critical time headway in all traffic flow conditions was presented. Also, the maximum possible merging volume and capacity for freeway merging area were calculated by using the previously found critical time headway.

• Journal of Digital Convergence
• /
• v.20 no.3
• /
• pp.41-52
• /
• 2022

Although domestic public libraries achieved quantitative growth based on the 1st and 2nd comprehensive library development plans, there were some qualitative shortcomings, and various studies have been conducted to improve them. Most of the preceding studies have limitations in that they are limited to social and economic factors and statistical analysis. Therefore, in this study, by applying the spatiotemporal concept to quantitatively calculate the decrease in public library loan demand due to rainfall and heatwave, by clustering areas with high demand for book loan due to weather changes and areas where it is not, factors inside and outside public libraries and After the combination, changes in public library loan demand according to weather changes were analyzed. As a result of the analysis, there was a difference in the decrease due to the weather for each public library, and it was found that there were some differences depending on the characteristics and spatial location of the public library. Also, when the temperature was over 35℃, the decrease in book loan demand increased significantly. As internal factors, the number of seats, the number of books, and area were derived. As external factors, the public library access ramp, cafe, reading room, floating population in their teens, and floating population of women in their 30s/40s were analyzed as important variables. The results of this analysis are judged to contribute to the establishment of policies to promote the use of public libraries in consideration of the weather in a specific season, and also suggested limitations of the study.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6D
• /
• pp.569-575
• /
• 2010

The occupancy based O/D is essential for measuring efficiency of various transportation policies like HOV/HOT lane, ramp metering, and public parking station. There has been many studies on occupancy survey methodology and O/D estimation using TCS (Toll Collection System) data separately. The occupancy O/D estimation methodology using TCS data has not been attempted thus far. An overall process from data collection stage to the occupancy O/D estimation stage has been suggested. Field survey was performed at the northbound Seoul toll station of Gyeongbu Expressway by each 2 hours of AM peak, PM non-peak, PM peak, midnight periods on a day. The process of matching the TCS data and field survey data classified by tollbooth ID, car type/mode, and arrival time was also performed. One typical output of the results showed that the ratio of single occupancy vehicles bounding for Seoul during the AM peak amounted to 60%. With the key output of this study and the specific O/D estimation methodology suggested, the whole centroid-to-centroid occupancy O/D of the country could be available, and then various applications in which the occupancy information is required could be possible.

• Journal of Sensor Science and Technology
• /
• v.6 no.1
• /
• pp.35-42
• /
• 1997

The optical biosensor using the electrically controlled release of reactive reagent is developed for the detection of peroxide. Rapid degradation of polymer complex of PEOx and PMAA occurs as the applied current increases and thus released amount of HPA increases. The degradation velocity of polymer and the amount of HPA released are linearly proportional to the applied current. Peroxide is reacted with the released reagent by peroxidase and then the product, a fluorescent dimer DBDA, is formed. The monochromic light from light source (150W Xe arc ramp) excites the DBDA and the excited light is transmitted through an optical fiber to be detected by a photodiode array. The change of fluorescence intensity is related to the change of peroxide concentration. The peroxidase is entrapped in Ca-alginate get on the inner surface. The biosensor has the linear signal range of 0.025mM-10.mM peroxide. By applying the step function of peroxide, reproducibility of biosensor has been investigated. The mathematical model is constructed by the combination of enzyme kinetics with reactor flow model. Good agreement is obtained between the experimental result and model prediction in the sensor signal.

• Clean Technology
• /
• v.21 no.2
• /
• pp.117-123
• /
• 2015

This inquiry was conducted to develop DeNOx catalyst for LNT. In order to develop appropriate catalysts, four catalysts, which do not use PGM (Platinum Group Metal), were carefully selected : Al/Co/Mn, Al/Co/Ni/Mn, Al/Co/Mn/Ca, Al/Co/Ni mixed metal oxides during preliminary experiments. Also, XRD, EDS, SEM, BET and TPD tests were carried as well to evaluate both physicochemical properties of such four catalysts. As a result of the experiment, four catalysts were composed of spinel-shaped crystals and had more than enough pore volume and size to have oxidation-reduction reaction of NOx gases. Additionally, through TPD test, all four types of catalysts were proved to possibly have an oxidation-reduction acid site and NO oxidation activities similar to commercial catalysts. Based on the results above, if we have further change in the composition components and active ingredients according to the catalysts that were chosen in this investigation, then we are more welcomed to expect to have an enhanced DeNox catalyst for LNT.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.65-72
• /
• 2011

When an expressway intersects another expressway, a unique connector needs to be designed between the two consecutive exit ramps. In such a case, it is important to design a connector such that there is enough distance for drivers to find their way safely. A current design manual in Korea prescribes the minimum length of the connector as 240 m. In this research, we have suggested a method for calculating the minimum length of a connector in order to check the feasibility of the currently prescribed length. For this purpose, we have attempted to determine the total perception-reaction time and lane-changing time required by a driver. For determining the driver's perception-reaction time, we have used the driver's decision time in addition to the conventional 2.5 s of perception-reaction time for stopping sight distances. We have considered both the design speed and the average travel speed for the calculation of the length. To evaluate the accuracy of the new method, we have chosen four sites on expressways for which relatively high accident rates were recorded. As a result, we could verify that the current limit (240 m) was sufficient for drivers to be able to change lanes in the given specific geometry. However, the prescribed limit should be revised in case the drivers' decision time is considered to be their perception-reaction time. All new approaches for calculating the ideal length of a connector have been carried out by taking into account the design speed as well as the average travel speed. Owing to the characteristics of the specific geometry for two consecutive exit ramps and the large difference between the design speed and the average travel speed in the objective areas, it is more realistic to use the proposed method by keeping the decision time equal to a driver's perception-reaction time, in order to determine the ideal distance that should be maintained between two consecutive exit ramps.

• Journal of the Korea Society for Simulation
• /
• v.17 no.2
• /
• pp.63-74
• /
• 2008

The design of best efficient production process is common requirements of the production strategy department and the process planning department to maximize the revenue and accomplish target production volumes in the production periods. And they use several general methods for that-line-balancing, removing of the bottle-neck process, facility ramp-up, increasing of the worker's utilization, etc. But, those methods have depended on analytic, static and arithmetic calculations, yet. So, irregular work-waiting time causing the delay time isn't include in extracting production capacity, especially in the line production process. The work-waiting time is changed irregularly along the variation of each machine and very important for calculate real product lead-time and forecasting target production volumes. At this thesis, i'm going to mention the importance of the delay time of conveyor system which can be extracted by discrete-event simulation. And suggest it as a new main variable that must be considered at designing new production system. Then experimented and tested that's effects in the H-company case, conveyor based line production process.