• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8C
• /
• pp.806-813
• /
• 2009

This paper presents a modem chip design for high-speed wireless communications. Among the high-speed communication technologies, we design the UWB (Ultra-Wideband) modem SoC (System-on-Chip) Chip based on a MB-OFDM scheme which uses wide frequency band and gives low frequency interference to other communication services. The baseband system of the modem SoC chip is designed according to the standard document published by WiMedia. The SoC chip consists of FFT/IFFT (Fast Fourier Transform/Inverse Fast Fourier Transform), transmitter, receiver, symbol synchronizer, frequency offset estimator, Viterbi decoder, and other receiving parts. The chip is designed using 90nm CMOS (Complementary Metal-Oxide-Semiconductor) procedure. The chip size is about 5mm x 5mm and was fab-out in July 20th, 2009.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.166-173
• /
• 2013

As the number of IPs and the communication volume among them have constantly increased, on-chip crossbar network is now the most widely-used on-chip communication backbone of contemporary SoCs. The on-chip crossbar network consists of multiple crossbars and the connections among the IPs and the crossbars. As the complexity of SoCs increases, it has also become more and more complex to determine the topology of the crossbar network. To tackle this problem, this paper proposes an on-chip crossbar network topology method for application-specific systems. The proposed method uses mixed integer linear programming to solve the topology synthesis problem, thus the global optimality is guaranteed. Unlike the previous MILP-based methods which represent the topology with adjacency matrixes of IPs and crossbar switches, the proposed method uses the communication edges among IPs as the basic element of the representation. The experimental results show that the proposed MILP formulation outperforms the previous one by improving the synthesis speed by 77.1 times on average, for 4 realistic benchmarks.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.40-48
• /
• 2015

An optical network-on-chip(ONoC) architecture is emerging as a new paradigm for solving on-chip communication bottleneck. Recent studies on ONoC have been focusing on supporting the parallel transmission and avoiding path collisions using wavelength division multiplexing(WDM). However, since the maximum number of wavelengths, which a single waveguide can accommodate is limited by crosstalk and insertion loss. Therefore previous WDM studies based on incrementing the number of different wavelengths according to the number of nodes would be infeasible due to the implementation complexity. To solve such problems, we combined time division multiplexing(TDM) and wavelength-routed ONoC, along with an optimized channel allocation algorithm, which can minimize the number of extra wavelength channels and latency caused by combining TDM scheme.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1203-1207
• /
• 2019

As the number of IP cores has been increasing in a System-on-Chip (SoC), multiple routers are included in on-chip-networks. Each router has its own arbitration policy and it is difficult to obtain a desired arbitration result by combining multiple routers. Allocating desired bandwidths to the ports across the routers is more difficult. In this paper, a guaranteed bandwidth allocation scheme using an IP-level QoS control is proposed to overcome the limitations of existing local arbitration policies. Each IP can control the priority of a packet depending on the data communication requirement within the allocated bandwidth. The experimental results show that the proposed mechanism guarantees for IPs to utilize the allocated bandwidth in multiple router on-chip-networks. The maximum error rate of bandwidth allocation of the proposed scheme is only 1.9%.

• Journal of Sensor Science and Technology
• /
• v.28 no.4
• /
• pp.221-224
• /
• 2019

Based on the results of studies on acetone excretion in diabetic patients, a one - chip sensors array was fabricated by combining acetone-selective sensor materials and volatile-organic-compound sensitive sensor materials. An electonic-nose was implemented using a sensor array and confirmed selectivity for five gases. In this system, the excretion of diabetic patients and controls was sampled with solid phase microextraction fiber and transferred to the sensor array. Although the control and diabetic patients were distinct, several samples failed. In the control group, the results of blood tests were normal, but patients were highly obese. In addition, the gas chromatography mass spectrometry results for the subjects revealed chemicals that are external factors.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.12
• /
• pp.1910-1917
• /
• 1989

This paper shows the performances of asynchronous binary direct-sequence spread-spectrum multiple access communication systems with Rayleigh fading and White Gaussian noise. The performance measures considered are worst-case bit error probability and average SNR depending on code sequences and chip waveforms. The code sequences used are m-sequence and Gold sequence with period 31.The chip waveforms employed are rectangular, sinusoidal and something other chip waveforms.

• ETRI Journal
• /
• v.32 no.6
• /
• pp.969-971
• /
• 2010

Based on a de-embedding technique, a new method is proposed which is capable of evaluating chip impedance behavior over absorbed power in flip-chip bonded UHF radio frequency identification transponder ICs. For the de-embedding, four compact co-planar test fixtures, an equivalent circuit for the fixtures, and a parameter extraction procedure for the circuit are developed. The fixtures are designed such that the chip can absorb as much power as possible from a power source without radiating appreciable power. Experimental results show that the proposed modeling method is accurate and produces reliable chip impedance values related with absorbed power.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.160-164
• /
• 2004

In DS/CDMA(direct sequence code division multiple access) system using the approximated analytic chip waveforms are applied. Proposed chip waveforms are classified into 2 types: uniform chip waveforms with uniform envelope and non-uniform chip waveforms with non-uniform envelope. It has confirmed that the similarity of the approximated analytical chip waveforms is compared using chip waveforms, envelope, phase, correlation, and bandwidth properties.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.7 s.361
• /
• pp.96-104
• /
• 2007

In this paper, the field solver based deembedding technique for the on-chip inductors to deembed the pad and surrounding ground effect was described, and the results from field solver based deembedding techniques and measurement based matrix calculation method were compared. In addition, LNA circuit is designed by using deembedded inductors and fabricated by using standard $0.25{\mu}m$ CMOS process, in the range over the 2.5GHz it shows the good agreements between measurement and simulation results when the proper deembedding was adapted. Supposed deembedding techniques can be used to get the pure on-chip devices's values and adapted to design accurate RFIC circuit design.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1195-1201
• /
• 2005

This paper deals with procedures and results for teal time implementation of G.729 speech coder and channel coder including convolution codec, viterbi decoder, and interleaver using a fixed point DSP chip for radio communication systems. We described the method for real-time implementation based on integer simulation results and explained the implemented results by quality performance and required complexity for real-time operation. The required complexity was 24MIPS and 9MIPS in computational load, and 12K words and 4K words in execution code length for speech and channel. The functional evaluation was performed into two steps. The one was bit exact comparison with a fixed point C code, the other was executed by actual speech samples and error test vectors. Unlik other results such as individual implementation, We implemented speech and channel coders on a DSP chip with 160MIPS computation capability and 64 K words memory on chip. This results outweigh the conventional methods in the point of system complexity and implementation cost for radio communication system.