• 전자공학회논문지C
• /
• 제36C권4호
• /
• pp.45-53
• /
• 1999

10Gbit/s 광수신기에 사용되는 전치증폭기, 리미팅증폭기, 그리고 판별회로 IC 등을 AlGaAs/GaAs HBT 기술을 이용하여 설계 제작하였다. 사용한 HBT는 차단주파수 55GHz, 최대 공진 주파수 45GHz 의 특성을 지닌다. 제작된 전치증폭기 와 PIN 광검출기를 이용해 광수신기 front-end를 구성하였는데, 측정된 이득은 46dBΩ, 3dB 대역폭은 12.3GHz 의 특성을 보였다. 리미팅증폭기는 소신호 이득 27dB, 3dB 대역폭 10.6GHz 특성을 보였으며, 입력 신호 전압 20mVp-p 이상에서 리미팅 동작이 이루어져 900mVp-p 신호를 출력하였다. 판별회로는 10Gbit/s에서 위상마진 300°, 입력 전압 수신감도 47mVp-p의 특성을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1512-1515
• /
• 1996

Dense $SiC-ZrB_2$ electro-conductive ceramic composites were obtained by hot pressing for high temperature structural application. The influences of the $ZrB_2$ additions an the mechanical and electrical properties of $SiC-ZrB_2$ composites were investigated. Samples were prepared by adding 15, 30, 45 vol.% $ZrB_2$ particles as a second phase to a SiC matrix. Sintering of monolithic SiC and $SiC-ZrB_2$ composites were achieved by hot pressing under a $10^{-4}$ torr vacuum atmosphere from 1000 to $2000^{\circ}C$ with a pressure of 30 MPa and held for 60 minutes at $2000^{\circ}C$. SiC and $SiC-ZrB_2$ samples obtained by hot pressing were fully dense with the relative densities over 99%. Flexural strength and fracture toughness of the samples were improved with the $ZrB_2$ contents. In the case of SiC sample containing 30vol.% $ZrB_2$, the flexural strength and fracture toughness showed 45% and 60% increase, respectively compared to those of monolithic SiC sample. The electrical resistivities of $SiC-ZrB_2$ composites were measured utilizing the four-point probe method and they decreased significantly with Increasing $ZrB_2$ contents. The resistivity of SiC-30vol.% $ZrB_2$ showed $6.50{\times}10^{-4}{\Omega}{\cdot}cm$.

• Transactions on Electrical and Electronic Materials
• /
• 제18권5호
• /
• pp.261-264
• /
• 2017

$Ni_{0.79}Co_{0.15-x}Cu_xMn_{2.06}O_4$ ($0{\leq}x{\leq}0.09$) thick films were fabricated using the conventional solid-state reaction method and screen-printing method. Structural and electrical properties of specimens based on the amount of Cu were observed in order to investigate their applicability in the infrared detector. All specimens showed a single spinel phase with a homogeneous cubic structure. As the amount of Cu increased, the average grain size increased and was found to be approximately $5.01{\mu}m$ for the $Ni_{0.79}Co_{0.06}Cu_{0.09}Mn_{2.06}O_4$ specimen. The thickness of all specimens was approximately $55{\sim}56{\mu}m$. As Cu content increased, the resistivity and TCR properties at room temperature decreased, and these values for the $Ni_{0.79}Co_{0.06}Cu_{0.09}Mn_{2.06}O_4$ specimen were $502{\Omega}-cm$ and $-3.32%/^{\circ}C$, respectively. The responsivity and noise properties decreased with an increase in Cu content, with the specimen with a Cu content of x=0.09 showing 0.0183 V/W and $5.21{\times}10^{-5}V$, respectively.

• 한국전기전자재료학회논문지
• /
• 제30권1호
• /
• pp.17-22
• /
• 2017

Effects of pH value and deposition time on the electrical properties of (NMC) Ni-Mn-Cu-O and (NMCC) Ni-Mn-Cu-Co-O thin films were investigated. The NMC and NMCC films were prepared by spin spray method. The crystal structure and thickness of the annealed films were changed by the pH value and deposition time, respectively. A single phase of cubic spinel structure was confirmed for the annealed films deposited from solutions with pH 7.6. The resistivity of the annealed films was affected by the crystal structure and microstructure. The TCR (temperature coefficient of resistance) was dependent on the $Mn^{3+}/Mn^{4+}$. Typically, the resistivity of $70.5{\Omega}{\cdot}cm$ and TCR of -3.56%/K at room temperature were obtained for NMCC films deposited from solutions with pH 7.6 for 5 min, and annealed at $450^{\circ}C$ for 3 h.

• 전기학회논문지
• /
• 제63권12호
• /
• pp.1671-1674
• /
• 2014

This paper presents a frequency-dependent cell impedance analysis chip for use in cancer and normal cell discrimination. The previous cell impedance analysis chips for flowing cells cannot allow enough time for cell-to-electrode contact to monitor frequency-dependent impedance response. Another type of the previous cell impedance analysis chips for the cells clamped by membranes need complex sample control for making stable cell-to-electrode contact. We present a new impedance analysis chip using the microchamber array, on which a PDMS cover is placed to make stable cell-to-electrode contact for the individual cell trapped in each microchamber; thus achieving frequency-dependent single-cell impedance analysis without complex sample control. Compared to the normal cells, the magnitude of NHBE cells is $60.07{\sim}97.41k{\Omega}$ higher than A549 cells in the frequency range of 95.6 kHz~2MHz and the phase of NHBE is $3.96^{\circ}{\sim}20.8^{\circ}$ higher than A549 cells in the frequency range of 4.37 kHz~2MHz, respectively. It is demonstrated experimentally that the impedance analysis chip performs frequency-dependent cell impedance analysis by making stable cell-to-electrode contact with simple sample control; thereby applicable to the normal cell and cancer cell discrimination.

• Journal of Microbiology and Biotechnology
• /
• 제9권5호
• /
• pp.687-690
• /
• 1999

Bacillus stearothermophilus No. 236 isolated from the soil is a strong xylan degrader producing all the xylanolytic enzymes. However, the strain was discovered to be highly intractable to its transformation. In the present study, we have developed a reliable method for transformation of B. stearothermophilus No. 236 by a systematic examination of several factors which might have an influence on the efficiency of electrotransformation. Notably, we found that the most critical factor influencing the transformation efficiency (TE) was the incubation temperature after pulsing, with its optimum incubation of $37^{\circ}C.\; At\; 50^{\circ}C$, the optimum growth temperature of the B. stearothermophilus strain, the transformants could not be obtained at a recognizable level. The combination of field strength of 7.5 kV/cm along with pulse duration of 10 msec (resistance of $400{\Omega}\; and\; capacitance\; of\; 25{\mu}F$) was shown to be the best electrical parameters at the incubation temperature of $37^{\circ}$. A higher TE was obtained when the cells were harvested at an early-exponential phase. Twenty percent of PEG-8000 in a suspension buffer and an addition of 0.1% glycine in the growth medium resulted in about 4-fold and 3-fold increases in TE, respectively. We also found that the plasmid DNA which had been cycled through the host B. stearothermophilus cells enhanced TE by one order of magnitude higher. Under the presently described conditions, $2.5{\times}10^{5} transformants per ${\mu}g$ DNA was attained.

• 열처리공학회지
• /
• 제26권6호
• /
• pp.288-292
• /
• 2013

We have considered the influence of electron irradiation energy of 300, 600 and 900 eV on the stuctural, electrical and optical properties of GZO/$TiO_2$ thin films prepared with RF magentron sputtering. The optical transmittance and electrical resistivity of the films were dependent on the electron's irradiation energy. The electron irradiated GZO/$TiO_2$ films at 900 eV are grown as a hexagonal wurtzite phase and the resistivity is decreased with electron irradiation energy. The GZO/$TiO_2$ films irradiated at 900 eV shows the lowest resistivity of $4.3{\times}10^{-3}{\Omega}cm$. The optical transmittance in a visible wave length region also increased with the electron irradiation energy. The film that electron irradiated at 900 eV shows 82% of optical transmittance and higher work function of 5.18 eV in this study.

• 열처리공학회지
• /
• 제25권3호
• /
• pp.134-137
• /
• 2012

We have considered the effect of electron irradiation energy of 300, 600 and 900 eV on structural, electrical and optical properties of $In_2O_3$ films prepared with RF magnetron sputtering. In this study, the thin film crystallization, optical transmittance and sheet resistance are dependent on the electron's irradiation energy. The electron irradiated $In_2O_3$ films at 900 eV are grown as a hexagonal wurtzite phase. The sheet resistance decreases with a increase in electron irradiation energy and $In_2O_3$ film irradiated at 900 eV shows the lowest sheet resistance of $110{\Omega}/{\Box}$. The optical transmittance of $In_2O_3$ films in a visible wave length region also depends on the electron irradiation energy. The film that at 900 eV shows the higher figure of merit than another films prepared in this study.

• 한국표면공학회지
• /
• 제41권2호
• /
• pp.69-75
• /
• 2008

Electrochemical behaviors of surface modified and MC3T3-E1 cell cultured Ti-30Ta alloys have been investigated using various electrochemical methods. The Ti alloys containing Ta were melted by using a vacuum furnace and then homogenized for 6 hrs at $1000^{\circ}C$. MC3T3-E1 cell culture was performed with MC3T3-E1 mouse osteoblasts for 2 days. The microstructures and corrosion resistance were measured using FE-SEM, XRD, EIS and potentiodynamic test in artificial saliva solution at $36.5{\pm}1^{\circ}C$. Ti-Ta alloy showed the martensite structure of ${\alpha}+{\beta}$ phase and micro-structure was changed from lamellar structure to needle-like structure as Ta content increased. Corrosion resistance increased as Ta content increased. Corrosion resistance of cell cultured Ti-Ta alloy increased predominantly in compared with non cell cultured Ti- Ta alloy due to inhibition of the dissolution of metal ion by covered cell. $R_p$ value of MC3T3-E1 cell cultured Ti-40 Ta alloy showed $1.60{\times}10^6{\Omega}cm^2$ which was higher than those of other Ti alloy. Polarization resistance of cell-cultured Ti-Ta alloy increased in compared with non-cell cultured Ti alloy.

• 한국항공우주학회지
• /
• 제41권12호
• /
• pp.987-993
• /
• 2013

한국형기동헬기(KUH)는 국내 최초로 개발된 헬기로서, 2010년 3월 초도 비행을 시작으로 2012년 6월 체계 개발을 성공적으로 종료하였다. 비행시험 단계에서 다양한 진동문제가 발생하였으며 이를 제어하기 위해 적절한 진동저감장치를 설계하고 적용하였다. 한국형 기동헬기의 주요 진동 성분인 $4{\Omega}$ 주파수 진동 저감을 위해 주로터 블레이드, 주기어박스 지지부, 조종실, 승객실 그리고 조종좌석에 진동저감장치를 적용하였다. 또한, 테일-쉐이크 진동 제어를 위해 돔페어링을 적용하였다. 본 논문에서는 한국형 기동헬기에 적용된 진동저감장치들의 해석 및 설계 기법과 비행시험 결과를 제시한다.