• Bulletin of the Society of Naval Architects of Korea
• /
• v.22 no.4
• /
• pp.17-27
• /
• 1985

In this paper, an approximate calculation method on the transverse strength of oil tankers by use of slop-deflection method os described which considers the effect of shear deflection and varing section in elements and the result of calculation in models and actual ships, is presented. The object of this paper is focused on the development of program which can be used widely regardless strut numbers in transverse frame rings. To examine the reliability of the above method, the results in this paper are compared with the results which are obtained by use of SAP4(Structure Analysis Program) based on finite element method. The application of the Slope-Deflection Method on the transverse strength of oil tankers has the advantage that this method takes less than the other methods in calculation.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.2
• /
• pp.86-94
• /
• 1999

This paper describes a development of Collision/grounding Strength Assessment System (COSAS) using simplified method. This method is formulated in closed-form equation by taking into account crushing caused by bulbous bow collision and cutting caused by forward speed grounding. To verify the accuracy of the developed system, some examples for test models of double side/bottom structure in collision/grounding situation are considered. This system might be useful for analysis of structural damage of oil tankers in collision/grounding.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.5 no.1
• /
• pp.9-18
• /
• 1999

To predict the oil spill dispersion phenomena in the ocean, the oil spill response model, which can be used for strategic purpose on the oil spill site, based on Lagrangian particle-tracking method was formulated and applied to the neighboring area with Pusan port where the oil spill incident occurred when the tanker ship No.1 Youil struck on a small rock near the Namhyungjeto on September 21, 1995. The real-time tidal currents to be required as input data of the oil spill model were obtained by the two-dimensional hydrodynamic model and the tide prediction model. Evaluation of tidal currents using observation data was successful. For wind data, other input data of oil spill model, observed data on the spot were used. To verify the oil spill model, the oil spill modelling results were compared with the field data obtained from the spill site. Compared the modelling results with the observation data, there exist some discrepancies but the general pattern of modelling results was similar to that of field observation. The modelling results on 7 days after spill occurred showed that the 40% of spilled oil is in floating, 36% in evaporated, 23% at shore, and 1% in out of boundary, respectively. According to the evaluation of weighting curves of effective components to the dispersion of oil, the winds make a 37% of contribution to the dispersion of oil, turbulent diffusion 39.5%, and tidal currents 23.5%, respectively. Provided the more accurate wind data are supported, more favorable results might be obtained.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.2
• /
• pp.144-152
• /
• 2018

This study aims to establish a mathematical formula to provide rapid and safety estimation of the damaged double hull tankers under ship-ship collision. Difference in heights between the striking and struck ships 'h' and penetration depth 'x' were considered as the main parameters. In ship-ship interaction, Large oil tankers are selected as target struck vessels, and they are struck by Very Large Crude-Oil Carrier (VLCC) class oil tanker. The residual strength of damaged ship at several locations and collision scenarios were carried out using Intelligent Supersize Finite Element Method (ISFEM) which considers the progressive collapse behavior of ship hulls strength. Based on these results, satisfactory was achieved and empirical formula was successfully established using the regression analysis method by deploying the height difference 'h' and penetration depth 'x' as the observed parameters.

• Journal of Navigation and Port Research
• /
• v.38 no.4
• /
• pp.379-384
• /
• 2014

In case of sunken tankers, remaining-oil recovery operation should be conducted due to possible oil spill accident. However, the deep sea operation make difficulties in checking the completion of remaining oil recovery process, therefore the work termination procedure is very important. In this paper, a reasonable work termination procedure through the comparison and analysis of two cases(Youil No.1 and Osung No.3, Kyung-Shin) which were performed in different method, using disparate equipment. By investigating previously applied methods and techniques, work speed, safety and expenses were compared. The proposed ending procedure of the remaining-oil recovery project is to recover the remaining oil from each cargo tanks and to clean up such tanks whilst an independent surveyor proceeds to a confirmation procedure whereby said surveyor checks out whether any remaining oil exists by putting a stick in each cleaned up tanks and opening up the hatch cover of the tanks or the top place of the tanks to confirm the cleanness of oil. Such procedure shall be done through discussion by the ordering party, contractor and the independent surveyor all together with a flexible application.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2009.09a
• /
• pp.24-34
• /
• 2009

The latest trend of development for submarine oil field is caused by the drained oil and gas for ground field, and FPSO is a keyword as the development for submarine oil field. FPSO (Floating Production Storage Offloading) is a kind of vessel type have a topside system for production of oil and gas and store them until the oil or gas can be offloaded onto a tanker or transported through a pipeline. Prior to the introduction of reinforcement under the pull-in winch on the STP extended top as the object of this paper, the technical background shall be introduced such as FPSO and the system and main equipments for STP as follows. The original structural concept for reinforcement of pull-in winch on the STP top and extended structure on moonpool was proposed by buyer's engineering team but it was much modified and improved in accordance with builder's fabrication and construction method.

• Structural Engineering and Mechanics
• /
• v.54 no.5
• /
• pp.999-1016
• /
• 2015

In this paper, we introduce a new method for assembly of shipbuilding blocks at sea and present its feasibility focusing on structural safety. The core concept of this method is to assemble ship building blocks by use of bolting, gluing and welding techniques at sea without dock facilities. Due to its independence of dock facilities, shipyard construction capability could be increased considerably by the proposed method. To show the structural safety of this method, a bulk carrier and an oil tanker were employed, and we investigated the structural behavior of those ships to which the new block assembly method was applied. The ship hull models attached with connective parts are analyzed in detail through finite element analyses, and the cargo capacity of the bulk carrier is briefly discussed as well. The results of these studies show the potential for applying this new block assembly method to practical shipbuilding.

• Journal of Fisheries and Marine Sciences Education
• /
• v.21 no.2
• /
• pp.291-305
• /
• 2009

As you known well, Ulsan port is very famous for handling chemical products which occupies about 80% of quantities of all Korean ports. Many ship's operators prefer to handle liquid cargo es at proper anchorages instead of the berth for saving port expenses. Ulsan M-10 anchorage was assigned for handling liquid cargoes, however this anchorage's space is restricted by the oil pipeline which lays under seabed about 400m off from the center of M-10 anchorage, for which we have to consider of the external force and counter force for keeping the safety of anchoring. Where, external force is induced by wind, tidal currents and wave while counter force is induced by holding power of anchor/chain. In this study, author evaluated a method to analyze theoretically the limit of external force condition up to which an anchoring ship can keep her position without dragging, and for which applied to many kinds of combined Ships as mother ship of 50,000 DWT Tanker and 4 sizes of Tanker as alongsided ship.

• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.213-221
• /
• 2007

Recently, environmental design are becoming a matter of grave concern in shipbuilding. Out of these concern, oil spilt which is induced by grounding accidents is very critical reason of the ocean pollution. Therefore, a series qf quarter of 105k tanker model grounding simulations were conducted to analyze it's characteristics for the accident. ship get using LS-DYNA3D. In this paper, to conduct whole simulations, a meshsize convergence test was carried out to determine appropriate meshsize for grounding test. After the series analysis. These results were analyzed as each case.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.267-269
• /
• 2009

This study investigated & analyzed the scheme for Ship Management for the Activation of world-wide Oil business. Shipping safety & marine pollution accidents occurred a huge property loss not only a shipping companies but also a oil companies, and marine accident may affect to a shipping company to go out of existence. On that score, oil companies have executed the evaluation by periods on each shipping companies and ships, and SIRE is inter-sharing by internet homepage on OCIMF & CDI, and its most important data when oil cargo transport. Therefore this study is provided a practical method to PIC of tanker shipping business & Designated Person, and it will be a basic of Ship Management for the activation of the Oil business.