• Biotechnology and Bioprocess Engineering:BBE
• /
• v.7 no.5
• /
• pp.268-274
• /
• 2002

Enzymatic hydrolysis of waste office paper was evaluated using three commercial cellulases, Acremonium cellulase, Meicelase, and Cellulosin T2. Varying the enzyme loading from 1 to 10% (w/w) conversion of waste office paper to reducing sugar was investigated. The conversion increased with the increase in the enzyme loading: in the case of enzyme loading of 10% (w/w), Acremonium cellulase yielded 79%conversion of waste office paper, which was 17% higher compared to Meicelase, 13% higher than that of Cellulosin T2. Empirical model for the conversion (%) of waste office paper to re-ducing sugar (x) was derived from experimental results as follow, x = $kE^{m}t^{(aE+b)}$ where k, m, a, and b de-note empirical constants. E indicates initial enzyme concentration.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.111-116
• /
• 2001

Waste office paper, photocopied or laser printed, has recently increased along with office automatization. In waste office paper, toner ink is used as the printing medium in place of conventional oil ink. Since toner ink cannot be saponificated by alkali and be decolored by bleaching, different from the case of oil ink, toner remains on regenerated paper as black specks. Although cascade recycling of waste office paper is compelled at present, the demand for low-grade paper is limited. From such circumstances, a new separation process for waste office paper is demanded to achieve parallel recycling. At the first stage of separation studies, the sharpness of separation is evaluated using small separators to obtain fundamental data. In a lab-scale separator, the sample amount of one feed is generally a few grams. However, the sample amount used for brightness, ERIC, and image analysis that are generally used to evaluate the efficiency of deinking are not small for lab-scale tests of these analyses. This paper describes an investigation of a sheet preparation method by a small amount of sample under 0.5g and compares the precision of toner content determination of spectroscopic analysis and image analysis from the viewpoint of separation evaluation. The easiness and convenience of the operation using only general-purpose equipments has also been set as a principle purpose. From the viewpoint of an analysis that yields high precision with a small amount of sample in short time, the method calculating the absorption coefficient from diffuse reflectance in the visible region is the most rational method in this study.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.1 s.109
• /
• pp.47-52
• /
• 2005

Enzymatic pulping properties of mixed office waste paper in standard disintegrator were investigated for successful enzymatic deinking of mixed office waste paper. Enzymatic pulping need more revolution in standard disintegrator than alkaline pulping and Cellusoft need more revolution than Denimax. The freeness of disintegrated pulp with enzyme was higher than those of disintegrated pulps with alkaline and heat killed enzyme. The freeness of disintegrated pulp with Denimax was higher than that of disintegrated pulp with Cellusoft. The freeness of disintegrated pulps were increased with a dosage of enzymes. The mechanical properties of disintegrated pulp were improved with enzyme addition comparing with heat killed enzyme. The tensile and burst index of hand sheet of disintegrated pulps with acidic Cellusoft were higher than that of others.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.1 s.109
• /
• pp.53-60
• /
• 2005

The mechanical properties of deinked mixed office waste paper in relation to sorts and dosage of enzymes were investigated for successful enzymatic deinking of mixed office waste paper. The increasing of $\Delta$. freeness was most predominant in pulp of Denimax treated pulp. The tensile and burst properties are decreased with enzyme dosage while $\Delta$. freeness were increased. The fine content in disintegrated pulp was decreased with enzyme dosage of $0.4\%$ on the dried weight of paper. The water absorption of handsheets of enzyme deinked pulp was like as that of market roll tissue papers and the mechanical properties of handsheets of enzyme deinked pulp were improved with enzyme treatment comparing of market roll tissue papers.

• New & Renewable Energy
• /
• v.17 no.2
• /
• pp.32-39
• /
• 2021

The optimal conditions for producing levulinic acid from office waste paper were investigated. Glucose was produced by enzymatic hydrolysis and its yield maximized by varying the soaking time of the substrate and amounts of enzyme and substrate. The optimal conditions to produce levulinic acid using the hydrolysate were determined by response surface methodology, with reaction temperature and catalyst (sulfuric acid) concentration as independent variables. The production model was assessed with an ANOVA regression analysis, and the results indicate its suitability for levulinic acid production (p, F, and lack-of-fit values were 0.003, 20.1, and 0.058, respectively). The optimal conditions were a reaction time of 56.27 min and catalyst concentration of 5.9% with a predicted yield of 2.588 g/L. We verified the findings under the same conditions and obtained 2.323 g/L of levulinic acid.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.3
• /
• pp.48-52
• /
• 2008

Waste paper plastic composites were prepared with old newspaper and old corrugated containers and mixed office waste and those properties were evaluated. The results were summarized as fellows. 1. The strength properties like as tensile and Young's modulus reveled most high level in MOW composite. 2. The coagulation of fibers in paper particle should interrupt equal dispersion of polymer and paper particle. 3. The micrograph of the surface of composites showed the most high dispersion in ONP composite.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.347-350
• /
• 2000

Enzymatic deinking of office-waste paper was studied using crude cellulase and papain-hydrolyzed cellulase from Trichoderma reesei Rut C-30 in small-scale and mid-scale. The results were compared with deinkings using commercial enzyme(Novozym 342) and conventional chemical methods. Maximum brightness and freeness were obtained at 3 units/g Oven Dry Paper(ODP) of CMCase activity using crude cellulase in mid-scale deinking experiments. The deinked pulp had higher physical strength and brightness, and lower freeness and yield than the pulp deinked in small scale. In small scale deinking, maximum brightness and freeness were obtained at 2 unit/g ODP. Deinking by papain-hydrolyzed cellulase showed similar results with one by Novozym 342. It was better in brightness and freeness, but showed lower physical strength and yield, than the conventional deinking by sodium hydroxide. The ratio of endo-1,4-glucanase and exo-1,4-glucanase components in papain hydrolyzed cellulase from T. reesei Rut C-30 was similar to that of commercial enzyme, Novozym 342, implicating a successful application as a deinking enzyme.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.4 s.107
• /
• pp.41-48
• /
• 2004

To make a basepaper for multipurposed seed paper, old news print (ONP) and mixed office waste paper (MOW), modified and unmodified with a commercial cellulase, were investigated. Each handsheet was applied with different chemicals such as insecticides, germicides and herbicides. The interactions behaviors of chemicals used with base papers were evaluated by means of the contents of chemicals impregnation and dissolving behaviors in water and soil. The ONP and MOW treated with the cellulase had higher impregnation and dissolving capacities in both water and soil than untreated ONP and MOW. However, the modified ONP showed lower impregnation and dissolving capacities compared to the modified MOW. The content of impregnation of chemicals would be affected with the degree of microfibrils produced by the modification treatment. Otherwise, dissolving capacities of chemicals depend on the affinity of the residual lignin in the paper.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.1
• /
• pp.24-29
• /
• 2004

Alkaline cellulolytic enzymes from cultured medium of Coprinus cinereus 2249 were purified with gel and ion-exchange chromatography and characteristics of those enzyme proteins were investigated. A fiber length distribution and a crystallinity of cellulose and sugar composition of enzyme treated Mixed Office Wastepaper(MOW) and Unbleached Kraft Pulp(UKP) were analysed. The conclusion could summarized as follows; \circled1 Alkaline and acidic, endo- and exo-glucanases were purified from cultured medium of Coprinus cinereus 2249. \circled2 The approximate molecular weight of alkaline endo-glucanase was 42 kDa, and also that of alkaline exo-glucanase was 50 kDa. A fiber length distribution and a crystallization of cellulose and sugar composition of enzyme treated MOW and UKP were not so much changed with original paper and pulp.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.2
• /
• pp.58-67
• /
• 2001

MOW (Mixed Office Waste) mainly consisted of photocopied paper is being recycled to produce tissue or fine paper products. Toner particles that are fused and set on paper surface in photocopying process turns into large and plate-shaped particles after repulping which prevents them to be removed effectively in flotation deinking. The immediate purpose of this study is to find the effective deinking technology that increases the recycling potential of photocopied papers for manufacturing tissue and fine paper products. In this study the effects of pulping temperature and the type of hydrophobic groups of nonionic surfactants on the deinking efficiency of photocopied paper has been investigated. Particle size distribution of the toner particles after pulping and flotation, brightness, yield and ash removal were investigated. The size of toner particles after pulping increased as the pulping temperature was increased. When pulping at the low temperature finer toner particles were generated, however, greater amount of toner particles was found to attach to the fiber. When the pulping temperature was greater than Tg of the toner, the amount of coarse hairy particles increased. When nonionic surfactants with a double bond in hydrophobic groups were used, toner removal efficiency, brightness and ash removal were increased. As the addition level of surfactant was increased, yield decreased rather sharply without improving brightness.