• Spatial Information Research
• /
• v.21 no.4
• /
• pp.71-81
• /
• 2013

Due to explosively increasing utilization in spatial information and a rapid development in geospatial technology related to national territorial and housing, there are increasing demands for converging spatial information on not only urban planning and real estate data but also newly generated data from smart phone, GPS to achieve comparative advantage of national territory. In this paper, we prospect the utilization of Converged Spatial Information(CSI) to future national territorial planning for the purpose of enhancing territorial competitiveness. For this purpose, considering the Korea Land and Housing corporation(LH) takes charge most of government's land and housing development projects, CSI usage of this company's 6 future business domains until 2029 were used as a case study. Also, 7 CSIs derived from literature review were surveyed to find the degree of CSI utilization in the national territorial future. In the analysis result, it was found that 3D data and mobile data among others have higher degree of utilization, and urban and regional development is the most highly utilizable domain for CSIs. After all, to revitalize the use of CSI in national territorial future, it is required to do a balanced construction of territorial use spatial information about marine use, coastal use, underground space besides land use.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.127-136
• /
• 2019

Tunnel construction by TBMs should be supported by the performance of a screw conveyor in order to obtain the optimum penetration rate, so studies related to the screw conveyor performance have been being conducted. Compared to the study on the performance of the screw conveyor for the soil, however, the research on the performance of the screw conveyor for the rock is insufficient. Considering the domestic tunnel sites with more rock layers than soil layers, simulation of discharge of 6 types of rock chips by the screw conveyor was conducted using DEM. Regardless of the shape and volume of the rock chips, the discharge rates of the rock chips by the parallel placed screw conveyor at a speed of 10 RPM in the same rock mass were about 20% (standard deviation: 1.3%) of the maximum volume of discharge rate by the screw conveyor. It is expected that this study can be used as a reference material for screw conveyor design and operation in TBM excavations in rock masses.

• The korean journal of orthodontics
• /
• v.33 no.4 s.99
• /
• pp.307-317
• /
• 2003

Conventional osseointegrated titanium implants have many limitations; large size, limited location for placement of the implant, severity of the surgery, discomfort of initial healing, difficulty of oral hygiene and uncontrollable force direction. Recently titanium miniscrew and miniplate have been used for an alternative to conventional dental implant. But in relation to miniplate, miniscrew has disadvantages in that more potential inflammation, light orthodontic force application and limited orthodontic application. This study was conducted to evaluate the effectiveness of miniplate by observing the reactions of peri-implant tissues to early orthodontic and orthopedic loading of titanium miniplate. In four adult beagle dogs 10 miniplates were inserted into the alveolar bone using 20 osseointegrated titanium screws. 4 miniplates were placed in two dogs(dogA, B) and 6 miniplates in two dogs(dogC, D). In dogA, B miniplates were loaded with 200gm of force immediately after placement for 15 weeks. In dogc, D, miniplates were loaded with 400gm of force immediately after placement for 8 weeks. Miniplates of dogA were removed, dogA was healed for 4 weeks, and the area which was removed of miniscrew was examined. Following an observation period, the miniplates including miniscrews and the surrounding bone of dogB and dogC, D were removed, respectively. Undecalcified section along the long axis of miniscrews were made and the degree of osseointegration was examined under the light microscope. The results were as follows. 1. In the histologic features there was direct contact between bone and miniscrew in all groups except one, dogC control group. The loaded miniscrew demonstrated only a slight increase of the osseous proximaty when compared with unloaded miniscrew 2. There was no significant difference of the osseointegration of Peri-miniscrew surface between dogB and dogC, D. But dogB showed slightly more increased bone apposition than dogC, D 3. The gingiva overlapping the miniplate and miniscrew showed no inflammatory sign in clinical and histological aspects. 4. The impaled hard and soft tissues at the area which was removed of miniscrews showed good healing without inflammatory reaction. 5. The mobility showed slight increase in un-loaded miniplate but that was insignificant. Based on the results of this study, miniplate(C-tube) can be used as a firm osseous orthodontic and orthopedic anchorage unit immediately after insertion.

• Journal of dental hygiene science
• /
• v.9 no.1
• /
• pp.9-15
• /
• 2009

Aimed at office workers at their height of Temporomandibular joint disorder(TMD), organized self-filling questionnaires were distributed from January 7 to 26, 2008 to 216 workers in the fields of service, office work, and production in D metropolitan city, to get a proper recognition about prevention and treatment of TMD by observing how strongly occupational stress influence on them. The findings of the study were as follows: 1. For subjective symptoms of joint noise as TMD, occasional was 45.8% and often 12.0%, while for joint dislocation often was 12.0%. 41.2% said they feel pains while chewing, while 24.1% said they occasionally feel pains while not chewing. 2.8% said they often experience mouth-opening disorder. 2. For joint noise, answers were significantly different according to their ages, while 30's are at their height (P < 0.05). For joint dislocation, the shorter they worked the more they have it, so less than a year worker was 37.9%, while less than 3 years 31.0%, and less than 5 years 20.7%. For work type, daytime workers have more dislocation, 58.6%, than shift-workers 34.5% (P < 0.05, P < 0.01). For pains while chewing, the shorter they worked, the more they experienced, which is the same as mouth-opening disorder (P < 0.01). 3. Workers with mouth-opening disorder have much stress on occupational autonomy (P < 0.05) and workers with dislocation and pains while chewing have much stress on relation trouble (P < 0.05, P < 0.01). Workers with highly occupational insecurity has much trouble on dislocation and pains while chewing, while workers with dislocation have significantly much stress on unproper compensation (P < 0.05). 4. For who have joint dislocation, they have much stress on relation-trouble, occupational disorder, and un-proper compensation (P < 0.01, P < 0.05). Workers with pains while not chewing showed significant difference about occupational insecurity and relation troubles (P < 0.05, P < 0.01). Who have mouth-opening disorder showed significant difference about occupational autonomy (P < 0.05).

• Journal of Korean Society of Transportation
• /
• v.19 no.1
• /
• pp.101-114
• /
• 2001

Transportation enterprises should maintain constant and qualitative operation. Thus, in short period, transportation enterprises don't change supply in accordance with demand. In the result, transportation enterprises don't reduce operation in spite of management deficit at will. In freight transportation type, less-than-truckload(LTL) has more relation with above transportation feature than truckload(TL) does. Because freight transportation supply of TL is more flexible than that of LTL in correspondence of freight transportation demand. Relating to above mention, it appears that shortage of road and freight terminal of LTL is larger than that of TL. Especially in road and freight terminal comparison, shortage of freight terminal is larger than that of road. Shortage of road is the largest in 1990, and improved after-ward. But shortage of freight terminal is serious lately. So freight terminal needs more expansion than road, and shows better investment condition than road. Freight terminal expansion brings road expansion in LTL, on the contrary, freight terminal expansion substitutes freight terminal for road in TL. In transportation revenue, freight terminal's contribution to LTL is larger than that to TL. However, when we adjust quasi-fixed factor - road and freight terminal - to optimal level in the long run, in TL, diseconomies of scale becomes large, but in LTL, economies of scale becomes large. Consequently, it is necessary for TL to make counterplans to activate management of small size enterprises and owner drivers. And LTL should make use of economies of scale by solving the problem, such as nonprofit route, excess of rental freight handling of office, insufficiency of freight terminal, shortage of driver, and unpreparedness of freight insurance.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.11
• /
• pp.1132-1138
• /
• 2008

The study was carried out to investigate adsorption characteristic on hydrogen sulfide (H$_2$S) and methylmercaptan (CH$_3$SH) odor gas using the char made by a thermal decomposition of sewage sludge. The fixed bed adsorption experiments of the optimum L/D ratio could be 1.0, and adsorption capacity and break point increased with the increase of temperature. A simultaneous adsorption characteristic of H$_2$S and CH$_3$SH increased in breakthrough time and adsorption capacity more than single adsorption experiment, and CH$_3$SH had higher effective diffusivities than H$_2$S in same condition. The adsorption capacity of CH$_3$SH increased with fast velocity. When it was compared the produced absorbent with commercial activated carbon, As to adsorbent amount, it was H$_2$S 77% and CH$_3$SH 80% of commercial activated carbon.

• Journal of the Korean Geographical Society
• /
• v.42 no.4
• /
• pp.506-525
• /
• 2007

Incision into bedrock channel is the primary control of landform evolution, but research into bedrock incision process stagnated for long time. Due to the scaling problem of the application of results from flume studies to bedrock channel, there is a strong need to simulate the bedrock incision process with more realistic models. As a part of investigation into controls of bedrock channel incision, three-dimensional changes of rock surface with abrasion was investigated with physical modelling. 18 rock plates were abraded with various sediment particle size and sediment load and abraded surfaces of the plates were scanned with high resolution 3-D scanner. To identify the spatial pattern of erosion of the rock plates, various methods were used. There was no synthetic or holistic method that showed all features of bedrock plate produced by abrasion, so each plate was analyzed using some available methods. Contour maps, shaded relief maps and profiles show that abrasion concentrated on the centre of plate (cross profile) and upstream and downstream edges (longitudinal profile) and eroded area extended inwards. It also found that the cracks and boundaries of forming materials easily eroded than other parts. Changing patterns of surface roughness were investigated with profiles, regression analysis and spectral analysis. Majority of plates showed decrease in small-scale roughness, but it depends on microstructures of the plates rather than general hardness or other factors. SEM inspection results supported this idea.

• Journal of Environmental Impact Assessment
• /
• v.28 no.6
• /
• pp.592-603
• /
• 2019

This study is about the implementation of low energy sewage management technology through effective control of blower which consumes the most energy in sewage treatment. In calculating the amount of oxygen required for microorganisms, unlike the existing method using the operating index in the bioreactor or TMS data in the discharge port, the CODcr and NH₄⁺-N concentration changes in sewage flowing into the sewage treatment plant were detected in advance before entering the bioreactor and the amount of air was controlled based on this. The pre-sensing was found to have a high correlation compared with conventional products. As a result of blower control, it was possible to save about 9.9% energy more than the manual control. Consequently, this study suggested the possibility of blower's real-time control combined with pre-sensing technology. Also, it is expected that the low energy sewage treatment can be applied to sewage treatment facilities dependent on operation by manpower, and it will contribute to the reduction of greenhouse gas emissions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.343-351
• /
• 2019

The purpose of this study is to investigate the effects of work environmental factors and self-compassion on the burnout of school counselors. The subjects of this study were 312 school counselors under the D District Office of Education participated. In order to examine the effects of individual, organizational, and self-compassion factors on burnout, correlation and hierarchical regression were applied. Individual factors were gender, age, health status, and personal hobbies. Organizational factors were employment type, working hours, and job satisfaction. Self-compassion and burnout were measured using the Korean version of self-compassion and Baslach burnout instruments. The correlation analysis showed that the three factors are correlated with each other. In the hierarchical regression analysis, three models were developed as personal, organizational, and self-compassion factors. The results of regression analysis are as follows. The influence of self-compassion on burnout was stronger than the organizational factor (i.e., employment type, working time, job satisfaction) and the personal factor (i.e., age, health status, hobby). There were no significant differences between genders. This study results suggest that self-compassion can reduce a level of burnout significantly, although personal and organizational factors have a significant impact on burnout. Further study and suggestions for reducing the level of burnout of school counselors were discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.159-170
• /
• 2021

As the main purpose of R&D changes from the center of knowledge creation to the center of economic value creation through technology transfer and commercialization, public technologies can also secure economic feasibility as well as make a social contribution. Korea has been focusing on fostering core human resources who can lead the commercialization of basic and original research results by launching the 'Support project for exploring startups linked with public technology-based markets' since 2015 in order to promote public technology startup. This study is based on the results of a survey for the purpose of analyzing the performance of this project. In addition, this study derived four factors related to the I-corps project performance from the results of this survey and verified the relationship between these factors through structural equation model analysis. In summary, it was confirmed that 'Application Level' and 'Business Model,' which are positively affected directly from 'Entrepreneurship Learning,' have positive effects on 'Financial Resources'. Furthermore, the indirect effect of 'Entrepreneurship Learning' on 'Financial Resources' was verified. In particular, the high level of impact of 'Entrepreneurship Learning' on 'Application Level,' and the impact of 'Application Level' on 'Business Model' and 'Financial Resources' were also positive.