• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.7
• /
• pp.2409-2420
• /
• 1996

This paper describes the development of a general program for the design and part load performance analysis of single-shaft-heavy-duty gas turbines. Efforts are made to fully represent the real component features by the characteristic models and special emphasis is put on the modeling of cooled turbine stages. The design analysis routine is applied to simulate the performance of current gas turbines and its appropriateness for system analysis is validated. Meanwhile, the component parameters of real engines which describe the technology level are obtained. The program is extended to predicting the part load operation of gas turbines with the aid of models for the off-design characteristics of compressor, turbine and other main components. Part load simulation can be carried out only with limited numbers of input data. It is demonstrated that the program accurately estimates the part load characteristics of real turbines.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.1
• /
• pp.49-55
• /
• 2003

This paper presents the experimental results to verify the environmental consciousness with economic balances due to cutting fluid behaviors and effectiveness in machining process. The cutting fluid improves the productivity through cooling, lubricating effects, however its environmental impact also increases according to the cutting fluid usage. The primary mechanism in this study is the spin-of motion of cutting fluids away from the rotating workpiece. In this study some machining parameters are adopted to analyze the productivity as well as environmental impact. This study provides the criteria for the resonable cutting fluid usage quantitatively to develop the environmentally conscious machining process.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.3
• /
• pp.73-79
• /
• 2002

This paper presents the experimental results to verify the environmental consciousness with economic balances due to cutting fluid behaviors, effectiveness in machining process. Even though cutting fluid improves the Productivity through the cooling, lubricating effects, its environmental impact is also increased according to the cutting fluid usage. The primary mechanism considered in this study is the spin-off motion of fluids away from rotating workpiece. In this study some parameters arc adopted to analyze the productivity(tool wear), environmental impact(mist diffusion rate). The results present talc criteria for the resonable cutting fluid usage quantitative1y to develop the environmentally conscious machining process.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.3
• /
• pp.132-138
• /
• 2005

In this paper a DPDT(Double-Pole Double Through) switch with defected ground structure(DGS) is proposed. The equivalent circuit for the proposed switch structure is derived according to based on equivalent circuit of proposed DGS unit structure. The equivalent circuit parameters of DGS unit are extracted by using the circuit analysis method. The on/off operation of the proposed switch is obtained by varying the capacitance of the varactor diode at the defected ground plane. In the case of ON state, the insertion loss of the fabricated DPDT was shown under 1dB. And in OFF state, we found the rejection characteristic over 20dB at the designed frequency 2.45GHz. The experimental results show excellent insertion loss at on state and isolation at off state.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.4
• /
• pp.515-523
• /
• 2012

Objective: The aim of this study is to investigate users' intuitive stereotypes on non-touch gestures and establish the gesture dictionary that can be applied to gesture-based interaction designs. Background: Recently, the interaction based on non-touch gestures is emerging as an alternative for natural interactions between human and systems. However, in order for non-touch gestures to become a universe interaction method, the studies on what kinds of gestures are intuitive and effective should be prerequisite. Method: In this study, as applicable domains of non-touch gestures, four devices(i.e. TV, Audio, Computer, Car Navigation) and sixteen basic operations(i.e. power on/off, previous/next page, volume up/down, list up/down, zoom in/out, play, cancel, delete, search, mute, save) were drawn from both focus group interview and survey. Then, a user participatory design was performed. The participants were requested to design three gestures suitable to each operation in the devices, and they evaluated intuitiveness, memorability, convenience, and satisfaction of their derived gestures. Through the participatory design, agreement scores, frequencies and planning times of each distinguished gesture were measured. Results: The derived gestures were not different in terms of four devices. However, diverse but common gestures were derived in terms of kinds of operations. In special, manipulative gestures were suitable for all kinds of operations. On the contrary, semantic or descriptive gestures were proper to one-shot operations like power on/off, play, cancel or search. Conclusion: The touchless gesture dictionary was established by mapping intuitive and valuable gestures onto each operation. Application: The dictionary can be applied to interaction designs based on non-touch gestures. Moreover, it will be used as a basic reference for standardizing non-touch gestures.

• Journal of Power Electronics
• /
• v.19 no.1
• /
• pp.11-23
• /
• 2019

In this study, a novel zero voltage zero current transition (ZVZCT) bidirectional DC-DC converter is proposed by employing coupled inductors. This converter can turn the main switch on at ZVZCT and it can turn it off with zero voltage switching (ZVS) for both the boost and buck modes. These characteristics are obtained by using a simple auxiliary sub-circuit regardless of the power flow direction. In the boost mode, the auxiliary switch achieves zero current switching (ZCS) turn-on and ZVS turn off. Due to the coupling inductors, this converter can make further efficiency improvements because the resonant energy in the capacitor or inductor can be transferred to the load. The main diode operates with ZVT turn-on and ZCS turn-off in the boost mode. For the buck mode, there is a releasing circuit to conduct the currents generated by the magnetic flux leakage to the output. The auxiliary switch turns on with ZCS and it turns off with ZVT. The main diode also turns on with ZVT and turns off with ZCS. The design method and operation principles of the converter are discussed. A 500 W experimental prototype has been built and verified by experimental results.

• Communications for Statistical Applications and Methods
• /
• v.15 no.6
• /
• pp.883-897
• /
• 2008

This paper provides correct informations inflecting the present situation using the sample design in population that the National Statistical Office puts in operation of the mining and manufacturing industry statistical survey in 2006. This paper proposes new sampling design which is able to grasp business fluctuations and provide basic data for the rearing policy and management of the material industry and components industry. These sample design are the modified cut-off method and multivariate Neyman allocation using principal components and sampling method is the probability proportional systematic sampling.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.4
• /
• pp.829-838
• /
• 2016

This paper focuses on the engineering trade-offs in designing capacitor voltage balancing schemes for modular multilevel converters (MMC) HVDC: regulation performance and switching loss. MMC is driven by the on/off switch operation of numerous submodules and the key design concern is balancing submodule capacitor voltages minimizing switching transition among submodules because it represents the voltage regulation performance and system loss. This paper first introduces the state-of-the-art MMC-HVDC submodule capacitor voltage balancing methods reported in the literatures and discusses the trade-offs in designing these methods for HVDC application. This paper further proposes a submodule capacitor balancing scheme exploiting a control signal to flexibly interchange between the on-state and the off-state submodules. The proposed scheme enables desired performance-based voltage regulation and avoids unnecessary switching transitions among submodules, consequently reducing the switching loss. The flexibility and controllability particularly fit in high-level MMC HVDC applications where the aforementioned design trade-offs become more crucial. Simulation studies for MMC HVDC are performed to demonstrate the validity and effectiveness of the proposed capacitor voltage balancing algorithm.

• Tribology and Lubricants
• /
• v.28 no.5
• /
• pp.197-202
• /
• 2012

In this study, with the purpose of fundamentally improving the unbalance response vibration of a large PRT motor-generator rotor by design, a performance improvement design analysis is carried-out by retrofitting tilting pad bearings, replacing the plain partial journal bearings that were originally applied for operation at a rated speed of 1,800 rpm. In this process, a goal of the design analysis is to obtain a design solution for maximizing the direct stiffness of the bearings while satisfying the key basic lubrication performance requirements such as the minimum lift-off speed and maximum oil-film temperature. The results show that with a careful design application of tilting pad journal bearings for operation at such a relatively low speed of 1,800 rpm, direct stiffness increment of the bearings by about two times can be effectively achieved. Prevention of pad unloading is also considered in the analysis. Moreover, the designs of elliptical and offset half journal bearings are also analyzed and reviewed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7C
• /
• pp.735-742
• /
• 2006

In this paper, we explain the operation scheme and fixed-point design method of DFE (Digital Front End), which performs DC offset compensation, automatic frequency control, and automatic gain control over the input signal to the UE (User Equipment) receiver of IEEE 802.16e OFDMA-TDD system. Then, we analyze the performance of DFE under ITU-R M. 1225 Veh-A 60km/h channel environment. To optimize the fixed-point design of DFE, we reduce the number of bit resulted from calculation without performance degradation, leading to the decreased complexity of the operation in H/W, and design the Loop filter with considering trade-off between the Acquisition time and the Stability.