International Journal of Precision Engineering and Manufacturing

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Analysis of Cutting Fluid Atomization and Environmental Impact through Spin-Off Mechanism in Turning Operation for Environmentally Conscious Machining (I)

  • Joon Hwang (Department of Mechanical Design, ChungJu National University) ;
  • Chung, Eui-Sik (Department of Mechanical Design Engineering, Hanbat National University)
  • Published : 2003.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents the experimental results to verify the environmental consciousness with economic balances due to cutting fluid behaviors and effectiveness in machining process. The cutting fluid improves the productivity through cooling, lubricating effects, however its environmental impact also increases according to the cutting fluid usage. The primary mechanism in this study is the spin-of motion of cutting fluids away from the rotating workpiece. In this study some machining parameters are adopted to analyze the productivity as well as environmental impact. This study provides the criteria for the resonable cutting fluid usage quantitatively to develop the environmentally conscious machining process.

Keywords

References

  1. Preifer, T., Evershein, W., Keonig, W., Manufacturing Excellence, Chapman & Hall, pp. 517-521, 1994
  2. U.S. Department of Health and Human Services, Occupational Exposure to Metalworking Fluids, NIOSH Publication, 1998
  3. Bell, D. D., Chou, J., Liang, S. Y., 'Modeling of Cutting Fluid Effect on Shop Floor Environment,' Tribology Transactions of STLE, Vol. 42, No. 1, pp. 168-173, 1999 https://doi.org/10.1080/10402009908982204
  4. Matsumoto, S., Takashima, Y., 'Atomization Characteristics of Power Law Fluids by Rotating Disk,' ICLAS-78, pp. 145-150, 1978
  5. Hwang, J., Chung, E. S., 'Optimization of Cutting Fluids for Environmentally Conscious Machining,' Proc. Annual Conference on Korean Society of Precision Engineering, Vol. 2, pp. 948-951, 2000