• Journal of Environmental Health Sciences
• /
• v.27 no.4
• /
• pp.85-91
• /
• 2001

The regulation of Material safety data sheets(MSDS) was required for the chemicals in use in the workplace from July 1976. Under the provisions of the workplace hazardous materials information system, employers in Korea must be provided with accurate and comprehensive MSDS. To examine the reliability of MSDS for organic solvents, 63 organic solvents and MSDS were collected from the workplace of 39 companies located in Kyonggi province. Manufacture\`s MSDS were compared with the actual composition of the collected samples, and further examined the reliability by checking whether the chemicals analyzed were included in the MSDS correctly. 38 solvents were able to analyze their composition by gas chromatography-mass selective detector(GC-MSD). Among them, 28 solvents were incorrect in their composition and contents. In some case, health hazardous or carcinogenic chemicals which were not included in the MSDS were detected from samples. As a result of evaluating whether the MSDS correspond to the regulation required by Industrial Safety and Health Act (ISHA), the information in the MSDS including hazard classification, occupational exposure level, toxicity, regulatory information were incorrectly provided, and some MSDS did not disclose carcinogenic in their MSDS, and some MSDS were not written in the standard format. From this survey, continuous monitoring and promoting correct MSDS, and analyzing the components of the solvents were required to endure the reliability of MSDS for organic solvents.

• Journal of agricultural medicine and community health
• /
• v.31 no.3
• /
• pp.219-236
• /
• 2006

Objectives: To develop a model of a official management system for agricultural disease, injury and accidents, We analyzed current Korean status and management system about occupational injury and accident of farmers. Methods: For national management systems of industry safety and health and current status of occupational injuries and accidents of farmers, related literature such as books, theses, articles, and web documents were collected and analyzed. Results and Conclusion: The regulations of protecting occupational injury and accidents of farmers are suggested as follows: (1)insurance and compensation act for occupational injury and accident of farmers, (2)setting standards of occupational injuries and accidents of farmers, (3)mandating the usage of safety devices for agricultural vehicles and equipments, (4)reporting occupational injuries and accidents that occur among farmers, (5)registering pesticides and assessing safety usage, (6)implementing safety training, (7)supporting personal protective equipments and agricultural safe facilities etc.

• Journal of the Korean Society of Safety
• /
• v.30 no.5
• /
• pp.108-113
• /
• 2015

Plastic injection moulding machine is widely used for many industrial field. It is classified into mandatory safety certification machinery in Industrial Safety and Health Act because of its high hazard. In order to prevent industrial accidents by plastic injection moulding machine, it is necessary for designer to identify hazardous factors and assess the failure modes to mitigate them. This study tabulates the failure modes of main parts of plastic injection moulding machine and how their failure has affect on the machine being considered. Failure Mode & Effect Analysis(FMEA) method has been used to assess the hazard on plastic injection moulding machine. Risk and risk priority number(RPN) has been calculated in order to estimate the hazard of failures using severity, probability and detection. Accidents caused by plastic injection moulding machine is compared with the RPN which was estimated by main regions such as injection unit, clamping unit, hydraulic and system units to find out the most dangerous region. As the results, the order of RPN is injection unit, clamping unit, hydraulic unit and system units. Barrel is the most dangerous part in the plastic injection moulding machine.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.20 no.1
• /
• pp.1-9
• /
• 2010

Objectives : The purposes of this study were to evaluate exhaust ventilation systems(EVSs) and to suggest problems and improvements. Methods : For 50 small and medium-sized enterprises, we carried out evaluation of EVSs. We evaluated hoods with smoke tester and measurement of capture velocity. In addition, we used several indicators for performance evaluation designed in this study. Results : 1. Based on the smoke flow pattern and the criteria of occupational health and safety act, 67.8% of hoods were rated 'good' level at smoke test whereas 26.3% were rated 'good' level at measurement of capture velocity. 2. 29.3% of hoods, of which ratio of measured actual air flow at hood(Qah) to required ideal exhaust air flow at hood(Qih) was 1 or more, were rated 'good' level. 3. The % of EVS, of which ratio of measured actual air flow at stack(Qast) to total required ideal exhaust air flow at hood(Qith) was 1 or more, was 29.0%. 4. For the ratio of measured Qast to existing air flow at fan(Qfan), only 5% of EVSs were 1 or more and 26.0% were 0.8 or more but less than 1.0. 5. For the ratio of measured Qast to total measured actual exhaust air flow at hood(Qath), 74.0% were 0.8 or more but less than 1.0. 6. The percentage of EVS, of which ratio of total measured Qath to existing Qfan was 0.8 or more, was 19.0%. 7. The percentage of EVS, of which ratio of total measured Qath to total required ideal exhaust Qith was 1 or more, was 26.0%. 8. For the comprehensive evaluation indicators designed in this study, 29.0% were 0.8 or more. Conclusions : We found that few exhaust local ventilations at small and medium-sized enterprises were rated 'good' level and that most exhaust local ventilations had 'poor' design and installation. Therefore, relevant professional manpower and enterprises have to construct exhaust local ventilation where it is needed, and technical guidance and economic support are needed to improve 'poor' exhaust local ventilation after self-evaluation.

• Journal of the Korean Society of Safety
• /
• v.20 no.1 s.69
• /
• pp.137-142
• /
• 2005

This study aims to survey the fatal industrial accidents attributed to crane, and to present their preventive measures based on the results of the survey. The survey was on the basis of 60 fatal accidents caused by crane from January 1998 to July 2003. The results showed that 1) of varying types of crane, fatal accidents were most frequently caused by mobile no: 2) more crane accidents occurred on weekend of Friday and Saturday by a day of the week; 3) experienced crane operators with long length of work or the age of over 40 were more frequently subjected to fatal accidents compared to novice operators; and 4) crane accidents were more attributable to unsafe acts such as poor working method, non-observance for safe working rules, etc. than hardware aspects of crane itself. It is recommended that for reducing crane accidents, more practical education and training for crane operation be reinforced.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.723-733
• /
• 2020

Purpose: This study was designed to draw up problems with the safety and health diagnosis system, and designed a hierarchical survey model of the clauses prescribed by the Occupational Safety and Health Act. The purpose of the survey is to derive the effectiveness of the safety and health diagnosis system at the construction site by targeting three groups of experts. Method: This paper set up the legal status analysis and overseas related system analysis and AHP hierarchy analysis survey model. In addition, the validity of the analysis results was verified by a survey. Results: The analysis of the survey items showed a high importance on items included in the human utilization and the precision of the pre-plan. In particular, mid-sized construction companies showed the highest importance for their active activities after the safety and health diagnosis. Conclusion: Through this study, we should recognize problems for improving the safety and health system of construction industry and prepare policy and institutional improvement measures for experts.

• Journal of the Society of Disaster Information
• /
• v.18 no.3
• /
• pp.478-486
• /
• 2022

Purpose: Although the working environment is measured at the construction site, only a few noise and vibration that are typically exposed for each process are performed without measuring the working environment by segmenting the exposed harmful factors. Therefore, it is intended to find the harmfulness of silicon oxide dust, which is most exposed at construction sites, and the complementary points of improvement measures currently being implemented at construction sites. Method: The status was analyzed using the actual condition survey report issued by the Korea Occupational Health Corporation and the Korea Occupational Health Association and data from the work environment measurement institution, and compared and analyzed with the rules on work environment measurement of the Occupational Safety and Health Act. Result: The harmfulness of silicon oxide dust was identified and improvement measures were derived. Conclusion: It is expected that occupational diseases against silicon dust can be reduced if the harmfulness of silicon oxide dust at construction sites is derived and improvement measures are actively applied at the site.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.1
• /
• pp.125-155
• /
• 1999

The objectives of this study were (1) an investigation of the current status of the hazardous substances, (2) a comparative analysis of classification system of hazardous substances between Korea and other countries, (3) a development of the new classification system in Korea, finally a review of prerequisites for effective enforcement of the new system. The results are summarized as follows : 1) The backbone of classification system of hazardous substances in Korea is based on Japanese classification system and EC(European Committee) guideline of hazardous substance. There are many problems in managing and handling of hazardous substances due to discordant of Japanese and EC system. It is desirable to revise the classification system to be harmonized with international guideline for example, guideline of IFCS(The Inter-governmental Forum on Chemical Safety) and EC guideline. 2) There are several problems in definitions of corrosive, sensitizing and irritation in MSDS Code of Ministry of Labour. It is desirable to reform those definitions. 3) Among the hazardous substances under the current system, there are several substances such as, beta-propiolactone, methyl bromide, ethyleneimine, etc that are not used and produced in Korea. It is desirable to exclude the substances from the list of controlled substances. 4) The section 39, about 'substance that designated to attach warning label' in Korea Occupational Safety and Health Act(OSHAct) should be eliminated, because above section is unnecessary under the MSDS system. 5) The researchers recommend to establish a new list of hazardous substance which are controlled by OSHAct. It is desirable that the new list is consist of two types. The first type is 'a list of the specially controlled substances' and the other is 'the generally controlled substances'. 6) It is recommended that the specially controlled substances should include hazardous substances that are highly toxic and widely used in Korea. And the generally controlled substances should include hazardous substances that can be analysed by instrument and carry threshold. limit values(TLV's).

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.3
• /
• pp.59-64
• /
• 2009

This study is to analyse the causes of accident in small and medium-sized construction sites and to provide prevention strategies and system improvement guidance. Although occupational safety and health act regulates the standards and installations of temporary structures, about an half of construction accidents were caused by poor temporary structures such as guardrails, scaffolds, work platforms, etc. It investigated 51 construction sites which is located in metropolitan area by asking a series of questions including their knowledge about regulations and opinions about prevention strategies. The result shows that many of the respondents do not have sufficient understandings about the regulations, and it implies that education and training must be reinforced in order to enhance the safety-awareness and to develop the comprehension of regulations.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.335-336
• /
• 2023

The military has adopted and implemented risk assessment since 2013 to reduce fatalities and accident rates at construction sites. However, risk assessment is carried out as a voluntary preventive activity and is maintained as a superficial administrative process for owners. Risk assessment must comply with the Occupational Safety and Health Act and the Enforcement Guideline of Risk Assessment. However, the scope of the assessment covers many industries, including manufacturing and distribution, making it difficult to apply to construction sites. As a result, the guidelines are interpreted and applied differently at each construction site. This study aims to improve the risk assessment system so that it is applicable to construction projects and proposes the improvement of the risk assessment system by analyzing the current status of serious accidents in military construction projects.