• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.321-322
• /
• 2007

• 한국정밀공학회지
• /
• 제20권1호
• /
• pp.214-221
• /
• 2003

In this study, based on the effect of the interaction of fracture mechanics by graphite and fatigue limit phenomena of the microscopic observation various matrix structure, spheroidal ratio, size of graphite and distribution etc. parameters containd with Ductile Cast Iron. Therefore, in this study, different ferrite-pearlite matrix structure and spheroidal ratio of graphite of 70%, 80% and 90%, GCD40, GCD45-1 and GCD45-2 series and three different ferrite-pearlite matrix structure, GCD 45-3, GCD 50, GCD 60 series, all of which contain more than 90% spheroidal ratio of graphite, were used to obtain the correlation between mean size of spheroidal graphite and fatigue strength. (1) 73% pearlite structure had the highest fatigue limitation while 36% pearlite structure had the lowest fatigue limitation among ferrite-pearlite matrix. the increase in spheroidal ratio with increasing fatigue limitation, 90% had the highest, 14.3% increasing more then 10%, distribution range of fatigue life was small in same stress level. (2) (equation omitted) of graphite can be used to predict fatigue limit of Ductile Cast Iron. The Statistical distribution of extreme values of (equation omitted) may be used as a guideline for the control of inclusion size in the steelmaking processes.

• International journal of advanced smart convergence
• /
• 제9권4호
• /
• pp.42-51
• /
• 2020

In this paper, the authors propose the pseudo complex correlation coefficient (PCCC) of the two complex random variables (RV), because the four real correlation coefficients (RCC) of the corresponding four real RVs cannot be obtained only from the complex correlation coefficient (CCC) of given two complex RV. Such observation is motivated by the general statement; "The complex jointly-Gaussian random M-vector cannot be completely described by the complex covariance matrix, even though the real Gaussian random 2M-vector can be completely descried by the real covariance matrix. Therefore, in order to describe completely the complex jointly-Gaussian random M-vector, we need an additional matrix, namely the complex pseudo-covariance matrix, along with the complex covariance matrix." Then, we apply PCCC to correlated information sources (CIS) for non-orthogonal multiple access (NOMA) in 5G system, and investigate impact of the proposed PCCC on the achievable data rate of the stronger channel user in the conventional successive interference cancellation (SIC) NOMA with CIS. It is shown that for the given same CCC, the achievable data rates with the different PCCC are different, because the corresponding RCC are different. We also show that as the absolute value of the same CCC increases, the impact of the different PCCC becomes more significant.

• 대한금속재료학회지
• /
• 제46권7호
• /
• pp.403-411
• /
• 2008

Zr-based amorphous alloy matrix composites reinforced with tantalum continuous fibers were fabricated by liquid pressing process, and their microstructures and mechanical properties were investigated. About 60 vol.% of tantalum fibers were homogeneously distributed inside the amorphous matrix, which contained a small amount of polygonal crystalline particles. The ductility of the tantalum-continuous-fiber-reinforced composite under tensile or compressive loading was dramatically improved over that of the monolithic amorphous alloy, while maintaining high strength. The consequential observation of the tensile deformation and fracture behavior of the composite showed the formation of multiple shear bands and multiple necking, crack deflection in the amorphous matrix, and obstruction of crack propagation by ductile fibers, thereby resulting in very high tensile elongation of 7.2%. These findings suggested that the liquid pressing process was useful for the development of amorphous matrix composites with improved ductility.

• 지구물리와물리탐사
• /
• 제26권4호
• /
• pp.268-274
• /
• 2023

유한 단층 미끌림 역산에는 지진 변위 측지 자료와 그린 함수 행렬(Green's function matrix)을 주로 사용한다. 그린 함수 행렬은 일반적으로 오카다 모형(Okada, 1985)을 기반으로 한다. 그러나 최근 물리 기반 지진 모델링을 활용하여 그린 함수 행렬을 제작하고 유한 단층 미끌림 역산을 수행하는 연구가 활발하다. 물리 기반 지진 모델링은 다양한 물성(탄성, 점탄성, 탄소성 등)을 고려하여 현실적인 환경에서 지진을 모사할 수 있다는 장점이 있다. 물리 기반 유한요소 소프트웨어 PyLith는 단층을 구성하는 절점을 두 개로 나누어 지진을 모사할 수 있으므로 지진 모사 모델링에 적합하다. 하지만 PyLith는 격자망 생성 기능을 자체 제공하지 않아, 모형 내부에 수십~수백 개의 소단층과 관측점을 설정해야 하는 유한 단층 미끌림 역산 수행에는 어려움이 있다. 본 연구에서는 소단층과 관측점을 포함한 수치 모형을 제작하고, 지진 모사 모델링을 수행하여 그린 함수 행렬을 제작하는 일련의 과정을 연계하여 유한 단층 미끌림 역산의 편리성을 높이기 위해 CPInterface (COMSOL-PyLith Interface)를 개발하였다. CPInterface는 COMSOL의 격자 생성 능력과 PyLith의 지진 모사 능력을 결합하여 그린 함수 행렬을 자동으로 생성할 수 있다. CPInterface는 간단한 변수들로 모형 및 단층 정보를 조절할 수 있고, 지하 탄성 이상체와 GPS 관측점을 자유롭게 배치할 수 있다. 또한, 그린 함수 행렬을 생성하는 복잡한 과정을 간소화하여 더욱 편리하게 유한 단층 미끌림 역산을 할 수 있게 한다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.44-48
• /
• 2009

In this study, a vortex visualization method based on the vorticity magnitude is developed. One of the simplest models for a vortex is a vortex filament with the maximum vorticity on its center. The proposed method is based on the observation of this ideal distribution of vorticity magnitude. Laplacian and Hessian matrix of vorticity magnitude are tested for detecting the local maximum of vorticity magnitude. These ideas were applied to wake flow past a sphere. It was found that the Laplacian method is not able to distinguish vortices from the underlying shear layer clearly, while the Hessian matrix method does not suffer from this problem.

• 한국해양공학회지
• /
• 제11권2호
• /
• pp.18-27
• /
• 1997

Al 6061 alloy reinforced with 10 vol.% ${\delta}-Al_2O_3$ short fiber was fabricated by Rheo-compocasting and squwwze cating. Extrusion processings were performed at temperatures from 40$0^{\circ}C$ to 55$0^{\circ}C$ with various extrusion ratio for curved shape dies. In proportion to the increase of extrusion ratios and temperatures, ultimate tensile strength for extruded materials improved. SEM observation of fractured surfsce was capcble oof accounting for fracture mechanism and bounding state of fiber and matrix.

• 한국세라믹학회지
• /
• 제28권7호
• /
• pp.549-555
• /
• 1991

Mullite-zirconia (0∼4 mol% yttria) composites were obtained by In-situ sintering of zircon and alumina mixture, and their mechanical properties were studied in conjuction with microstructure observation. Martensitic transformation temperature (Ms) of zirconia dispersed in the mullite matrix decreased with Y2O3 contents and was about 600$^{\circ}C$ for ZrO2 containing 4 mol% Y2O3. On cooling of this composites, tetragonal to monoclinic phase transformation induced microcracks at the grain boundary of mullite matrix. The microcracks seemed to absorb the fracture energy in stress field during mechanical tests. Therefore, toughening mechanisms of this composite were considered to nucleation and extension of microcrack, and crack deflection mechanism due to the difference of thermal expansion coefficient between matrix and dispersed phase.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2013년도 추계학술대회
• /
• pp.130-132
• /
• 2013

This paper presents an improvement for calculating method of astronomical vessel position with circle of equal altitude equation based on using a virtual object in sun and two stars observation. In addition, to enhance the accuracy of ship position achieved from solving linear matrix system, and surmount the disadvantages on rank deficient matrices situation, the authors used singular value decomposition (SVD) in least square method instead of normal equation and QR decomposition, so, the solution of matrix system will be available in all situation. As proposal algorithm, astronomical ship position will give more accuracy than previous methods.

• 한국세라믹학회지
• /
• 제34권5호
• /
• pp.500-504
• /
• 1997

Perovskite Pb0.7Ba0.3Zn1/3Nb2/3O3 substituted with 0.3 mole fraction for Pb-site in PbZn1/3Nb2/3O3 relaxor and pyrochlore Pb1.83Ba0.29Zn1.71Nb2/3O6.39 were mixed and dielectric characteristics of this composites were investigated. Percolation limit of perovskite phase, which was determined by microstructural observation in the composite as an isolation of perovskite phase from pyrochlore matrix, was 28.9-47.5 vol%. Ferroelectric phase transition below percolation limit depends on a parameter which affects the propagation of lattice vibration between isolated perovskite phase and pyrochlore matrix. Therefore, it is believed that ferroelectric lattice vibration of isolated perovskite phase could be transfered to pyrochlore matrix when the oxygen octahedra are linked in 3-dimension and highly polarizable Pb2+ ions are contained in both phases.