• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.1
• /
• pp.13-18
• /
• 1999

The trap density by the stress bias in silicon oxides with different thicknesses has been investigated. The trap density by stress bias was shown to be composed of on time current and off time current. The on time trap density was composed of dc current. The off time trap density was caused by the tunneling charging and discharging of the trap in the interfaces. The on time trap density was used to estimate to the limitations on oxide thicknesses. The off time trap density was used to estimate the data retention in nonvolatile memory devices.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.3
• /
• pp.485-501
• /
• 1997

Pressure control is possible driving a simple ON/OFF 3-way valve of hydraulic servo system by pulse width modulation signal. But the pressure varies according to the duty ratio and carrier frequency and repeated on-off action induces pressure fluctuation. So equations for mean pressure and ripple amplitude are theoretically derived as a function of on/off time, the system parameters which decide the pressure characteristics are arranged and they are verified by experimental study. As the result selection criteria for the major design parameters are established and the basic strategy to suppress the unnecessary fluctuation can be provided for a hydraulic pressure control system using these type of valves.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.12
• /
• pp.3096-3117
• /
• 2013

To execute the performance driven Grid applications, an effective and scalable workflow scheduling is seen as an essential. To optimize cost & makespan, in this paper, we propose a Scalable Cost-Time Trade-off (SCTT) model for scheduling workflow tasks. We have developed a heuristic algorithm known as Scalable Cost-Time Trade-off Scheduling (SCTTS) with a lower runtime complexity based on the proposed SCTT model. We have compared the performance of our proposed approach with other heuristic and meta-heuristic based scheduling strategies using simulations. The results show that the proposed approach improves performance and scalability with different workflow sizes, task parallelism and heterogeneous resources. This method, therefore, outperforms other methods.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.1
• /
• pp.109-116
• /
• 1998

This paper is concerned with effective operating method of pneumatic on-off valves for improving position control accuracy, valve life-time and position settling time using modified pulse width modulation with dead-zone (MPWMD). The pneumatic system using on-off valves has advantage of simple construction and low cost compared with a system with servo-valves. The performance of the proposed control method is investigated experimentally for the position control of a pneumatic cylinder using on-off valves. Experimental results show that the proposed algorithm for valve operation can be used to obtain fast and accurate position control compared to the conventional PWMD algorithm. It is also shown that the use of the proposed MPWMD algorithm for the position control significantly reduces the number of valve switching and noise.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.6
• /
• pp.510-516
• /
• 2007

The proposed method offers an improved control method for high power density AC/DC adapter by using more energy efficient electrical equipments. Power factor correction (PFC) topology is based on boost topology with boundary conduction mode (BCM). DC/DC topology is based on half-bridge topology with fixed 50% duty and newly introduced off-time control method, which helps to reduce size of the semiconductor and the magnetic devices. Test results with 85W AC/DC adapter (18.5V/4.6A) design show that the measured efficiency is 90% with power density of $36W/in^3$. It also shows low no load power consumption of about 0.5W.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1999.11a
• /
• pp.76-79
• /
• 1999

This paper describes real power difference continuous and on/off operation of ballast for fluorescent lamps. We tested ballasts for fluorescent lamps, such that glow stater ballast, rapid stating ballast, and electronic ballast. We measured consumed real power. Input voltage is A.C. 220V and ON time 8 is minutes, OFF time 2 is minutes.

• Journal of Chest Surgery
• /
• v.37 no.7
• /
• pp.553-558
• /
• 2004

Avoiding cardiopulmonary bypass (CPB) in coronary artery bypass grafting (CAB G) has been known to reduce early mortality and morbidity. Diabetes Mellitus is a significant risk factor for adverse early and late outcomes after CABG. We compared the clinical results of off-pump CABG versus on-pump CABG in diabetes patients. Material and Method: 682 patients (424 off-pump CABG and 258 on-pump CABG) underwent isolated coronary artery bypass grafting between January 2001 and June 2003. Data were collected 242 patient who had diabetes. Among them, 154 patients underwent off-pump CABG and 90 patients underwent on-pump CABG. We analyzed the preoperative risk factors and postoperative results between 2 groups. Result: Two groups did not show statistical differences in age, sex, coronary and operative risk factors. Operative time was significantly shorter in off-pump CABG, however, number of grafts was fewer in off-pump CABG. Postoperative inotropic usage was lower in off-pump CABG. Postoperative CK-MB level was lower in off-pump CABG, and ICU stay and ventilation time was significantly shorter in off-pump CABG. However, there was no statistical difference between 2 groups in operative mortality, reoperation rate, perioperative myocardial infarction, wound infection, renal failure, neurological complications and hospital stay. Conclusion: Off-pump CABG group showed less myocardial damage and early recovery. We concluded that off-pump CABG is the more reasonable technique in diabetes patients although two techniques showed good results. The long-term follow up and prospective study may be warranted.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.4
• /
• pp.166-169
• /
• 2007

In applying LCD to TV application, one of the most significant factors to be improved is image sticking on the moving picture. LCD is different from CRT in the sense that it's continuous passive device, which holds images in entire frame period, while impulse type device generate image in very short time. To reduce image sticking problem related to hold type display mode, we made an experiment to drive TN-LCD like CRT. We made articulate images by turn on-off backlight, and we realized the ratio of Back Light on-off time by counting between on time and off time for video signal input during 1 frame (16.7 ms). Conventional CCFL (cold cathode fluorescent lamp) cannot follow fast on-off speed, so we evaluated new fluorescent substances of light source to improve residual light characteristic of CCFL. We realized articulate image generation similar to CRT by CCFL blinking drive and TN-LCD overdriving. As a result, reduced image sticking phenomenon was validated by naked eye and response time measurement.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.06a
• /
• pp.236-242
• /
• 2001

In this paper the effect of bump compliance, load, and the number of pad on the lift-off speed is studied. When the load is greater and bump compliance lower, the shaft is lifted off at higher rotating speed. And when the load is applied near the center of pad, lift-off speed is lower. When the number of pad increases, the lift-off speed is higher. The lift-off characteristics can be used to lengthen the life time of the coating and design the rotating machinery supported by bump bearings.

• Journal of Families and Better Life
• /
• v.14 no.3
• /
• pp.181-196
• /
• 1996

This study examined the time allocation pattern of farm wives. In particular it addressed i)the differences in extent of time spent in farming housework child care and leisure between on-farm and off-farm seasons ii)differences in the extent of time spent in such activities among farm wives and urban wives and iii) the determinants of time spent in such activities. To achieve these goals a system of time allocation equations based on household production theory was employed. On hundred and eight farm wives wiere selected in 1993 by the methods of judgement sampling and cluster sampling. Two major questions in the survey elicited sociodemographic information and time-use of farm wives using the time-diary method, The results indicate that farm wives different decisions about how to allocate their time to farming housework child care leisure during on-farm and off-farm seasons. In addition it was that farm wives are more likely to have dual responsibilities than are urban wives. Finally in the off-farm season education number of younger children and region were significant variables in explaining the time allocation decisions of farm wives. However only age was a significant factor in their time allocation decisions during the on-farm season. This leads one to conclude that time allocation is not a choice for farm wives in the on-farm season.