• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.7 s.94
• /
• pp.1678-1685
• /
• 1993

This paper considers a time delay control of noncolocated flexible mechanical systems in discrete time domain. A stability criterion suggested in the previous paper is,extended in the consideration of infinite mode property of flexible systems and finite control sampling frequency. Based on the stability criterion, the one step advanced discrete time derivative control is suggested, which can stabilize infinite number of modes of a flexible system. The sensitivity analysis shows the robustness of the one step advanced control to the system parameter uncertainties and time delay errors. Application to a simply supported beam verifies the extended stability criterion and the effectiveness of the one step advanced D-control.

• Journal of the Korean Society of Combustion
• /
• v.21 no.3
• /
• pp.24-31
• /
• 2016

In this paper we propose a new approach for an analysis and a prediction of combustion instability of lean premixed gas turbines. Our approach is based on the Nyquist stability criterion in control theory and a transfer function representation of a one-dimensional (1D) thermoacoustic system. A key advantage of the proposed approach is that one can systematically characterize the effects of various parameters of a combustor system on combustion instability. Our analysis method was applied to a real combustion system and the analysis results were consistent with experimental data.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.619-620
• /
• 2006

This paper presents a design of a 6-bit 2.704Gsamples/s D/A converter (DAC) for DS-CDMA UWB transceivers. The proposed DAC was designed with a current steering segmented 4+2 architecture for high frequency sampling rate. For low glitches, optimized deglitch circuit is adopted for the selection of current sources. The measured integral nonlinearity (INL) is -0.081 LSB and the measured differential nonlinearity (DNL) is -0.065 LSB. The DAC implemented in a 0.13um CMOS technology shows s spurious free dynamic range (SFDR) of 50dB from dc to Nyquist frequency. The prototype DAC consumes 28mW for a Nyquist sinusoidal output signal at a 2.704Gsamples/s. The chip has an active area of $0.76mm^2$.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.11
• /
• pp.67-72
• /
• 2011

In this paper, we investigate the energy detector to detect a primary user. And employ the compressed sensing method to get the lower sampling rate than Nyquist sampling rate. In more wide bandwidth we using the small samples than Nyquist sampling rate samples to recover original signal. we investigate the performance of energy detector with compressive sensing method under suzuki channel. The performance is investigated by simulation and compared to that of conventional energy detector.

• 유공압시스템학회:학술대회논문집
• /
• 2010.06a
• /
• pp.12-17
• /
• 2010

The poppet valve had used every field area due to high quality of leakage property and response characteristic. But this valve still has terrible disadvantage that is self-exited vibration. This problem affects stability of total system and raises noise. The researcher tries to reduce that self-exited vibration when valve was designed. The stability discriminant is the typical study to improve the performance of the poppet valve. This paper concerns about stability discriminant that uses poppet valve with a drain orifice. At the first, the mathematical model is computed from poppet valve. After that, the limitation of stability is calculated that based on Nyquist criterion. At the final, the stability discriminant is selected in each condition and the graph that shows stability in the system is drown by dimensionless quantity.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2648-2650
• /
• 2000

The PID tuning algorithm which can be applied generally to processes with varies dynamic characteristics is proposed by Wang[7]. However, it can be applied well to process model without zeros and with $\angle$G(jw)=-${\pi}$/2 and -${\pi}$ point in Nyquist curve, but it gives unsatisfactory tuning performance for processes with zeros and without $\angle$G(jW)=-${\pi}$/2 and -${\pi}$ in Nyquist curve. In this paper, the method which improve it using Pade reduction method is proposed. Satisfactory responses can be expected for processes with various dynamics, including those with low or high order, small or large dead time, monotonic or oscillatory responses. Simulation examples are given to show the effectiveness and flexibility of the controller in handling processes of different characteristics.

• ETRI Journal
• /
• v.36 no.6
• /
• pp.894-904
• /
• 2014

Blind mismatch correction of time-interleaved analog-to-digital converters (TI-ADC) is a challenging task. We present a practical blind calibration technique for low-computation, low-complexity, and high-resolution applications. Its key features are: dramatically reduced computation; simple hardware; guaranteed parameter convergence with an arbitrary number of TI-ADC channels and most real-life input signals, with no bandwidth limitation; multiple Nyquist zone operation; and mixed-domain error correction. The proposed technique is experimentally verified by an M = 4 400 MSPS TI-ADC system. In a single-tone test, the proposed practical blind calibration technique suppressed mismatch spurs by 70 dB to 90 dB below the signal tone across the first two Nyquist zones (10 MHz to 390 MHz). A wideband signal test also confirms the proposed technique.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.664-669
• /
• 2001

Continuous-time controller design is proposed using feedback system identification in frequency domain. System stability imposed by a new controller is checked in the function of a conventional closed-loop system, instead of a poorly modeled plant due to non-linearity and disturbance as well as unstable components, etc. The stability of the system is evaluated in view of Nyquist stability. All the equations are formulated in the framework of the discrete-time system. Simulation results are shown on the plant with input saturation and DC disturbance.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.175-182
• /
• 1997

To design a high resolution three-mirror telescope for visible spectral region, initial design technique based on the generation of flat field anastigmatic solutions limited by mechanical structure was proposed. An initial design of the three-mirror telescope that features relatively high focal ratio(F/14.5), large aperture diameter(600 mm), and squared field of view(0.27$^{\circ}$$\times$1.3$^{\circ}$) was done using an initial design program. Code V was used to optimized the initially designed optical system. As a result, MTF value of the telescope was about 0.5 at Nyquist frequency in each field except for the edge of the CCD.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.10
• /
• pp.1074-1080
• /
• 1992

A(5,8) block binary line code is proposed. The new line code called MB58 has the properties of being dc-free and runlength-limited, and it is strictly bandwidth-limited to the Nyquist frequency, such that bandwidth efficiency is improved. This new code is a memoryless code with a simple decoding rule and capability of error monitoring. The power spectrum and the eye pattern of the new code are obtained by simulation, wherein spectral nulls at DC(f=0) and Nyquist frequency (f=1/2Ts) are clearly identified.