• Journal of the Korean Wood Science and Technology
• /
• 제35권3호
• /
• pp.1-9
• /
• 2007

다중 볼트 접합부에서는, 해석적인 방법으로는 볼트의 개수가 두 개까지 만으로 제한되고 다양한 여러 형태의 접합부 거동 해석이 불가능하다. 이를 해결하기 위하여 볼트의 개수에 구애받지 않고 거동을 예측할 수 있으며 또한 다양한 형태의 여러 접합부의 거동을 해석할 수 있게 하기 위하여 수치해석적 방법을 개발하고자 하였다. 수치해석법을 이용하여 거동 해석을 실시하기 위한 최적 변수로는 r=0.35, Kx=137.5, Ky=257.4가 각각 얻어졌다. 기존의 이론적 방법에 비하여 본 연구에서 개발한 수치해석 모델의 거동 해석 정확도가 더 높음을 알 수 있었다.

• Structural Engineering and Mechanics
• /
• 제49권5호
• /
• pp.555-568
• /
• 2014

In this article, stability of composite conical shells subjected to dynamic external pressure is investigated by numerical and experimental methods. In experimental tests, cross-ply glass woven fabrics were selected for manufacturing of specimens. Hand-layup method was employed for fabricating the glass-epoxy composite shells. A test-setup that includes pressure vessel and data acquisition system was designed. Also, numerical analyses are performed. In these analyses, effect of actual geometrical imperfections of experimental specimens on the numerical results is investigated. For introducing the imperfections to the numerical models, linear eigen-value buckling analyses were employed. The buckling modes are multiplied by very small numbers that are derived from measurement of actual specimens. Finally, results are compared together while a good agreement between results of imperfect numerical analyses and experimental tests is observed.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.5-9
• /
• 2010

A numerical wind tunnel simulation is performed in order to predict wind loads acting on a building. The aim of the present study is to suggest a guideline for the numerical wind tunnel analysis, which could provide more detail wind load distributions compared to the wind code and expensive wind tunnel experiments. To validate the present numerical simulation, wind-induced loads on a 6 m cube model is predicted. Atmospheric boundary layer is used as a inlet boundary condition. Various effect of numerical methods are investigated such as size of computational domain, grid density, turbulence model and discretization scheme. The appropriate procedure for the numerical wind tunnel analysis is suggested through the present study.

• Journal of applied mathematics & informatics
• /
• 제26권1_2호
• /
• pp.135-149
• /
• 2008

Many deterministic systems are described by Ordinary differential equations and can often be improved by including stochastic effects, but numerical methods for solving stochastic differential equations(SDEs) are required, and work in this area is far less advanced than for deterministic differential equations. In this paper,first we follow [7] to describe Runge-Kutta methods with order 2 from Taylor approximations in the weak sense and present two well known Runge-Kutta methods, RK2-TO and RK2-PL. Then we obtain a new 3-stage explicit Runge-Kutta with order 2 in weak sense and compare the numerical results among these three methods.

• Coupled systems mechanics
• /
• 제1권4호
• /
• pp.325-343
• /
• 2012

We present different numerical methods for solving the shallow shelf equations with basal drag (SSAB). An alternative approach of splitting the SSAB equation into a Laplacian and diagonal shift operator is discussed with respect to the underlying eigenvalue problem. First, we solve the equations using standard methods. Then, the coupled equations are decomposed into operators for membranes stresses, basal shear stress and driving stress. Applying reasonable parameter values, we demonstrate that the operator of the membrane stresses is much stiffer than the operator of the basal shear stress. Here, we could apply a new splitting method, which alternates between the iteration on the membrane-stress operator and the basal-shear operator, with a more frequent iteration on the operator of the membrane stresses. We show that this splitting accelerates and stabilize the computational performance of the numerical method, although an appropriate choice of the standard method used to solve for all operators in one step speeds up the scheme as well.

• Journal of applied mathematics & informatics
• /
• 제33권1_2호
• /
• pp.61-76
• /
• 2015

In this paper, a fifth order extension of Potra's third order iterative method is proposed for solving nonlinear equations. A convergence theorem along with the error bounds is established. The method takes three functions and one derivative evaluations giving its efficiency index equals to 1.495. Some numerical examples are also solved and the results obtained are compared with some other existing fifth order methods. Next, the interval extension of both third and fifth order Potra's method are developed by using the concepts of interval analysis. Convergence analysis of these methods are discussed to establish their third and fifth orders respectively. A number of numerical examples are worked out using INTLAB in order to demonstrate the efficacy of the methods. The results of the proposed methods are compared with the results of the interval Newton method.

• 산업기술연구
• /
• 제21권A호
• /
• pp.7-14
• /
• 2001

In building structure, the story height can be minimized by providing openings in beams which serves for the utility equipments passing through. The dead space in false ceiling thus put to economical use in the form of a substantial reduction in materials and construction cost. In the case of steel structure, there is no critical risk in the structural strength because of reinforcing methods of stiffness and steel plate but in the case of reinforced concrete structure, proper provision should be made in designing these openings, otherwise there is a risk that these opening will possibly weaken the structural strength of the building frame to a critical degree. In this paper, for the numerical analysis of the reinforced concrete beams with circular opening in the web, expecting stress concentration of the circular opening, reinforcing methods were studied. Twenty test pieces with each different reinforcing methods were tested and their resisting forces were defined. From the numerical analysis and test results, the followings were founded;(1)high shear stress distributed around the openings reduce the shearing strength, (2)from the numerical analysis, the maximum tensile stress occurred at opening nodes 1,7, these phenomena were agreed with the test results, (3)reinforcing method around openings have to carried out for stopping diagonal cracks, and (4)both, by steel plate, and wire mesh, are effective reinforcing methods.

• International Journal of Ocean System Engineering
• /
• 제1권3호
• /
• pp.136-143
• /
• 2011

In this paper, three-dimensional free-surface flows are simulated by using two different numerical methods, the constrained interpolation profile (CIP)-based and finite volume (FV)-based methods. In the CIP-based method, the governing equations are solved on stationary staggered Cartesian grids by a finite difference method, and an immersed boundary technique is applied to deal with wave-body interactions. In the FV-based method, the governing equations are solved by applying collocated finite volume discretization, and body-fitted meshes are used. A free-surface boundary is considered as the interface of the multi-phase flow with air and water, and a volumeof-fluid (VOF) approach is applied to trace the free surface. Among many variations of the VOF-type method, the tangent of hyperbola for interface capturing (THINC) and the compressive interface capturing scheme for arbitrary meshes (CICSAM) techniques are used in the CIP-based method and FV-based method, respectively. Numerical simulations have been carried out for dam-breaking and wave-body interaction problems. The computational results of the two methods are compared with experimental data and their differences are observed.

• 지질공학
• /
• 제33권3호
• /
• pp.439-459
• /
• 2023

Numerical analysis has been adopted in nearly all modern scientific and engineering fields due to the rapid and ongoing evolution of computational technology, with the number of grid or mesh points in a given data field also increasing. Some values must be extracted from large data fields to evaluate and supplement numerical analysis results and observational data, thereby highlighting the need for a fast and effective interpolation approach. The quadrilateral irregular network (QIN) proposed in this study is a fast and reliable interpolation method that is capable of sufficiently satisfying these demands. A comparative sensitivity analysis is first performed using known test functions to assess the accuracy and computational requirements of QIN relative to conventional interpolation methods. These same interpolation methods are then employed to produce simple numerical model results for a real-world comparison. Unlike conventional interpolation methods, QIN can obtain reliable results with a guaranteed degree of accuracy since there is no need to determine the optimal parameter values. Furthermore, QIN is a computationally efficient method compared with conventional interpolation methods that require the entire data space to be evaluated during interpolation, even if only a subset of the data space requires interpolation.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2000
• /
• pp.108-115
• /
• 2000

Numerical analysis of slop stability is presented using seismic displacement, response seismic coefficient, and earthquake response analysis methods. In seismic displacement and response seismic coefficient methods, horizontal static seismic force is considered as 0.2g while vertical static seismic force is not considered in analysis. For earthquake response analysis Hahinoha-wave is applied, It is found from result that analysis using response seismic coefficient method is much more conservative than that using seismic displacement method Also, analysis result using earthquake response analysis method is somewhat less conservative about 25% when compared with that using seismic displacement method.