• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.907-914
• /
• 2011

It has used for Rolling Stock Maintenance a number of maintenance system applied RCM in Railway(Korea Railroad Corporation, Seoul Metro, Korail Airport Railroad Corporation, etc) so far. Some institutions has been using develop Computational System including reliability process. A majority of the system has computerized maintenance work, but it is shown that developed focus on administrator and developer not user. SMRT(Seoul Metropolitan Rapid Transit Corporation) has developed computational system for maintenance in the '90s and saved many data about Maintenance Historical Data. However, this system reached the limits application of this data. Maintenance of computer systems is managed directly by the field staff and to introduce Reliability-centered maintenance SMRT was continually reviewed system development trends and supplement the existing system. To successfully operate RCM program should be gained full support in the whole company and field communicate, secure a reliable data from field and the most important take a patience. Our corporation will operate and develop successful RCM thorough review of these problems in the future.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.475-480
• /
• 2010

The safety step has been developed to ensure the passengers' safety including the disabled and the weak by eliminating gap between vehicle and platform. The type of safety step is divided according to the position that the safety step is installed. The type of safety step attached platform is the rubber type that is previously attached to a platform. The installed rubber can reduces the gap between vehicle and platform by a fixed distance. If the safety step is installed on the vehicle, it is possible to respond to the various platform typed such as straight or curved form. It is also flexible to the height of riding depends on number of passenger and platform conditions and does not require crew's additional operation. We have been developed vehicle attached safety step for advanced electric multiple unit. We hope to increase the use of safety step for the disabled and the weak to expand the convenience use of railway transportation system.

• Journal of the Korean Society for Railway
• /
• v.16 no.6
• /
• pp.503-509
• /
• 2013

Since the opening of KTX, the number of people coming to KTX stations to use KTX has steadily increased. Passengers have a variety of access modes between a KTX station and their origin/destination. But there is no way to confirm the level of connection strength. So this study examines various connection characteristic variables that can show the connectivity, and examines influencing relationships, and chooses variables that affect connectivity by using a KTX modal split. We will suggest connectivity estimation models between a KTX station and origin/destination based on the selected connected variables.

• Journal of the Korean Society for Railway
• /
• v.13 no.3
• /
• pp.333-338
• /
• 2010

Investment in railroad, it is very important to find a way to increase a benefit to make the economic efficiency more positive, but is also considering that the cost will be higher. In this paper, we suggest a optimized model for increasing the benefit of railroad business considering of stopping patterns. According to existing analytical method, the operation hour is calculated based on that scenario regarding that it stops at all major stations but it does not fit the actual operation conditions. Considering various stopping patterns can be reasonably calculated the cost for required rail cars in the planning stages, and can also affect economic efficiency in a positive way.

• Journal of the Korean Society for Railway
• /
• v.14 no.6
• /
• pp.489-494
• /
• 2011

In this paper, a method is proposed to evaluate a number of alternatives for light-weight rolling stock recommended from experts in rolling stock and to decide an optimal alternative. At first, many customer needs from various fields in railroad are drawn and weights of customer needs are decided by AHP. Secondly, technical requirements that should be real specifications for light-weight rolling stock are set and weights of technical requirements are decided by QFD. Finally, we evaluate some proposed alternatives and conclude an optimal alternative of light-weight rolling stock with TOPSIS.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.163-167
• /
• 2008

In this study, the 1/35 reduced-scale model experiment were conducted to investigate designed ventilation effect on the smoke movement at rescue station fire in railway tunnel. A model tunnel with 2 mm thick, 10 m long, 0.19 m high and 0.26 m was made by using Froude number scaling law. The cross-passages installing escape door at the center were connected between incident tunnel and rescue tunnel. The n-heptane pool fires with heat release rate 698.97W were used as fire source. The fire source was located at the center and portal of incident tunnel as worst case. A operating ventilation system extracted smoke amount of 0.015 cms(cubic meters per second). The smoke temperature and CO gas concentration in cross-passage were measured to verify designed ventilation system. The result showed that, at center fire case without ventilation, smoke did not propagate to rescues station. In portal fire case, smoke spreaded to rescues station without ventilation. But smoke did not propagated to rescues station with designed ventilation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8700-8706
• /
• 2015

The first driving device of the power bogies for the Korean high-speed railway vehicle consists of the traction motor (TM) and the motor reduction gears unit (MRU). Although TM and MRU are the mechanically integrated structures, their time between overhauls (TBO) have two separate intervals due to different technical requirements(i.e. TBO of MRU: $1.8{\times}10^6km$, TBO of TM: $2.5{\times}10^6km$). Therefore, to reduce the unnecessary number of preventive maintenances, it is important to evaluate the optimal TBO with a viewpoint of reliability-center maintenance towards cost-effective solution. In this study, derived from the field data in maintenance, fault tree analysis and failure rate of the subsystem considering criticality of the components are evaluated respectively. To minimize the conventional total maintenance cost, the same optimal TBO of the components is derived from genetic algorithm considering target reliability and improvement factor. In this algorithm, a chromosome which comprised of each individual is the minimum preventive maintenance interval. The fitness function of the individual in generation is acquired through the formulation using an inverse number of the total maintenance cost. Whereas the lowest common multiple method produces only a four percent reduction compared to what the existing method did, the optimal TBO of them using genetic algorithm is $2.25{\times}10^6$km, which is reduced to about 14% comparing the conventional method.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.1
• /
• pp.27-35
• /
• 2021

The study intends to identify the effects of infrastructure property on an apartment house by analyzing the price variation affected by factors constituting the quality of the transit services of each individual station in urban railway system based on hedonic price model. The research findings indicate that the prices depending on the transit users have increased from 7.8% to 12.2% in Seoul and decreased from 6.1% to 12.9% in Gyeonggi, which implies that a lower number of transfer users has a positive effect on housing prices in Seoul unlike Gyeonggi. It also is noteworthy that the distance to the urban railway station had a negative effect on housing prices in Seoul and positive effect in Gyeonggi. Taking these results together, in Seoul, the increase in the number of transit users had a negative effect on neighborhood housing prices. When analyzed by segments, however, an additional negative effect was observed only in the apartments located within the radius of 100 meters. It is also found that the impact of transit users varies according to the regional characteristics, such as the density of commercial facilities and the population density, and the spatial extent of negative effect also showed regional differences. These results provide implications for the planning of new stations, new cities, and land use of existing areas around stations.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3306-3311
• /
• 2011

Last Subway video surveillance system consists of a network device that is used. Through the network to transmit video data to digital conversion of analog video via a process server or a PC video to a split-screen in various forms is expressed. In recent years, multi-monitor video cameras from the same pop-up or more, such as history, structure expressed on a variety of video is required by express. The problem with these systems, video compression and transmission of many cameras, and this image data received from the server or PC to take out all the images you want to watch to occur when in order to express all of the images because of the need to decode most of the program per limit of number of channels is positioned. This limited number of channels to have a video that nothing forced, but it is likely to do so in the future performance of the hardware evolves gradually channeled images available number of channels will increase proportionately. However, as the development of hardware required for a single screen video channel will be more gradual capital. The hardware rather than relying solely on the performance of the decoded video data on the screen in order to express a more efficient utilization of shared memory for video surveillance software will provide the operating plan.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.877-886
• /
• 2019

The size of the subway entrance should be calculated according to the user's demand, but Korea has the same size for each entrance by applying a uniform value. Recently, the installation of mobile convenience facilities such as escalators, elevators, etc. is mandated by the traffic weakness promotion law, but it is inconvenient to use the existing stations because it is mainly arranged in the place where it can be installed regardless of user demand. This study aims to establish a model for estimating the size of mobile convenience facilities by predicting the use demand of each station entrance so that the location and size of mobile facilities can be reflected in the design or construction of the station. To this end, a multiple regression model was established to forecast daily demand by utilizing the demand for getting on and off by station and the building association area for each purpose around the railway station. The actual data of Dongdaemun and Jonggak Stations were used to verify the estimated model. In addition, the escalator installation scale was compared / analyzed by doorway using domestic and overseas escalator equations. As a result, it was more accurate to estimate the usage demand for a single station. Also, Jonggak Station has an up and down escalator installed at exit 1, but it was analyzed that it is appropriate to install at exit 4. This study is an advanced form of the essay model for estimating the users of the entrance and exit users of urban railway stations published in 2018. In addition, it seems to be the basis of the current escalator installation criteria.