• 한국압력기기공학회 논문집
• /
• 제13권2호
• /
• pp.1-18
• /
• 2017

세계적으로 원자력발전소의 안정적 운영 및 안전성 확보를 위해 수명기간 중 주요 기기 및 배관의 실제 운전 과도상태를 체계적으로 관리하고, 피로 손상의 정량적 평가 및 관리를 위한 체계적인 시스템이 요구되고 있는 실정이다. 이에 본 논문에서는 원자력발전소의 안전등급 1 설비에 대한 피로 평가요건을 분석하였고, 피로 감시방법 및 절차와 웹 기반으로 개발된 피로 감시 시스템인 NuFMS 개발 및 검증 내용을 기술하였다. NuFMS는 설계 시 고려한 과도상태 발생 횟수 대 비발전소의 특정 운전 시점에서의 실제 발생 횟수를 비교하여 안전 여유도의 정량적 확인이 가능하며, 누적피로사용계수 도출을 통해 정확한 피로영향 분석뿐만 아니라 손상 관리가 가능하다. 이와 같이 NuFMS의 적용을 통해 원자력발전소 기기 및 배관의 피로 건전성을 확인하고 운영 신뢰도를 향상시킬 수 있으며, 발전소의 안전성 유지 및 운영비용 절감 등의 효과를 기대할 수 있다. 따라서 향후 국내 전 원전에 NuFMS를 확대 적용할 예정이며, 이러한 기술의 해외 수출을 적극 추진 중이다.

• 환경생물
• /
• 제17권3호
• /
• pp.315-319
• /
• 1999

갈파래의 포자가 부착한 Agar와 Agarose코팅필름은 agar, agarose 또는 메탄놀의 농도에 따라 다양한 표면의 성질을 나타냈다. Sigma agarose 코팅필름에서 가장 많은 수의 포자 부착이 일어났다. Bacto agar과 그외 agarose으로 코팅한 필름에 부착한 포자는 Sigma agarose으로 코팅한 필름보다 12∼36배나 적었다. 2.5%와 5％ 의 SeaKem agarose와 Bacto agar 코팅필름의 비교에서 두 개의 농도 차이가 있는 반면에, 2.5%와 5%의 NuSieve와 Sigma agarose 코팅필름의 비교에서는 차이가 없었다. 5％ 의 Bacto agar와 4％ 의 메탄놀을 포함한 5% Bacto agar 비교, 5％ NuSieve와 4％ 메탄놀을 포함한 5% NuSieve agarose비교에서만 차이를 보였다. 본 연구의 전반적인 결과는 agar와 agarose로 코팅한 필름에서 포자 부착의 차이가 있음을 알 수 있었다. 본연구 결과는 착생생물에 대한 반착생을 검색할 수 있는 기초가 되어질 것이다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(1)
• /
• pp.484-488
• /
• 1997

Fission product release (FPR) assessment for 100% reactor outlet header (ROH) break in CANDU reactor loaded with CANFLEX-NU fuel bundles has been performed. The predicted results are compared with those for the reactor loaded with standard 37-element bundles. The fuel failure thresholds for the CANFLEX and standard bundle elements are very similar. All the sheaths at the corresponding fuel failure thresholds for the CANFLEX and standard bundles fail due to the significant cracks in the surface oxide, except those for the CANFLEX inner element at burnups of 220 to 240 MW.h/kg(U), which fail due to the excessive diametral strain. The fuel failure analysis predicts that the number of failed fuel elements for the CANFLEX bundle case is none, while that for the standard bundle case is 1827. The total (gap plus bound) I-131 releases for the CANFLEX and standard bundles are none and 5889 TBq, respectively The significant reduction of the number of failed fuel elements and FPR for the CABFKEX fuel bundle is attributed to the lower linear power of the CANFLEX fuel bundle compared with the standard fuel bundle.

• 대한설비공학회지:설비저널
• /
• 제17권6호
• /
• pp.708-716
• /
• 1988

Local heat transfer coefficients were measured on semi-cylinders on which a circular water jet impinged in crossflow. The ratio of the semi-cylinder's diameter and the nozzle outlet diameter were varied parametrically, as were the Reynolds number and the supplementary water heights. The measurements showed that the circumferential distribution of the heat transfer coefficient peaked at the stagnation point. For a fixed supplementary water height, the peak heat transfer coefficient was not depend on the curvature of test specimen(d/D). Optimum height of supplementary water which brought about the augmentation of heat transfer at the stagnation point was S/D=1. The Nusselt number decreased as the circumferential distance or angle increased. The circumferential distribution of dimensionless heat transfer (Nu/Nus) was independent of d/D ($d/D{\geq}8.33$), but for the d/D<8.33, it was depended on d/D. At a fixed angle of specimen, dimensionless heat transfer (Nu/Nus) decreased as the ratio d/D increased. The extent of the decrease between d/D=6.67 and 8.33 was markedly greater than that between d/D=8.33 and 10, or d/D=10 and 11.67.

• Bulletin of the Korean Chemical Society
• /
• 제33권3호
• /
• pp.809-817
• /
• 2012

The resonance structure of the preionization spectrum of $H_2$ in the region immediately above its ionization threshold, ($^2{\sum}_{g}^{+}$, $\nu^+=0$, $N^+=0$) converging toward its rotationally excited ($\nu^+=0$, $N^+=2$) limit, is complicated due to perturbation by the vibrationally excited levels $7_{p\pi}\;v=1$ and $57_{p\pi}\;v=2$. The spectra of interlopers are separated from the rotationally preionizing Rydberg series to allow analysis of this complex resonance structure. Although only two vibrationally excited levels perturb the rotational preionization spectrum, at least 6 interloper Rydberg series participate in the complex spectrum over most of its energy range and more interloper series participate at a narrow range around $124500cm^{-1}$ in the spectrum. To allow handling of an arbitrary number of interloper series, MATLAB$^{(R)}$'s symbolic operation is used to perform on-the-fly formulation.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.409-416
• /
• 2003

We consider the problem of grouping orders into lots. The problem is modelled by a graph G = (V, E). where each node $\nu\;\in\;V$ denotes order specification and its weight $\omega(\nu)$ the orders on hand for the specification. We ran construct a lot simply from orders or single specification For a set of nodes (specifications) $\theta\;\subseteq\;V$, if the distance or any two nodes in $\theta$ is at most d, it is also possible to make a lot using orders on the nodes. The objective is to maximize the number of lots with size exactly $\lambda$. In this paper, we prove that our problem is NP-Complete when d = 2, $\lambda\;=\;3$ and each weight is 0 or 1. Moreover, it is also shown to be NP-Complete when d = 1, $\lambda\;=\;3$ and each weight is 1, 2 or 3

• 설비공학논문집
• /
• 제8권1호
• /
• pp.13-25
• /
• 1996

The purpose of this paper is to study heat transfer characteristics of rotating heat pipe with tapered condensers by numerical analysis and experimental method. An experimental investigation has been carried out on thermal resistance between condenser wall and vapor region fo the rotating heat pipe with various taper 0, 1/11.4, 1/38. Heat transfer characteristics by analytical study were applied to describe various Nu numbers on the base of dimensionless condensate film, Re and Pr numbers in both condensers. Comparison between calculated results and experimental data showed qualitatively good agreement and the numerical analysis of this study can be utilized to predict the performance of a rotating heat pipe. The thermal resistance can be decreased by increasing the revolution per minute. Regardless of various dimensionless condensate film, Nu number was largely influenced by saturation temperatures of working fluid.

• 대한산업공학회지
• /
• 제29권4호
• /
• pp.253-258
• /
• 2003

We consider the problem of grouping orders into lots. The problem is modelled by a graph G=(V,E), where each node ${\nu}{\in}V$ denotes order specification and its weight ${\omega}(\nu)$ the orders on hand for the specification. We can construct a lot simply from orders of single specification. For a set of nodes (specifications) ${\theta}{\subseteq}V$, if the distance of any two nodes in $\theta$ is at most d, it is also possible to make a lot using orders on the nodes. The objective is to maximize the number of lots with size exactly $\lambda$. In this paper, we prove that our problem is NP-Complete when $d=2,{\lambda}=3$ and each weight is 0 or 1. Moreover, it is also shown to be NP-Complete when $d=1,{\lambda}=3$ and each weight is 1,2 or 3.

• 대한설비공학회지:설비저널
• /
• 제17권4호
• /
• pp.328-335
• /
• 1988

Natural convection in annuli between the horizontal and vertical concentric cylinders for ratio of the inner to the outer radius, $R_1$=0.85, 0.35 has been studied by the numerical analysis. Governing equations are numerically sloved by means of Successive over-relaxation methods. It is found that maximum local Nusselt number, $Nu_{1.max}$ at the inner cylinder and $Nu_{2.max}$ at the outer cylinder for $R_2$=0.35 have maxima at ${\phi}=0^{\circ}$, ${\phi}=180^{\circ}$ ${\xi}=0.4$, 1.6 for horizontal cylinder and at bottom, top for vertical cylinder, respectively. In the present study, mean Nusselt numbers at the vertical cylinder increased more than that at the horizontal cylinder by about 64% for $R_1$=0.35.

• 대한기계학회논문집B
• /
• 제37권12호
• /
• pp.1113-1120
• /
• 2013

본 연구에서는 $45^{\circ}$기울어진 저온의 사각형 밀폐계 내부에 존재하는 고온의 원형 실린더의 위치 변화에 따른 밀폐계 내부 자연대류 현상에 대한 수치해석을 수행하였다. Rayleigh 수는 $10^3$부터 $10^5$까지 변화하였으며 내부 실린더의 위치는 $-0.4{\leq}{\delta}{\leq}0.4$ 범위에서 0.1 간격으로 변화시켰다. 원형 실린더의 위치 변화에 따른 밀폐계 내부의 자연대류 현상은 실린더 표면과 밀폐계 표면의 Nu 수, 밀폐계 내부의 등온선 및 유선을 바탕으로 분석하였다. 본 연구에서 고려한 Rayleigh 수의 범위와 원형 실린더의 위치 범위에서는 밀폐계 내부의 열유동은 정상상태의 특성을 보였다. 그리고 내부 원형 실린더가 벽면에 가까워 질수록 실린더벽면과 밀폐계 벽면의 평균 Nu 수가 증가하였다.