• Title/Summary/Keyword: Ns-2

Search Result 1,725, Processing Time 0.028 seconds

Branched DNA-based Synthesis of Fluorescent Silver Nanocluster

  • Park, Juwon;Song, Jaejung;Park, Joonhyuck;Park, Nokyoung;Kim, Sungjee
    • Bulletin of the Korean Chemical Society
    • /
    • v.35 no.4
    • /
    • pp.1105-1109
    • /
    • 2014
  • While single strand DNAs have been widely used for the scaffold of brightly fluorescent silver nanoclusters (Ag NCs), double strand DNAs have not been as successful. Herein, we report a novel synthetic approach for bright Ag NCs using branched double strand DNAs as the scaffolds for synthesis. X-shaped DNA (X-DNA) and Y-shaped DNA (Y-DNA) effectively stabilized Ag NCs, and both X-DNA and Y-DNA resulted in brightly fluorescent Ag NCs. The concentration and molar ratio of silver and DNA were found important for the fluorescence efficiency. The brightest Ag NC with the photoluminescence quantum efficiency of 19.8% was obtained for the reaction condition of 10 ${\mu}M$ X-DNA, 70 ${\mu}M$ silver, and the reaction time of 48 h. The fluorescence lifetime was about 2 ns for the Ag NCs and was also slightly dependent on the synthetic condition. Addition of Cu ions at the Ag NC preparations resulted in the quenching of Ag NC fluorescence, which was different to the brightening cases of single strand DNA stabilized Ag NCs.

A Hybrid Audio ${\Delta}{\Sigma}$ Modulator with dB-Linear Gain Control Function

  • Kim, Yi-Gyeong;Cho, Min-Hyung;Kim, Bong-Chan;Kwon, Jong-Kee
    • ETRI Journal
    • /
    • v.33 no.6
    • /
    • pp.897-903
    • /
    • 2011
  • A hybrid ${\Delta}{\Sigma}$ modulator for audio applications is presented in this paper. The pulse generator for digital-to-analog converter alleviates the requirement of the external clock jitter and calibrates the coefficient variation due to a process shift and temperature changes. The input resistor network in the first integrator offers a gain control function in a dB-linear fashion. Also, careful chopper stabilization implementation using return-to-zero scheme in the first continuous-time integrator minimizes both the influence of flicker noise and inflow noise due to chopping. The chip is implemented in a 0.13 ${\mu}m$ CMOS technology (I/O devices) and occupies an active area of 0.37 $mm^2$. The ${\Delta}{\Sigma}$ modulator achieves a dynamic range (A-weighted) of 97.8 dB and a peak signal-to-noise-plus-distortion ratio of 90.0 dB over an audio bandwidth of 20 kHz with a 4.4 mW power consumption from 3.3 V. Also, the gain of the modulator is controlled from -9.5 dB to 8.5 dB, and the performance of the modulator is maintained up to 5 nsRMS external clock jitter.

Feasibility study of multiplexing method using digital signal encoding technique

  • Kim, Kyu Bom;Leem, Hyun Tae;Chung, Yong Hyun;Shin, Han-Back
    • Nuclear Engineering and Technology
    • /
    • v.52 no.10
    • /
    • pp.2339-2345
    • /
    • 2020
  • Radiation imaging systems consisting of a large number of channels greatly benefit from multiplexing methods to reduce the number of channels with minimizing the system complexity and development cost. In conventional pixelated radiation detector modules, such as anger logic, is used to reduce a large number of channels that transmit signals to a data acquisition system. However, these methods have limitations of electrical noise and distortion at the detector edge. To solve these problems, a multiplexing concept using a digital signal encoding technique based on a time delay method for signals from detectors was developed in this study. The digital encoding multiplexing (DEM) method was developed based on the time-over-threshold (ToT) method to provide more information including the activation time, position, and energy in one-bit line. This is the major advantage of the DEM method as compared with the traditional ToT method providing only energy information. The energy was measured and calibrated by the ToT method. The energy resolution and coincidence time resolution were observed as 16% and 2.4 ns, respectively, with DEM. The position was successfully distributed on each channel. This study demonstrated the feasibility that DEM was useful to reduce the number of detector channels.

Design of Ultra-wide Band-pass Filter Based on Metamaterials Applicable to Microwave Photonics

  • Lee, Chongmin;Shim, Wooseok;Moon, Yong;Seo, Chulhun
    • Journal of the Optical Society of Korea
    • /
    • v.16 no.3
    • /
    • pp.288-291
    • /
    • 2012
  • We designed an ultra-wide band-pass filter applicable to microwave reflectometry for KSTAR (Korea Superconducting Tokamak Advanced Research) and to microwave photonics. The proposed ultra-wide band-pass filter exhibits a metamaterial structure characterized by a wide band, low insertion loss, and high skirt selectivity. The proposed filter is applied to enhance the linearity of reflectometry at the output of a VCO (voltage controlled oscillator). The pass-band of the proposed filter is observed at 18~28 GHz, and the out-of-band rejection is below 20 dB. Further, we constructed an unwrapped negative phase of S(2, 1) to verify the characteristics of the metamaterial. The under- and upper-band at lower limits of the pass-band are left- and right-handed, respectively. The group delay of the filter is less than 0.5 ns.

Enhanced OLSR Routing Protocol Using Link-Break Prediction Mechanism for WSN

  • Jaggi, Sukhleen;Wasson, Er. Vikas
    • Industrial Engineering and Management Systems
    • /
    • v.15 no.3
    • /
    • pp.259-267
    • /
    • 2016
  • In Wireless Sensor Network, various routing protocols were employed by our Research and Development community to improve the energy efficiency of a network as well as to control the traffic by considering the terms, i.e. Packet delivery rate, the average end-to-end delay, network routing load, average throughput, and total energy consumption. While maintaining network connectivity for a long-term duration, it's necessary that routing protocol must perform in an efficient way. As we discussed Optimized Link State Routing protocol between all of them, we find out that this protocol performs well in the large and dense networks, but with the decrease in network size then scalability of the network decreases. Whenever a link breakage is encountered, OLSR is not able to periodically update its routing table which may create a redundancy problem. To resolve this issue in the OLSR problem of redundancy and predict link breakage, an enhanced protocol, i.e. S-OLSR (More Scalable OLSR) protocol has been proposed. At the end, a comparison among different existing protocols, i.e. DSR, AODV, OLSR with the proposed protocol, i.e. S-OLSR is drawn by using the NS-2 simulator.

Proposal and Simulation of Flow Control and Error Recovery in EAP for Performance Improvement (EAP 성능 향상을 위한 흐름 제어 및 오류 복구 방식의 제안과 시뮬레이션)

  • Cha, Eun-Chul;Han, Chan-Kyu;Choi, Hyoung-Kee
    • The KIPS Transactions:PartC
    • /
    • v.16C no.3
    • /
    • pp.299-306
    • /
    • 2009
  • Followed by the popularity of the Internet, a number of access technologies to the Internet have been developed. EAP is an authentication framework. It is designed to provide the authentication functionality in the access network. Because of its flexibility and extensibility EAP poses a global solution for the authentication supported by many access networks. However, EAP has critical weaknesses in the protocol which may, in turn, decrease the EAP performance. Some of the weaknesses are caused by the "lock-step" flow control which only supports a single packet in flight. Considering the weaknesses, we propose a solution for the flow control. Using simulation we prove that our solutions improve the EAP performance.

Gigabit Ethernet Based Substation

  • Yang, Hyo-Sik;Raza, Ali;Park, Min-Woo;Kim, Sang-Sig;Jang, Hyuk-Soo;Lee, Myung-Ho;Kwon, Dong-Seop;Jang, Byung-Tae
    • Journal of Power Electronics
    • /
    • v.9 no.1
    • /
    • pp.100-108
    • /
    • 2009
  • Designing communication architecture for substation automation is a challenging and subtle task for visualizing substations in the digital world under the umbrella of IEC61850. Communication paradigms for substation automation are of critical importance because of two reasons; the communication arena is changing daily and opts for convenience and simple deployment at a lower migration cost and interoperability is one of the core constrains of IEC61850 for substation automation. This paper presents an analysis and outline of the crucial need for the deployment of Gigabit Ethernet in substations and also presents suggestions on how Ethernet technology can help in substation automation. Ethernet is one of the most pervasive communication technologies available and can provide a long term solution in the changing arena of communication. We have performed simulations in NS-2 to prove that our suggested communication paradigm is optimal in various regards with consideration of the constraints imposed by IEC61850.

Crystal growth and scintillation properties of CsI:Na (CsI:Na 결정 육성과 섬광 특성)

  • Cheon, Jong-Kyu;Kim, Sung-Hwan;Kim, H.J.
    • Journal of Sensor Science and Technology
    • /
    • v.19 no.6
    • /
    • pp.443-448
    • /
    • 2010
  • In this work, the scintillation properties of CsI:Na crystal were investigated as radiation detection sensor. This scintillation material was grown by a 2-zone vertical Bridgman method. Under X-ray excitation the crystal shows a broad emission band between 280 nm and 690 nm wavelength range, peaking at 413 nm. Energy resolution for $^{137}Cs$ 662 keV $\gamma$-rays of the crystal was measured to be 6.9 %(FWHM). At room temperature, the crystal exhibits three exponential decay time components. The fast and major component of scintillation time profile of the crystal emission decays with a 457 ns time constant. Absolute light yield of the crystal was estimated to be 53,000 ph/MeV using LAAPD. The sample crystal shows proportionality of 30 % in the measured energy range from 31 to 1,333 keV. And the $\alpha/\beta$ ratio of the crystal was 0.14.

Partial Bicasting with Buffering for Proxy Mobile IPv6 Handover in Wireless Networks

  • Kim, Ji-In;Koh, Seok-Joo
    • Journal of Information Processing Systems
    • /
    • v.7 no.4
    • /
    • pp.627-634
    • /
    • 2011
  • This paper addresses the Proxy Mobile IPv6 (PMIP) handover using bicasting in mobile/wireless networks. The bicasting scheme can be used to support the PMIP handover, which tends to waste the network resources of wireless links and incurs data losses during handover. We propose an enhanced scheme of PMIP handover, called the partial bicasting with buffering for PMIP (PBB-PMIP). In the PBB-PMIP handover, the bicasting is performed in the "partial" region between the Local Mobility Anchor (LMA) and the Mobile Access Gateway (MAG), when a mobile node is in the handover area. The data packets are buffered at the new MAG during handover to reduce data losses and are then forwarded to mobile nodes after handover. By ns-2 simulations, the proposed PBB-PMIP scheme is compared with the existing schemes of PMIP and PMIP with bicasting. The proposed scheme can benefit from the reduction of handover delay and packet loss, and the effective use of the network resources of wireless links, as compared to the existing handover schemes.

Evaluation of Drought Tolerance of Pleurospermum camtschaticum, Cirsium setidens and Parasenecio firmus Obtained from Pressure-Volume Curves (P-V 곡선을 통한 누룩치, 고려엉경퀴, 병풍쌈의 내건성 평가)

  • Lee, Kyeong-Cheol;Han, Sang-Sup
    • Korean Journal of Medicinal Crop Science
    • /
    • v.20 no.1
    • /
    • pp.36-41
    • /
    • 2012
  • This study was carried out to establish a proper cultivation site and diagnose the drought tolerance of Pleurospermum camtschaticum, Cirsium setidens and Parasenecio firmus leaves by using pressure-volume curves. The result of ${\Psi}_o^{sat}$ and ${\Psi}_o^{tlp}$ were lower in Pleurospermum camtschaticum leaves. On the other hand, it appeared that $E_{max}$ of Pleurospermum camtschaticum was approximately six times higher than that of Parasenecio firmus. The values of $RWC^{tlp}$ is all above 88% showing that the function of osmoregulation is somewhat better, and Vo/DW, Vt/DW, Ns/DW of Pleurospermum camtschaticum leaves were approximately 2~4 times Lower than other ones. Thus, responses to water relations of Pleurospermum camtschaticum, Cirsium setidens and Parasenecio firmus such as ${\Psi}_o^{sat}$, ${\Psi}_o^{tlp}$, $E_{max}$, ${\Psi}_{P,max}$, $RWC^{tlp}$ were shown that the Pleurospermum camtschaticum leave was higher drought tolerance than Cirsium setidens and Parasenecio firmus leaves.