• 대한전자공학회논문지TC
• /
• 제44권7호통권361호
• /
• pp.70-80
• /
• 2007

차세대 이동 네트워크에서는 다양한 무선 접속 기술이 공존하게 된다. 이에 따라, 다양한 무선망에서 QoS를 지원하는 분산 방식의 호 수락 제어 구조인 SmartCAC를 제안한다. 본 논문은 네트워크간 정보 수집이 필요없는 분산방식을 위하여 모바일 노드와 네트워크간의 상호동작을 이용한다. SmartCAC는 기본적으로 VHO 호와 새로운 호1의 구분이 가능하도록 함으로써 VHO 호에 핸드오프를 위해 예약된 채널을 사용할 수 있도록 한다. 또한, 효율적인 호 수락 제어를 위하여 QoS 요구와 네트워크 사용에 대한 delay와 reliability를 다룬다. 뿐만 아니라, 이종망에서 네트워크 필터링을 할 수 있도록 모바일노드의 스피드를 이용한다. 이종망의 상태정보를 알 수 없는 모바일노드가 네트워크의 상태정보를 받아 비교할 수 있도록 확장된 프로토콜을 제시하고, 시뮬레이션 연구에서 기존의 CAC 방식과 제어메시지에 의한 비용을 비교하여 37%에서 96%까지 향상되는 효과를 입증한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.149-152
• /
• 2004

Speed and torque control of PMSM(Permanent Magnet Synchronous Motor) are usually achieved by using position and speed sensors which require additional mounting space, reduce the reliability in harsh environments and increase the cost of a motor. Therefore, many studies have been performed for the elimination of speed and position sensors. In this paper, a novel speed sensorless control of a permanent magnet synchronous motor based on SVMR(Support Vector Machine Regression) is presented. The SVM regression method is an algorithm that estimates an unknown mapping between a system's input and outputs, from the available data or training data. Two well-known different voltage model is necessary to estimate the speed of a PMSM. The validity and the usefulness of proposed algorithm are thoroughly verified through numerical simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.251-253
• /
• 2006

Speed and torque controls of permanent magnet synchronous motors are usually attained by the application of position and speed sensors. However, speed and position sensors require the additional mounting space, reduce the reliability in harsh environments and increase the cost of a motor. Therefore, many studies have been performed for the elimination of speed and position sensors. This paper investigates a novel sensorless control of a permanent magnet synchronous motor. The proposed control strategy utilizes the active and reactive torque control for maximizing the active torque of a sensorless PMSM. The proposed algorithm is verified through the simulation and experimentation.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2011년도 한국컴퓨터종합학술대회논문집 Vol.38 No.1(B)
• /
• pp.41-43
• /
• 2011

Cyber-Physical Systems are tight integration of computation, networking and physical objects to sense, monitor, and control the physical world. This paper presents a novel architecture that combines two next generation technologies i.e. cyber-physical systems and Cloud computing to develop a ubiquitous healthcare based infrastructure. Through this infrastructure, patients and elderly people get remote assistance, monitoring of their health conditions and medication while living in proximity of home. Consequently, this leads to major cost savings. However, there are various challenges that need to be overcome before building such systems. These challenges include making system real-time responsive, reliability, stability and privacy. Therefore, in this paper, we propose an architecture that deals with these challenges.

• 전기학회논문지P
• /
• 제58권2호
• /
• pp.207-213
• /
• 2009

Electrolytic capacitors have been widely used in power electronics system because of the features of large capacitance, small size, high-voltage, and low-cost. Electrolytic capacitors, which is most of the time affected by aging effect, plays a very important role for the power electronics system quality and reliability. Therefore it is important to estimate the parameter of an electrolytic capacitor to predict the failure. This paper proposed a novel fault diagnosis method of an electrolytic capacitor used for voltage smoothing in boost DC converter. The equivalent series resistance(ESR) of electrolytic capacitor estimated from FFT result of filtered waveform of capacitor voltage/current. Main advantage of the proposed method include circuit simplicity and easy implementation. Simulation and experimental results are shown to verify the performance of the proposed method.

• Journal of information and communication convergence engineering
• /
• 제6권4호
• /
• pp.417-420
• /
• 2008

Solar electric systems have very little impact on environment, making them one of the cleanest power-generating technologies available. While they are operating, PV systems produce no air pollution, hazardous waste, or noise, and they require no transportable fuels. In PV system design, the selection and proper installation of appropriately-sized components directly affect system reliability, lifetime, and initial cost. In this research, we have studied the PWM(Pulse Width Modulation) signals. I proposed an efficient photovoltaic power interface circuit incorporated with a DC-DC converter and a sine-pwm control method full-bridge inverter. In grid-connected solar power systems, the DC-DC converter operates at high switching frequency to make the output current a sine wave, whereas the full-bridge inverter operates at low switching frequency which is determined by the ac frequency. Thus, it can reduce the switching losses incurred by the full-bridge inverter. Full-bridge converter is controlled by using microprocessor control method, and its operation is verified through computer aided simulations.

• Structural Engineering and Mechanics
• /
• 제17권3_4호
• /
• pp.303-329
• /
• 2004

Magnetostrictive materials are routinely employed as actuator and sensor elements in a wide variety of noise and vibration control problems. In infrastructural applications, other technologies such as hydraulic actuation, piezoelectric materials and more recently, magnetorheological fluids, are being favored for actuation and sensing purposes. These technologies have reached a degree of technical maturity and in some cases, cost effectiveness, which justify their broad use in infrastructural applications. Advanced civil structures present new challenges in the areas of condition monitoring and repair, reliability, and high-authority actuation which motivate the need to explore new methods and materials recently developed in the areas of materials science and transducer design. This paper provides an overview of a class of materials that because of the large force, displacement, and energy conversion effciency that it can provide is being considered in a growing number of quasistatic and dynamic applications. Since magnetostriction involves a bidirectional energy exchange between magnetic and elastic states, magnetostrictive materials provide mechanisms both for actuation and sensing. This paper provides an overview of materials, methods and applications with the goal to inspire novel solutions based on magnetostrictive materials for the design and control of advanced infrastructural systems.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.62-65
• /
• 2003

VLM-ST process requires an additional human interaction due to the manual stacking and bonding. Hence, building time, building cost and the part quality are dependent on the skill of labor. In this present work, a novel rapid prototyping (RP) process, as an automatic VLM-ST (VLM-STA), has been proposed to improve building efficiency of VLM-ST process and reliability of products. The apparatus of VLM-STA is designed to embody the process. Several characteristics of the proposed process and the apparatus are discussed. In order to examine the efficiency and the applicability of the proposed process, various three-dimensional shapes, such as a piston and a human head shape, are fabricated on the apparatus.

• 동력기계공학회지
• /
• 제3권2호
• /
• pp.70-78
• /
• 1999

The vector controlled induction motor(I.M) with speed sensor has been widely used for variable speed drive systems. In these application fileds, speed sensorless control are expected strongly to progress reliability, simplicity and cost performance of I.M and to expand its application part. This paper describes a novel speed sensorless control method of I.M based on feedforward quick torque response control technique. Especially, this paper aimed at the realization of sensorless control in the very low speed region, The proposed method can be formulated simply from a motor circuit equation and conducted easily by detecting primary motor currents and a voltage command at every sampling time. Throughout some results of numerical simulations with the assumption of using a pulse width modulation(PWM) voltage source inverter, the validity of the method was successfully confirmed.

• 한국소음진동공학회논문집
• /
• 제19권4호
• /
• pp.393-399
• /
• 2009

Historically, industrial condition monitoring has been performed by costly hard-wired sensors or infrequent checks by maintenance personnel equipped with hand held monitoring equipment. Self- powered wireless condition monitoring systems provides on-line monitoring of critical plant and machinery providing major operating cost benefits. A vibration energy harvester(VEH) is a device that converts kinetic energy occurred by machine vibration into useable electrical energy. Using VEHs to power wireless monitoring systems can yield significant benefits: increased reliability, lower life time costs and no battery disposal issues, etc. This paper proposes the novel prototype design and manufacturing of a VEH that can eliminate the effect by failed batteries.