• The Korean Journal of Pesticide Science
• /
• v.19 no.1
• /
• pp.54-63
• /
• 2015

Streptomyces spp. isolated from turfgrass rhizosphere and tested for their response to large-patch control fungicides. The tested fungicides were actually used in golf course or turfgrass cultivation to prevent large-patch disease. Tolerance to 3 triazole group of the strains was the highest to the PR fungicide, and following the SR fungicide, whereas the isolated strains were no tolerance to HR fungicide. Tolerances to three kind of Strobilurin group were similar for the all of the tested Streptomyces spp.. Growth and sporulation of the all strain was normal in CB and AP fungicide treatments. However no spore formulated in double concentration. Strains, tolerance to acetanilide fungicides, appeared that KT fungicide tolerance was higher than MK fungicide. The selected strains showed strong tolerance against AT fungicide but have no tolerance to ATR fungicides. In conclusion, the bacterial strains showed tolerance against 1 carbamate, 1 organophosphate and 1 cyanopyrrole group, while have no tolerance against two mixture formulations (1 Quinone + Strobilurin and 1 Imidazole + Triazole).

• Archives of Plastic Surgery
• /
• v.36 no.5
• /
• pp.531-537
• /
• 2009

Purpose: Alveolar bone grafting has become an essential process in the treatmemt of alveolar cleft patient for stabilization of the maxillary arch, elimination of oronasal fistula, the reconstruction of the soft tissue nasal base support, and creation of bony support for tooth eruption for implant. The use of Autologous iliac cancellous bone is preferable because of the adequate quantity and high osteoinductive potential. However, even with iliac bone, insufficient osteoregeneration and absorption occur due to several factors such as the patient's age, cleft width, functional stress, and others. In order to increase osteoregeneration where the iliac bone is placed, the present study is associated with bone marrow aspirate (BMA). The experimental study evaluated the efficacy of osteoregeneration in normal cleft rabbits when alveolar bone grafting was performed with autologous iliac corticocancellous bone. Methods: Twenty - four New Zealand White rabbits were divided randomly into 2 groups (BMA, control). All animals underwent harvesting of corticocancellous bone graft from the right posterior iliac crest via standard surgical technique. $1m{\ell}$ of BMA were obtained by scraping the needle and aspirate with $10m{\ell}$ syringe from the contralateral iliac bone wall. The muco - periosteal flap on the palate was elevated. A mixture of Equal bone's volumes with BMA and saline as its control was inserted into the cleft. Animals were sacrificed at 2, 4, and 8 weeks and maxilla was harvested for dental peri - apical X-ray, bone matrix density (BMD),and histologic analysis. Result: BMD of regenerated bone to the cleft in the rabbits was higher than that of the control rabbits. X-ray, histologic analysis showed that increased osteoregeneration and low absorption rate were observed in the BMA group. Conclusion: Our experimental study showed BMA enhanced the osteoregeneration and survival rate of alveolar bone grafting. BMA is easy to extract & cost - time effective. So it can be an effective enhancers for bone grafting mixtures.

• Membrane Journal
• /
• v.25 no.5
• /
• pp.398-405
• /
• 2015

Facilitated transport is considered to be a possible solution to simultaneously improve permeability and selectivity, which is challenging in normal polymeric membranes based on solution-diffusion transport only. We investigated the effect of adding mesoporous $TiO_2$ ($m-TiO_2$) upon the separation performance of facilitated olefin transport membranes comprising poly(vinyl pyrrolidone), Ag nanoparticles, and 7,7,8,8-tetracyanoquinodimethane as the polymer matrix, olefin carrier, and electron acceptor, respectively. In particular, $m-TiO_2$ was prepared by means of a facile, mass-producible method using poly(vinyl chloride)-g-poly(oxyethylene methacrylate) graft copolymer as the template. The crystal phase of $m-TiO_2$ consisted of an anatase/rutile mixture, of crystallite size approximately 16 nm as determined by X-ray diffraction. The introduction of $m-TiO_2$ increased the membrane diffusivity, thereby increasing the mixed-gas permeance from 1.6 to 16.0 GPU ($1GPU=10^{-6}cm^3$(STP)/($s{\times}cm^2{\times}cmHg$), and slightly decreased the propylene/propane selectivity from 45 to 37. However, both the mixed-gas permeance and selectivity of the membrane containing $m-TiO_2$ rapidly decreased over time, whereas the membrane without $m-TiO_2$ had more stable long-term performance. This difference might be attributed to specific chemical interactions between $TiO_2$ and Ag nanoparticles, causing Ag to lose activity as an olefin carrier.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.220-220
• /
• 2013

Surface-normal transmission electro-absorption modulator (EAM) are attractive for high-definition (HD) three-dimensional (3D) imaging application due to its features such as small system volume and simple epitaxial structure [1,2]. However, EAM in order to be used for HD 3D imaging system requires uniform modulation performance over large area. To achieve highly uniform modulation performance of EAM at the operating wavelength of 850 nm, it is extremely important to remove the GaAs substrate over large area since GaAs material has high absorption coefficient below 870 nm which corresponds to band-edge energy of GaAs (1.424 eV). In this study, we propose and experimentally demonstrate a transmission EAM in which highly selective backside etching methods which include lapping, dry etching and wet etching is carried out to remove the GaAs substrate for achieving highly uniform modulation performance. First, lapping process on GaAs substrate was carried out for different lapping speeds (5 rpm, 7 rpm, 10 rpm) and the thickness was measured over different areas of surface. For a lapping speed of 5 rpm, a highly uniform surface over a large area ($2{\times}1\;mm^2$) was obtained. Second, optimization of inductive coupled plasma-reactive ion etching (ICP-RIE) was carried out to achieve anisotropy and high etch rate. The dry etching carried out using a gas mixture of SiCl4 and Ar, each having a flow rate of 10 sccm and 40 sccm, respectively with an RF power of 50 W, ICP power of 400 W and chamber pressure of 2 mTorr was the optimum etching condition. Last, the rest of GaAs substrate was successfully removed by highly selective backside wet etching with pH adjusted solution of citric acid and hydrogen peroxide. Citric acid/hydrogen peroxide etching solution having a volume ratio of 5:1 was the best etching condition which provides not only high selectivity of 235:1 between GaAs and AlAs but also good etching profile [3]. The fabricated transmission EAM array have an amplitude modulation of more than 50% at the bias voltage of -9 V and maintains high uniformity of >90% over large area ($2{\times}1\;mm^2$). These results show that the fabricated transmission EAM with substrate removed is an excellent candidate to be used as an optical shutter for HD 3D imaging application.

• Journal of Veterinary Clinics
• /
• v.12 no.1
• /
• pp.799-818
• /
• 1995

This study was performed to examine the general anesthetic efficacy of tiletamine-zolazepam, a mixture of phencyclidine-derived tiletamine and benzodiazepine-related zolazepam. The antagonistic activities of doxapram and yohimbine to the anesthetic effects of tiletamine-zolazepam were also studied. Thirty healthy mongrel dogs were divided into three groups (each of 10) twenty minutes after being anesthetized with tiletamine-zolazepam : T-Z-S group(tiletamine-zolazepam-saline), T-Z-D group (tiletamine -zolazepam-doxapram), T-Z-Y group (tiletamine-zolaz.pam-yohim bine). Various parameters wert evaluated in terms of the onset and recovery time of analgesia, respiration rates, hear rates, body temperature, electrocardiogram, blood chemistry, and lymphocyte blastogenesis. The results obtained through these experiment could be summarized as follows: 1. he anesthetic efficacy of tiletamine-zolazepam was considered desirable, with the onset time of anesthesia being as short as 0.23-0.24 minutes. 2. Both of the antagonistic effects of yohimbine and doxapram on the anesthesia induced by liletamine-zolazepan were evaluated statistically significant(p<0.05) as the recovery time was shortened from 39.3$\pm$4.9 min(T-Z-S group) to 25.3$\pm$2.9 nin(T-Z-Y group) and 29.9$\pm$8.8min(T-Z-D group), respectively. 3. Respiration rates were not changed by the treatments of both doxapram and yohimbine, with the only transient increase in the T-Z-D group. The changes in the respiration rate were not observed during the whole time course of the experiment. 4. Yohimbine(T-Z-Y group) increased the heart rate significantly from 30 minutes after the adminstration compared to the T-Z-S group and T-Z-D group (p<0.05). 5. The decreases in th, body temporature were observed from 30 minutes in the T-Z-S group(p<0.05) and 40 minutes in th, T-Z-D group(p<0.05), after the adminstration. On the other hand, there was no hypothermia in the T-Z-Y group. 6. In the all experimental groups of the T-Z-S, T-Z-D and T-Z-Y, there were no specific findings on the electrocardiograph incept slight shift to the tachycardia in all cases. 1. We could not find any differences in the blood chemistry between all experimental groups (T-Z-S, T-Z-D and T-Z-Y). 8. the inhibition of the lymphocyte blastogenesis shown in the T-Z-S with 3 hours decreasing and thereafter restoring to the normal values up to the point 5 hours were not occurred in the T-Z-D and T-Z-Y groups. With the above results, we could conclude that both doxapram and yohimbine can be clinically used as recovery agents towards anesthesia by tiletamine- zolazepam fi:on the efficacy point of view, but yohimbine is more recommendable in this case if considering the recovery time and lymphocyte blastogenesis.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.5
• /
• pp.778-784
• /
• 2004

This study was conducted to investigate the application possibility of leaf and stem extract (LSE) from the mixture of leaf and stem of Panax ginseng. This study measured the general nutritional composition, aminoacid minerals contents and fatty acid composition of LSE. We conducted analysis of the ginsenoside content by HPLC and the cell cytotoxicity tests in normal liver and kidney cells. The approximate composition of LSE was 2.51% of carbohydrate 0.53% of crude ash,0.20% of crude fat and 0.15% of crude protein, respectively. LSE contained 102.56 mg/100 g of K ion and high contents of acidic amino acids such as glutamic acid and aspartic acid. In addition to this, it contained all essential amino acids. The major compositions of fatty acids were 39.99% of palmitic acid 14.96% of linoleic acid, 13.31% of docosatetranoic acid and 12.91% of linolenic acid, The total ginsenoside was 0.82 mg/mL, and ratio of PD/PT was 0.68. Negative effects were not found from the results of the cell toxicity respection. These results imply that leaf and stem of Panax gineng could be used as possible food resources and functional food material and feed stuff.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.123-132
• /
• 2012

Gas sensors has been used very differently that depending on following purposes; Automotive (exhaust gas, fuel mixture gas, oxygen, particulates), agriculture / food industry (fresh, stored, CO2, humidity, NH3, nitrogen oxide gas, organic gas, toxic gas emitted from pesticides and insecticides), industrial / medical (chemical gas, hydrogen, oxygen and toxic gases), military (chemical weapon), environmental measurements (CO and other air pollution consisting of sulfur and nitrogen gas), residential (LNG, LPG, butane, indoor air, humidity). The types of industrial toxic substances are known about 700 species and many of these exist in gaseous form under normal conditions. he multi-gas detection sensors will be developed for casualties that detect the most important and find easy three kinds of gases in marine plant; carbon dioxide(CO2), carbon(CO), ammonia(NH3). Package block consists of gas sensing device minor ingredient, rf front end, zigbee chip. Develope interworking technology between the sensor and zigbee chip inside a package. Conduct a performance test through test jig about prototype zigbee sensor module with rf output power and unwanted emission test. This research task available early address when poisonous gas leaked from large industrial site and contribution for workers' safety at the enclosed space.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.5
• /
• pp.739-748
• /
• 2019

Cheonggukjang and chaga mushrooms have numerous health benefits, and have been used in alternative medicine. Therefore, a powder mixture of 98: Cheonggukjang and 2: Chaga extracts was fermented with Lactobacillus acidophilus KCTC3925 (FCC) and its anti-obesity effects in high-fat diet (HFD)-induced obese mice were determined. Five-week-old male ICR mice were fed a normal diet or HFD in the presence or absence of 3% and 5% FCC by weight (n = 10 per group). After 12 weeks, the mice were sacrificed, and the serum and tissue samples were collected for analysis. Body weight and epididymal fat pad weight were significantly lowered in the 3% and 5% FCC groups compared with those in the HFD control group (p < 0.01). FCC supplementation suppressed serum triglyceride and increased serum HDL-C levels (p < 0.01). Serum GOT, GPT, and leptin levels, hepatic COX-2 mRNA expression, and splenic COX-2 and IL-4 mRNA expression were significantly higher in the HFD groups than in the control group (p > 0.05); however, except for splenic IL-4 levels, the increases were significantly attenuated by FCC supplementation. Expression of ICAM-1, an aortic inflammatory marker, was significantly increased in the HFD group; this effect was suppressed in the 3% FCC group (p < 0.01) but not in the 5% FCC group. FCC suppressed the body weight and epididymal fat pad weight gain, as well as inflammatory responses in the liver and spleen of HFD-fed mice. Thus, FCC supplementation will be beneficial for the treatment of obesity-related effects.

• Herbal Formula Science
• /
• v.29 no.2
• /
• pp.81-91
• /
• 2021

Objectives : This study was conducted to evaluate the efficacy of a complex mixture of natural substances of ginseng and baeknyeoncho on the arthritic rats. Methods : In vitro experiments were conducted to ensure the stability of the complex. After setting toxicity and concentration by MTT assay, the antioxidant effect was measured through DPPH and ABTS radical scavenging activity. To confirm the anti-inflammatory effects of the complex, levels of nitric oxide (NO) and pro-inflammatory cytokines (IL-1β, TNF-α) were measured in LPS-treated macrophage cell lines (RAW264.7). We injected monosodium iodoacetate (MIA) 50 μl (60 mg/ml) into knee joints of rats to induce osteoarthritis. The rats were divided into three groups (normal (n=5), control (n=5), and OR (n=5) group). The control group consumed 2 mg/kg of physiological saline once a day for 4 weeks, and the OR group was mixed at a concentration of 416.5 mg/kg of Baengnyeoncho (O) and 208.25 mg/kg of red ginseng (R) and ingested 1 mL each 5 days a week. Results : This complex increased the DPPH and ABTS radical scavenging rate. The complex decreased NO production and pro-inflammatory cytokine production of macrophages. In the OR group, the secretion of cytokine in serum was decreased. In histopathological examination, the joint tissue of the composite showed less damage to the synovial membrane, cartilage, and fibrous tissue than the control group. Conclusions : As a result of this study, natural complexes have antioxidant, anti-inflammatory and cartilage protection effects. Therefore, we expect the complex to be effective in treating osteoarthritis.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.585-593
• /
• 2021

This study investigates the compressive strength of high-strength cement composites with 64 mixture designs and 2 curing conditions. The cement composites were designed with varying water-to-binder ratios, silica fume content to cement, and binder content per unit volume of cement composite to explore compressive strength development depending on its mix design. An increase in the water-to-binder ratio decreased the compressive strength of the composites, having consistency with the trend in normal concrete. The compressive strength increased with ages at an ambient curing temperature, but it was not identified at high-temperature curing. The compressive strength development was negligible in case that silica fume content to OPC is 15%~25%, but a decrease in the con ten t below 15% reduced compressive stren gth. It was more obvious in the specimen of low water-to-binder ratio. The specimen with 840kg/m³ of binder content per unit volume had the highest compressive strength in this study, and the decrease in binder content reduced the compressive strength of high strength cement composites in low silica fume content.