• 한국항해항만학회지
• /
• 제35권1호
• /
• pp.57-62
• /
• 2011

해양에너지를 지역냉난방설비의 에너지원으로 활용하기 위한 방법론적 관점에서 출발한 본 연구의 목적은 부산시의 지리정보를 이용하여 500m${\times}$500m 메시를 개발하고, 메시 특성에 따른 유형별 분포도를 작성하는 것이다. 연구성과를 정리하면 다음과 같다. 부산광역시의 총 16개 단위행정구역 중 연제구, 중구, 해운대구를 제외한 13개 구군(區郡), 108개 동(洞)별 유효 건축정보와 수치지도를 이용하여 500m${\times}$500m 메시를 개발하였다. 총 3,289개 메시가 유효한 건물바닥면적을 갖고 있으며, 그 중 용적률 50% 이상인 메시는 325개(9.9%), 100% 이상인 메시는 59개(1.8%), 200% 이상인 메시는 30개(0.9%), 300% 이상인 메시는 25개(0.8%)로 나타났다. 용적률 50% 이상인 325개 메시를 주성분분석과 클러스터분석에 의해 5개 유형으로 분류하였고 이를 500m${\times}$500m 메시 맵 위에 분포도를 작성한 결과, 상업시설 중심의 1유형은 수영구 광안동, 주거시설 중심의 4, 5유형은 남구 용호동 등이 대표 지역으로 나타났으며, 부산의 대표 유형으로써 주거중심의 주상복합 특성을 갖는 3유형은 남구, 동래구, 북구, 사상구 등 부산 전역에 고르게 분포하는 것으로 나타났다.

• 전자공학회논문지
• /
• 제50권5호
• /
• pp.199-207
• /
• 2013

스핀 영상은 3차원 표면의 특징을 효과적으로 표현하기 때문에 3차원 얼굴에서 특징점을 검출하는데 많이 이용된다. 하지만 기존의 스핀 영상은 표면의 법선 벡터 방향에 따라 매우 다른 스핀 영상이 만들어지는 단점이 있다. 또한 해당 영역 내에 존재하는 모든 점을 2차원으로 변환하여 고려하기 때문에 3차원 표면 특징이 모호해질 수 있다. 본 논문에서는 검색 영역을 분할한 스핀 영상을 이용하는 3차원 얼굴 특징점 검출 방법을 제안하였다. 기준점으로부터 떨어진 각도에 따라 검색범위를 분할하여 분할된 영역 내 점들에 대해 스핀 영상을 구성하여 방향에 따른 특징 추출을 극대화했다. 법선 벡터 평탄화를 이용하여 표면 법선 벡터 방향에 대한 잡음 민감성을 줄여 정확한 형태의 스핀 영상을 얻도록 했다. 실험을 통해 제안한 방법으로 찾은 특징점과 실측 특징점과의 거리차를 비교하여 기존방법에 비해 약 34% 향상된 정확도를 얻음을 확인했다.

• 대한한의학방제학회지
• /
• 제23권1호
• /
• pp.121-131
• /
• 2015

Objectives : This study was conducted to investigate the membrane potential to apply Doksam-tang to a human heart failure model. Methods : The human heart model was built by Luo et al. CellML model, Priebe et al. CellML model, and a human heart mesh file. Doksam-tang gives channel the half maximal inhibitory concentration(IC ₅₀ ), half maximal effective concentration(EC ₅₀ ) values and compounds concentrations. These data load into the laptop with Ubuntu OS, and build the library with the data. Results : While results of the study with the heart failure model shows abnormal membrane potential from the normal heart model, the study with applying Doksam-tang to heart failure model shows restoring membrane potential that is similar to normal heart model. Conclusions : These results of the testings suggest that a conception of novel technique to investigate the effects of Korean herbal medicine.

• Steel and Composite Structures
• /
• 제42권6호
• /
• pp.843-853
• /
• 2022

The fatigue behavior of welded open rib-to crossbeam joints (ORCJ) in orthotropic bridge structures is investigated using a traction structural stress method. The fatigue behaviors of welded open rib-to crossbeam joints have been a subject of study for decades for ensuring operational safety and future design improvement. A mesh-insensitive combination of traction structural stresses in ORCJ was obtained considering the effect of in-plane shear stress and validated by fatigue test results. The proposed method is advantageous for predicting fatigue cracks that initiate from the crossbeam cutout and propagate along the crossbeam. The investigations carried out with the proposed approach reveal that the normal structural stress decreases with the propagation of fatigue cracks, while the ratio of shear stress to normal stress increases. The effect of shear structural stress is significant for the analysis of fatigue behavior of ORCJ in multiaxial stress states.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.451-457
• /
• 2000

In many dynamic problems such as foundation vibrations ultrasonic nondestructive evaluation and blasting analysts are confronted with the problem of wave propagation in an infinite or semi-infinite media. In order to simulate this situation by a finite analytical model provisions must be made to absorb the stress waves arriving at the boundary. Absorbing boundaries are mathematical artifacts used to prevent wave reflections at the boundaries of discrete models for infinite media under dynamic loads. An analytical study is carried out to examine the effectiveness of Lysmer-Kuhlemeyer model one of the most widely used absorbing boundaries. Validity of the absorbing boundary conditions suggested by Lymer-Kuhlemeyer is examined by adopting the solution of Ewing et al. to the problem of plane waves from a harmonic normal force on the surface of an elastic half-space. The Ewing's problem is than numerically simulated using the finite element method on a semi-circular mesh with and without absorbing boundaries which are represented by viscous dashpots. The absorption ratios are calculated by comparing the displacements at the absorbing boundaries to those at the free field without absorbing boudaries.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.680-695
• /
• 1998

The objective of this study is to optimize the responses of the creep feed ceramic grinding process simultaneously by an off-1ine multicriteria optimization methodology. The responses considered as objectives are material removal rate, flexural strength, normal grinding force, workpiece surface roughness and grinder power. Alumina material was ground by the creep feed grinding mode using superabrasive grinding wheels. The process variables optimized for the above objectives include grinding wheel specification, such as bond type, mesh size, and grit concentration, and grinding process parameters, such as depth of cut and feed rate. A weighting method transforms the multi-objective problem into a single-objective programming format and then, by parametric variation of weights, the set of non-dominated optimum solutions are obtained. Finally, the multi-objective optimization methodology was tested by a sensitivity analysis to check the stability of the model.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권6호
• /
• pp.306-313
• /
• 2006

A three dimensional adaptive finite element refinement algorithm is developed for non-linear magnetostatic field problems. In the method, the edge elements are used for finite element formulation, and the local error in each element is estimated from the fact that the tangential components of magnetic field intensity and the normal components of magnetic flux density should be continuous at the interface of the two adjacent elements. Based on the estimated error, the elements which have big error are divided into several elements using bisection method. The effectiveness of the developed algorithm is proved through numerical examples.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.545-548
• /
• 1998

Thin film SOI(Silicon-On-Insulator) devices exhibit floating body effect. In this paper, SOI NMOSFET is proposed to solve this problem. Some part of gate oxide was considered to be 30nm~80nm thicker than the other normal gate oxide and simulated with TSUPREM-4. The I-V characteristics were simulated with 2D MEDICI mesh. Since part of gate oxide has different oxide thickness in proposed device, the gate electric field strength is not the same throught the gate and consequently the reduction of current kink effect is occurred.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1992년도 춘계학술대회 논문집 92
• /
• pp.201-212
• /
• 1992

The plane strain analysis for simulating the stretch/draw forming operation of arbitrarily-shaped tool profiles and arbitrarily draw-in conditions is introduced. An implicit, incremental, updated Lagrangian formulation is employed, introducing a rigid-viscoplastic constitutive equation. Contact and friction are considered through the mesh-normal, which compatibly describes arbitrary tool surfaces and FEM meshe without depending on the explicit spatial derivatives of tool surfaces. The FEM formulation is tested in the sections automotive inner panel and two-side draw-in. Not only the excellent agreement between measured and computed strains in the stretched section is obtained, but also the numerical stability of current formulation is verified in the two-side draw-in section.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.355-359
• /
• 2001

In this study, experiments were carried out to investigate the characteristics of grinding and wear process of diamond wheel grinding ceramic materials. Normal component of grinding resistance of $AI_2O_3$ was less then that of $Si_3N_4$ and $ZrO_2$. It is because the resistance for grain shedding is less then that for layer formation. For the case of $Si_3N_4$ and $ZrO_2$, as the grain mesh number of wheel increases, the surface roughness decreases. For the case of $AI_2O_3$, the surface roughness does not decreases. For the case of $Si_3N_4$ and $ZrO_2$, grinding is carried out by abrasive wear processes. For the case of $AI_2O_3$, grinding is carried out by grain shedding process.