• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.1
• /
• pp.27-35
• /
• 2012

Purpose: The present study was conducted to compare any difference caused by pigmentation in the centrations and movement patterns on the cornea between circle and soft contact lens with identical material and parameters during lens wearing. Methods: Soft and circle contact lenses with identical material and parameters were applied to twenty eyes with normal tear volume for 3 hrs a day during a total of 5 days and then their lens centrations, the moving distances and rotations by repeat blinking were compared. Results: The lens centration beyond the fitting criteria was shown in initial wears of both soft contact lens and circle contact lens. However, the centration of soft contact lens was changed to the pupil center for being suitable to the fitting criteria with longer wearing time. On the other hand, the decentration of circle contact lens in the horizontal direction was still presented even with longer wearing time. The moving distances of soft contact lens and circle contact lens decreased with the expand of lens wearing but were not significantly different between total wearing period and daily wearing time. The rotation of circle contact lens by repeat blinking was significantly different from that of soft contact lens even when the wearing period was extended. Conclusions: We revealed that the lens centration and movement of circle contact lens on cornea were different from those of regular soft contact lens resulting in bigger difference with the expand of wearing period in the study.

• Tunnel and Underground Space
• /
• v.13 no.6
• /
• pp.486-494
• /
• 2003

When the orientations of joints are measured on a rock exposure, there are frequent cases that are difficult to approach by the surveyor to the target joints or to set up scanlines on the slope. In this study, to complement such limit and weak points, a new algorithm was developed to interpret joint orientation from analyzing the images of rock slope. As a method of arranging the multiple images of a rock slope, the multistage convergent photographing system was introduced to overcome the limitation of photographing direction which existing method such as parallel stereophotogrammetric system has and to cover the range of image measurement, which is the overlapping area between the image pair, to a maximum extent. To determine camera parameters in the perspective projection equation that are the main elements of the analysis method, a new method was developed introducing three ground control points and single ground guide point. This method could be considered to be very simple compared with other existing methods using a number of ground control points and complicated analysis process. So the global coordinates of a specific point on a rock slope could be analyzed with this new method. The orientation of a joint could be calculated using the normal vector of the joint surface which can be derived from the global coordinates of several points on the joint surface analyzed from the images.

• Journal of the Korean Magnetics Society
• /
• v.17 no.5
• /
• pp.188-193
• /
• 2007

We simulated the magnetization reversal behavior of submicron-thickness magnetic films by applying pulses of sub-ns-long durations and amplitudes along the easy axis. The films were rectangular and elliptical $Ni_{80}Fe_{20}$, and their thickness was 2 nm and 4 nm. We observed different behaviors depending upon the shape and thickness of the films and found a normal non-switching in regions in which we expected complete switching after relaxation. In the elliptical film, the non-switching regions were found to be random and to be widely distributed throughout the switching map. The strong demagnetization field along the z-axis, the film thickness direction, is likely responsible for this abnormal behavior. In the rectangular film, the abnormal non-switching regions were less distributed than they were in the elliptical film due to edge domains resulting from the small $M_z$ or demagnetization field during the switching. Our simulation confirms that large demagnetization is detrimental to the ultra-fast magnetization reversal of magnetic ultra-thin films.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.95-101
• /
• 2014

This paper explains effective tracking method for a vehicle cutting in a line on the road automatically. The method employs KLT based on optical flow using play-back image sequence. Main contribution of this paper is play-back image sequence that is in order image frames for rewind direction from a reference point in time. The moment when recognizing camera can read a license plate very well can usually be the reference point in time. The biggest images of object traced can usually be obtained at this moment also. When optic flow is applied, the bigger image of the object traced can be obtained, the more feature points can be obtained. More many feature points bring good result of tracking object. After the recognizing cameras read a license plate on the vehicle suspected of cut-in-line violation, and then the system extracts the play-back image sequence from the tracking cameras for watching wide range. This paper compares using play-back image sequence as normal method for tracking to using play-forward image sequence as suggested method on the results of the experiment and also shows the suggested algorithm has a good performance that can be applied to the unmanned system for watching cut-in-line violation.

• Journal of Science and Technology Studies
• /
• v.7 no.1
• /
• pp.67-90
• /
• 2007

Could STS throw another-colored light on the Hwang's Affair, the scientific fraud committed by Hwang Woo-Suk and his research team in Korea? And could analytic tools of STS unfold another meanings which have been overlooked in most of the traditionally social-sciences-oriented analyses? In this essay, I try to answer these questions by analyzing the Hwang's Affair in the view of STS, especially by using some concepts of actor-network theory(ANT): movement, translation and displacement. I want to say that the Hwang's Affair seems to be a part of normal scientific activity, not an abnormal phenomenon, and as an evidence, focus on the similarities of their life styles between "pure/real scientist" Louis Pasteur and "impure/political scientist" Hwang Woo-Suk. I try to mobilize some concepts of ANT, especially movement, and find out why scientists came to move toward the opposed direction on the pure/real-impure/political line. I suggest that there exists "laboratory politics" as the key factor in this bifurcation. My tentative conclusion is that Pasteur can take a position to make his great world, so-called the Pasteurian world, owing to the success of "double movement" in which he treated his laboratory as a fulcrum to lift up the world, but Hwang degrades himself to "ugly scientific politician" due to the loss of the momentum of his movement; Hwang treated his laboratory only as the symbolic resources and in turn failed to solidify material entities, his real political resources, even though he knew the importance of laboratory.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.2
• /
• pp.37-45
• /
• 2008

In this study, reliabilities of Cu (60 um)/SnAg (20 um) double-bump flip chip assemblies were investigated for the flip chip interconnections on organic substrates with 100 um pitch. After multiple reflows at $250^{\circ}C\;and\;280^{\circ}C$, bump contact resistances were almost same regardless of number of reflows and reflow temperature. In the high temperature storage test, there was no bump contact resistance change at $125^{\circ}C$ up to 2000 hours. However, bump contact resistances slightly increased at $150^{\circ}C$ due to Kirkendall voids formation. In the electromigration test, Cu/SnAg double-bump flip chip assemblies showed no electromigration until about 600 hours due to reduced local current density. Finally, in the thermal cycling test, thermal cycling failure mainly occurred at Si chip/Cu column interface which was found out the highest stress concentration site in the finite element analysis. As a result, Al pad was displaced out under thermal cycling. This failure mode was caused by normal compressive strain acting Cu column bumps along perpendicular direction of a Si chip.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.4
• /
• pp.686-692
• /
• 2006

The impacted teeth were surgically exposed by the closed-eruption technique and orthodontically retracted. The subject of this study are 24 patients(Mx. insiors; 10 Mx. canines; 14) who finished their treatment. The periodontal condition of the impacted teeth and the normally erupted proximal and opposed teeth were compared and analysed. The results are the followings ; 1. When the gingival index, plaque index, pocket depth and attached gingiva in periodontal evaluation were compared, there was no significant difference between the study group and the control group (P>0.05). 2. When the alveolar bone support of the mesial and the distal surface of the maxillary central incisors and proximal teeth was compared, there was no significant difference between the study group and the control group (P<0.05). 3. When the alveolar bone support of the maxillary canines was compared, there was no significant difference between the retracted teeth and the normally erupted teeth(P>0.05). The results above showed that the surgical exposure by closed-eruption technique followed by the orthodontic retraction of the impacted teeth has a positive influence on the regeneration of gingival tissue in clinical practice and is esthetically more stable. And it is considered that the clinicians should give attention to the direction of retraction power and the maintenance of normal shape of the alveolar bone in treatment of maxillary central incisors.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.307-313
• /
• 2016

When liquefied natural gas (LNG) is stored in a tank, it is necessary to maintain low temperature. It is very important that insulation techniques are applied to the LNG cargo because of this extreme environment. Hence, laminated wood, especially plywood, is widely used as the structural member and insulation material in LNG cargo containment systems (CCS). However, fracture of plywood has been reported recently, owing to sloshing effect. Therefore, it is necessary to increase the strength of the structural member for solving the problem. In this study, compressed wood, which is used as a support in LNG independent type B tanks, was considered as a substitute for plywood. Compression and bending tests were performed on compressed wood under ambient and cryogenic temperatures to estimate the mechanical behaviors and fracture characteristics. In addition, the direction normal to the laminates surface was considered as an experimental variable. Finally, the feasibility of using compressed wood for an LNG CCS was evaluated from the test results.

• The Journal of the Korea Contents Association
• /
• v.10 no.11
• /
• pp.318-328
• /
• 2010

This paper as basic work on the regional economic policy of Korean government considers economic conditions and fundamentals of the cold started 5+2 mega-regional economic zones and makes a comparative study of regional economic power of national mega-regional economic zones based on the established economic indicator. Therefore, this study aims to consider henceforward policy direction of the mega-regional economic zone and the validity of the regional economic policy, which promote autonomous mega-regional economic zone in dimension to secure the global competitiveness. According to the comparison result of regional economic power index, the capital area had absolute superiority, while Gangwon, Honam and Jeju areas were relatively weak. Since the given regional conditions are dissimilar, the government must consider regional characteristics and economic fundamentals carefully, as they push henceforth regional development policy for the mega-regional economic zone. What is more, the government should promote a balance of the regional development, through to maintain demand-based policy and demand-pull policy flexibly, which are based on demand analysis, as well as unequal quota budget and policy for regions, which are relatively falling behind in terms of development and income.

• Archives of design research
• /
• v.19 no.6 s.68
• /
• pp.33-38
• /
• 2006

The development of the typeface 'Arita' presents a method and its following results for a corporate typographic identity. Amore pacific established a strategy for a typographic identity as for their high quality corporate culture and as a first step for it was to develop their corporate typeface 'Arita'. The typeface 'Arita' which pursues sharing and accompanying was developed to be used in the body text to enhance the function of the typography. What was needed to develop this typeface for Amore pacific was first, understanding of the corporation, and second, vision to present new direction for a typeface and its appropriate supervision, and third, ability in designing. Therefore, under the leading of Hong-ik University's meta design research institute, the typeface 'Arita' was created by in collaboration with Seoul women's university's modeling research institute and the typeface design specialty company, type space and the design company, Ahn-graphics. There are two kinds of weight in 'Arita' typeface, one is normal 'AritaM' and the other is semibold 'AritaSB'. 'Arita' is produced into TrueTypeFont(TTF) for Windows Operating System and OpenTypeFont(OTF) for Macintosh Operating System.