Abstract
We simulated the magnetization reversal behavior of submicron-thickness magnetic films by applying pulses of sub-ns-long durations and amplitudes along the easy axis. The films were rectangular and elliptical $Ni_{80}Fe_{20}$, and their thickness was 2 nm and 4 nm. We observed different behaviors depending upon the shape and thickness of the films and found a normal non-switching in regions in which we expected complete switching after relaxation. In the elliptical film, the non-switching regions were found to be random and to be widely distributed throughout the switching map. The strong demagnetization field along the z-axis, the film thickness direction, is likely responsible for this abnormal behavior. In the rectangular film, the abnormal non-switching regions were less distributed than they were in the elliptical film due to edge domains resulting from the small $M_z$ or demagnetization field during the switching. Our simulation confirms that large demagnetization is detrimental to the ultra-fast magnetization reversal of magnetic ultra-thin films.
[ $1.00{\times}0.24\;{\mu}m^2$ ] 크기의 $Ni_{80}Fe_{20}$ 박막의 자화 반전 거동을 자화 용이축으로 1 ns 이하의 펄스 자기장의 지속 시간과 세기를 변수로 인가하여 micromagnetics 시뮬레이션으로 관찰하였다. 자성 박막은 직사각형과 타원형의 모양을 가지며, 두께는 2 nm와 4 nm로 설정하였다. 실험 결과 $Ni_{80}Fe_{20}$ 박막의 두께와 모양에 따라 각각 다른 경향을 보이는 것을 확인할 수 있었다. 박막의 두께에 따라 두께 방향으로 형성되는 반자장의 크기 차에 의해 edge domain에서 스핀의 회전속도와 스핀 스위칭의 거동에 차이가 생기며, 박막이 두꺼울수록 자화 반전에 더 긴 펄스 지속 시간과 강한 펄스 자기장이 필요하다는 것을 확인하였다. 한편, 자화 반전이 예상되는 영역에서 자화 반전이 일어나지 않는 비정상적인 자화 반전 영역을 발견할 수 있었는데, 박막의 모양이 타원일 때와 박막의 두께가 얇은 경우에 그 영역이 더욱 불규칙적이고, 넓게 분포하였다. 이러한 현상은 막의 두께가 매우 얇기 때문에 두께 방향으로 형성된 강한 반자장의 영향에 의해 나타나는 것으로 여겨진다. Edge domain이 더 많은 직사각형 모양의 경우 자화반전이 일어나는 동안 자기모멘트의 세차 운동에 의해 생기는 $M_z$ 성분, 즉 두께방향으로 형성된 반자장이 더 작고, 이에 따라 자화 반전이 예상되는 영역에서 자화 반전이 일어나지 않는 비정상적인 자화 반전 영역이 더 적어짐을 확인하였다. 본 시뮬레이션 결과는 자성박막의 안정된 고속 자화반전을 위해서는 반자장의 영향을 최소화하는 것이 중요하다는 것을 보여준다.