• 대한전자공학회논문지TC
• /
• 제43권3호
• /
• pp.27-31
• /
• 2006

Millimeter over Fiber (MMoF) 기법은 저손실로 장거리에 신호를 전송하기 위하여 밀리미터 대역의 신호를 광학적으로 변조하여 광섬유에 실어서 전송하는 기법이다. 이때 광학적 변조 기법으로는 색 분산(chromatic dispersion)이 적고 대역폭 효율이 뛰어난 광학적 단측파대 변조 (Optical Single sideband; OSSB) 방식이 주로 사용된다. OSSB를 사용하는 MMoF 시스템의 광학 연결부는 비선형 증폭기로 취급될 수 있으며, 그것의 AM/AM 특성 함수는 제 1차 제 1종 베셀 함수이다. 본 논문에서는 이를 고려한 OFDM MMoF 시스템의 성능을 알아보았다. 우리는 OFDM MMoF 시스템의 비선형 왜곡 잡음 전력을 추정하여 이론적인 비트 오율(Bit Error Rate; BER)을 분석하였으며, 모의실험을 통해 이를 검증하였다.

• 제어로봇시스템학회논문지
• /
• 제6권1호
• /
• pp.51-56
• /
• 2000

This paper presents the characteristics of the dynamic response and calibration technique on a linear variable differential transformer(LVDT). The linear error of the LVDT was proven $\pm$1% in the static calibration and $\pm$0.5% in the dynamic calibration. In this paper, the linearity error generated in the static and dynamic state of the core movement can be eliminated using the correction algorithem of the static and dynamic state derived from the least square linear approximation for the nonlinearity of the curves of direct data fitting and Lagrange polynomials. With the static and dynamic calibration method, the calibration accuracy of the LVDT can be reduced to within $\pm{0.5%.}$.

• 한국방재학회 논문집
• /
• 제1권1호
• /
• pp.103-115
• /
• 2001

현재 소규모 유역에서의 수공구조물의 설계시 확률강우강도식을 사용하여 강우량을 산정하는 것이 일반적인 적용방법으로 이용되어지고있다. 확률강우의 산정은 그 자체로서 불확실성을 많이 내포하고 있으나 현실적으로 강우의 비선형성을 해석함에 있어 단순화는 배제 할 수 없는 필요사항이다. 따라서 본 연구에서는 확률강우량 산정을 위한 강우강도식의 산정에 있어서 그 비선형성을 잘 모의할 수 있는 방법에 관하여 연구하여 보았다. 연구결과에 의하면 유전자 알고리즘이 시산법이나 비선형계획법의 일종인 Powell 기법에 비하여 더 신뢰성 높은 방법임을 알 수 있었다.

• 대한기계학회논문집
• /
• 제16권4호
• /
• pp.649-657
• /
• 1992

본 연구에서는 스테핑 모터의 토크특성과 전동시스템의 미스얼라인 먼트에 의 한 플리편심을 고려하여 스페핑 모터 구동 타이밍벨트 전동시스템의 전동오차에 관한 이론 및 실험적 연구를 수행하고, 전동오차 감소를 위한 설계 개선 기초자료를 얻고자 한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.201-204
• /
• 2000

In this paper, an A/D converter is implemented to obtain 8bit resolution at a conversion rate of 10Msample/s. This architecture is proposed using the 2-step architecture for high speed conversion rate. It is consisted of sample/hold circuit, low power comparator, voltage reference circuit and DAC of binary weighted capacitor array. Proposed A/D converter is designed using 0.2$\mu\textrm{m}$ CMOS technology. The SNR is 45.3dB at a sampling rate of 10MHz with 1.95MHz sine input signal. When an 8bit 10Msample/s A/D converter is simulated, the Differential Nonlinearity / Integral Nonlinearity (DNL/ INL) error are ${\pm}$1 / ${\pm}$2 LSB, respectively. The power consumption is 13㎽ at single +2.5V supply voltage.

• 한국자동차공학회논문집
• /
• 제8권4호
• /
• pp.85-92
• /
• 2000

The pulsating pressure waves are composed of fundamental frequency and higher order harmonics in exhaust pipe of engines. The nonlinearity in exhaust pipe is caused by their interactions. The error which is between prediction and measurement is induced by the nonlinearity. We can not explain this phenomenon using linear acoustic theory which is existing theory. So power spectrum which was used in linear theory is not useful. Bispectrum and bicoherence functions which are a higher order spectrum are applicable to explain this phenomenon. This paper proposes a nonlinear effect of pulsating pressure waves. The phenomenon proposed here is identified by using of higher order spectrum density functions.

• 대한기계학회논문집A
• /
• 제26권2호
• /
• pp.254-259
• /
• 2002

A variable air-gap type system is widely used for inductive precision position measurement systems. This type transducer has high sensitivity but lacks a linear measurement range due to structural nonlinearity. Furthermore, as measurement range increases, linearity error is also increased. The alternative is a variable overlap-area type system. The sensitivity of this type is determined by the initial air-gap dimension, keeps the original value and does not deteriorate linearity in spite of the variations of the measuring range.

• Journal of Electrical Engineering and Technology
• /
• 제4권4호
• /
• pp.443-450
• /
• 2009

This paper deals with the design of decentralized controller for load-frequency control of interconnected power systems with superconducting magnetic energy storage units and Governor Dead Band Nonlinearity using Multi-Objective Evolutionary Algorithm. The superconducting magnetic energy storage unit exhibits favourable damping effects by suppressing the frequency oscillations as well as stabilizing the inter-area oscillations effectively. The proposed control strategy is mainly based on a compromise between Integral Squared Error and Maximum Stability Margin criteria. Analysis on a two-area interconnected thermal power system reveals that the proposed controller improves the dynamic performance of the system and guarantees good closed-loop stability even in the presence of nonlinearities and with parameter changes.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.558-563
• /
• 1992

In this paper an identification of nonlinear continuous systems by using neural network is considered. The nonlinear continuous system is identified by two steps. At first, a linear approximate model of the continuous system with nonlinearity is obtained by IIR filtering approach. Then the modeling error due to the nonlinearity is reduced by a neural network compensator. The teaching signals to train the neural network is gotten by smoothing the measurement data corrupted by noise. An illustrative example is given to demonstrate the effectiveness of the proposed approach.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.263-266
• /
• 1999

In this work, a A/D converter is implemented to obtain 8bit resolution at a conversion rate of 10MS/s for video applications. This architecture is proposed using the Pipelined architecture for high speed conversion rate and the Successive - Approximation architecture for low power consumption, and consists of two identical stages that consist of sample/hold circuit, low power comparator, voltage reference circuit and MDAC of binary weighted capacitor array. Proposed A/D converter is designed using 0.25${\mu}{\textrm}{m}$ CMOS technology The SNR is 80㏈ at a sampling rate of 10MHz with 1.95MHz sine input signal. When an 8bit 10MS/s A/D converter is simulated, the Differential Nonlinearity / Integral Nonlinearity (DNL/ INL) error are $\pm$0.5 / $\pm$2 LSB, respectively. The power consumption is 13㎽ at 10MS/s.