• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2007년도 학술발표회 논문집
• /
• pp.471-472
• /
• 2007

See Full Text

• 한국결정성장학회지
• /
• 제20권1호
• /
• pp.58-63
• /
• 2010

화력 발전소에서 발생하는 석탄 바닥재에 $Na_2O$와 $Li_2O$가 첨가된 결정화 유리를 제조하고, 비등온 열분석법을 이용하여 결정성장 거동을 분석하였다. 온도에 따른 결정화 분율 및 결정화 속도 변화를 계산한 결과, 결정화가 50% 진행된 온도는 DTA 상의 결정 발열피크 $T_p$ 보다 약간 높게 나타났으며, 결정화가 가장 빠르게 진행되는 온도는 $T_p$와 거의 일치함을 알 수 있었다. Kissinger 식을 이용하여 결정화 활성화 에너지(262 kJ/mol), Avrami 상수 (1.7) 그리고 진동수 ($5.7{\times}10^{16}/s$)를 계산하였으며, 이로부터 nepheline 결정 성장은 주로 1~2 차원적 표면 결정화 경향을 보이지만, 동시에 내부 결정화도 어느 정도 나타날 것으로 예측되었다. 실제 미세구조 관찰에서 수지(dendrite)상의 표면 결정화가 상당히 일어났고 동시에 낮은 분율의 내부 결정도 생성된 것이 확인되어, Kissinger식에 의해 예측된 결과가 본 연구에서 제조된 결정화 유리의 거동과 일치함을 알 수 있었다.

• 한국세라믹학회지
• /
• 제32권12호
• /
• pp.1331-1336
• /
• 1995

The glass-ceramics for ferro-electric were made from compositions of 70PbO.16TiO2.8SiO2.4B2O3.2AlPO4 (wt%) and 67.5PbO.20TiO2.8.5SiO2.2B2O3.2AlPO4 (wt%). The crystallization kinetics for PbTiO3 crystalline phase formation from glass was studied using non-isothermal DSC techniques. The values of activation energy, ΔE using variables of heating rate and temperature were calculated at various reaction fractions obtained from peak area over DSC. The results indicated that activation energy was lowest at 60% reaction fractions and the activation energy of glass containing 20.0 wt% TiO2 is higher than that of glass containing 16.0 wt% TiO2. The crystallization mechanism was three dimensional growth (n=4).

• Bulletin of the Korean Chemical Society
• /
• 제32권7호
• /
• pp.2369-2376
• /
• 2011

Effect of heat treatment of carbon nanofibers (CNF) on electrical properties and crystallization behavior of polypropylene was reported. Two types of CNFs (untreated and heat treated at 2300 $^{\circ}C$) were incorporated into polypropylene (PP) using intensive mixing. A significant drop in volume resistivity was observed with composites containing untreated 5 wt % and heat treated 3 wt % CNF. In non-isothermal crystallization studies, both untreated and heat treated CNFs acted as nucleating agents. Composites with heat treated CNFs showed a higher crystallization temperature than composites with untreated CNFs did. TEM results of CNF revealed that an irregular structure of CNFs can be converted into the continuous graphitic structure after heat treatment. Furthermore, STM showed that the higher carbonization temperature leads to the higher graphite degree which presents the larger carbon network size, suggesting that a more graphitic structure of CNFs led to a higher crystallization temperature of PP.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 가을 학술발표회 논문집
• /
• pp.243-246
• /
• 2001

열가소성 고무탄성체인 폴리에테르에스테르계 고분자는 결정에 의한 물리적 가교를 형성할 수 있는 하드세그멘트 블록과 비결정성의 소프트세그멘트 블록으로 구성되어 탄성을 발현하는 성질을 갖는다. 이때 하드세그멘트의 함량의 변화는 고분자의 결정화 특성을 변화시켜 최종단계에서의 물성에 큰 영향을 미친다. 본 연구에서는 하드세그멘트가 PBT 구조로 이루어지고 소프트세그멘트는 PTMGT 구조를 갖는 4GT/PTMGT 고분자의 결정화 거동을 분석하였다. (중략)

• Korean Chemical Engineering Research
• /
• 제49권5호
• /
• pp.611-616
• /
• 2011

본 연구에서는 무배향 PLA 필름의 어닐링(annealing) 단계를 통하여 온도별 PLA 필름의 avrami 결정화 속도식을 도출하고 결정화 속도상수(k)를 비교함으로써 최적화된 어닐링 온도를 제안하였다. 120, 130, $140^{\circ}C$ 온도에서 결정화된 필름의 결정화 속도상수(k)는 각각 1.64, 1.68, 1.26이었다. 필름표면에 대한 어닐링은 필름의 표면조도와 동마찰계수에 영향을 주는데 80, 110, 120, 130, $140^{\circ}C$의 온도조건에서 표면조도(Ra)는 각각 0.006, 0.009, 0.015, 0.027, 0.029 ${\mu}m$로 높아졌고 동마찰계수(${\mu}_k$)는 0.45, 0.43, 0.33, 0.31, 0.27로 낮아졌다. 탈크를 1, 3, 5 wt%씩 첨가하는 경우 PLA 필름의 결정화 속도상수(k)는 0.58, 0.46, 0.39로 낮아졌다.

• Carbon letters
• /
• 제15권1호
• /
• pp.50-56
• /
• 2014

We prepared ethylene vinyl alcohol (EVOH)/graphene oxide (GO) membranes by solution casting method. X-ray diffraction analysis showed that GOs were fully exfoliated in the EVOH/GO membrane. The glass transition temperatures of EVOH were increased by adding GOs into EVOH. The melting temperatures of EVOH/GO composites were decreased by adding GOs into EVOH, indicating that GOs may inhibit the crystallization of EVOH during non-isothermal crystallization. However, the equilibrium melting temperatures of EVOH were not changed by adding GOs into EVOH. The oxygen permeability of the EVOH/GO (0.3 wt%) film was reduced to 63% of that of pure EVOH film, with 84% light transmittance at 550 nm. The EVOH/GO membranes exhibited 100 times better (water vapor)/(oxygen) selectivity performance than pure EVOH membrane.

• Journal of Ceramic Processing Research
• /
• 제20권1호
• /
• pp.63-68
• /
• 2019

We investigated the effects of Al2O3 addition on (1-x)Li2B4O7-xAl2O3 (LBAO; x = 0, 0.005, 0.01, 0.05, 0.07, and 0.1) glasses. The glasses were synthesized by a conventional melt-quench method. Structural transformations of the LBAO glasses were assessed via X-ray diffraction analysis. Estimations of ΔT, KGS = (Tc-Tg)/(Tm-Tc), activation energy, and the Avrami parameter were performed using differential thermal analysis and differential scanning calorimetry. An interpretation of non-isothermal kinetics of the crystallization process is presented using the modified Ozawa equation. The activation energy E increased from 3.3 to 3.5 eV for the LBAO (x < 0.01) glasses whereas those of the LBAO (x > 0.05) glasses slightly increased from 3.75 to 4.05 eV. The exponent n was estimated to be 3.9 ± 0.1 for the LBAO (x < 0.01) glasses and 3.2 ± 0.02 for the LBAO (x > 0.05) glasses. Microstructural characterization of the glassy and crystalline phases using atomic force microscopy was investigated. The effects of Al2O3 on the LBAO glasses include a decreased nucleation rate in the crystallization process and a significantly reduced crystal size.

• 열처리공학회지
• /
• 제8권3호
• /
• pp.236-243
• /
• 1995

Since amorphous alloys have been known to have better mechanical and chemical properties than crystalline alloys of the same composition, a great number of studies on the formation of Al-based amorphous alloys have been carried out actively. However, little has been obtained about the effect of Rare-Earth metal and Transition metal addition on amorphous phase formed by melt spinning method. This study included fabrication of amorphous alloy $Al_{85}Ce_5Ni_{10}$ by melt spinning methods and DTA, XRD, TEM analysis to determine crystalization behavoir. Annealing treatments were carried out in Ar atmosphere under isothermal and nonisothermal conditions. The diffraction pattern of non-heated ribbons showed broad form characteristic of glass metallic alloy. The crystallization of amorphous $Al_{85}Ce_5Ni_{10}$ takes place eutedtoidly by homogeneous formation of Al and MS-1, followed by precipitation of the $Al_{11}Ce_3$ and later $MS-1{\rightarrow}Al_3Ni$ transformation.

• 마이크로전자및패키징학회지
• /
• 제12권2호
• /
• pp.141-147
• /
• 2005

나노재료 $TiO_2-SiO_2$는 2-prOH(2-propanol)를 용매로 사용하여 가수분해와 축합반응으로 제조하였고, FT-IR, DSC, XRD, FE-SEM을 사용하여 $TiO_2-SiO_2$의 특성을 조사하였다. FT-IR분석으로부터 Ti-0-Si의 흡수피크에 대해 설명하였으며, DSC분석 결과를 Ozawa 방정식에 적용하여, 결정화에 필요한 활성화 에너지를 계산하였다. 결정학적 특징은 XRD를 이용하여 하소 온도의 변화에 따른 시료의 회절패턴과 반가폭의 변화 등에 관련하여 설명하였다. FE-SEM을 통하여 Ti mol$\%$가 증가할수록 입자크기가 커지는 것을 확인 할 수 있었다.