• Macromolecular Research
• /
• v.15 no.6
• /
• pp.498-505
• /
• 2007

This study demonstrated the in-situ functionalization with polymers of multi-walled carbon nanotubes (MWNTs) via emulsion polymerization. Polystyrene-functionalized MWNTs were prepared in an aqueous solution containing styrene monomer, non-ionic surfactant and a cationic coupling agent ([2-(methacryloyloxy)ethyl]trime-thylammonium chloride (MATMAC)). This process produced an interesting morphology in which the MWNTs, consisting of bead-string shapes or MWNTs embedded in the beads, when polymer beads were sufficiently large, produced nanohybrid material. This morphology was attributed to the interaction between the cationic coupling agent and the nanotube surface which induced polymerization within the hemimicellar or hemicylindrical structures of surfactant micelles on the surface of the nanotubes. In a solution containing MATMAC alone without surfactant, carbon nanotubes (CNTs) were not well-dispersed, and in a solution containing only surfactant without MATMAC, polymeric beads were synthesized in isolation from CNTs and continued to exist separately. The incorporation of MATMAC and surfactant together enabled large amounts of CNTs (> 0.05 wt%) to be well-dispersed in water and very effectively encapsulated by polymer chains. This method could be applied to other well-dispersed CNT solutions containing amphiphilic molecules, regardless of the type (i.e., anionic, cationic or nonionic). In this way, the solubility and dispersion of nanotubes could be increased in a solvent or polymer matrix. By enhancing the interfacial adhesion, this method might also contribute to the improved dispersion of nanotubes in a polymer matrix and thus the creation of superior polymer nanocomposites.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.602-611
• /
• 2013

We have investigated the influence of system composition and preparation conditions on the particle size of vitamin E acetate (VE)-loaded nanoemulsions prepared by PIC(phase inversion composition) emulsification. This method relies on the formation of very fine oil droplets when water is added to oil/surfactant mixture. The oil-to-emulsion ratio content was kept constant (5 wt.%) while the surfactant-to-oil ratio (%SOR) was varied from 50 to 200 %. Oil phase composition (vitamin E to medium chain ester ratio, %VOR) had an effect on particle size, with the smallest droplets being formed below 60 % of VOR. Food-grade non-ionic surfactants (Tween 80 and Span 80) were used as an emulsifier. The effect of f on the droplet size distribution has been studied. In our system, the droplet volume fraction, given by the oil volume fraction plus the surfactant volume fraction, was varied from 0.1 to 0.3. The droplet diameter remains less than 350 nm when O/S is fixed at 1:1. The droplet size increases gradually as the increasing the volume fraction. Particle size could also be reduced by increasing the temperature when water was added to oil/surfactant mixture. By optimizing system composition and homogenization conditions we were able to form VE-loaded nanoemulsions with small mean droplet diameters (d < 50 nm). The PIC emulsification method therefore has great potential for forming nanoemulsion-based delivery systems for food, personal care, and pharmaceutical applications.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.6
• /
• pp.340-348
• /
• 2015

Removal efficiency of PCBs in contaminated marine sediments treated by Fenton-like oxidation combined with surfactant was investigated in this research in order to achieve remediation of PCBs. A washing treatment using various concentrations of hydrogen peroxide (1% and 15%) and surfactants (Triton X-100, Tween 60 and Tween 80) was evaluated at various conditions in laboratory scale experiments. The mean removal efficiencies of tPCBs varied from 24.1 to 46.7% in the sediments for 1 hour duration of the treatments. The concentration of tPCBs in contaminated marine sediments after the simultaneous treatment with hydrogen peroxide and surfactant satisfied the domestic environmental standards for the beneficial use of sediments. When suitable surfactant was used for Fenton-like oxidation, the removal efficiency of tPCBs at low concentration of hydrogen peroxide was similar to that at high hydrogen peroxide concentration. Thus the efficient removal of PCBs in contaminated marine sediments could be achieved through treatment with Fenton-like oxidation combined with surfactant washing.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1031-1037
• /
• 2018

The formation of a complex between PVP or HPC and iodine was indicated by a red shift in the tri-iode band while PVA-iodine complex showed its characterized band around 500 nm in pure aqueous media. Addition of surfactant SDS resulted in a disapperance of the characteristic blue color of the PVA-iodine complex indicating that the complex is not formed in aqueous surfactant media. However in case of PVP or HPC, presence of the monomers of SDS favored the complex formation but in higher concentration, the micelles of SDS decreased the complex. Complexation was found to increase with increasing content of n-propanol in the system since n-propanol inhibits the formation of gels or microgels in the polymer solution. But in case of PVA-iodine complex, addition of n-propanol led to conversion of bigger polyiodides into smaller ones, which is indicative of increased intermolecular hydrogen bond interaction between propanol and PVA effecting a decrease in the PVA aggregate space.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.9
• /
• pp.1397-1401
• /
• 2007

An in situ experiment was conducted to find out whether Tween 80 improves rice straw digestion through increased adhesion of major fibrolytic bacteria. Rice straw was sprayed with various levels of Tween 80 non-ionic surfactant or SDS ionic surfactant 24 h before incubation in the rumen of Holstein steers. Dry matter (DM) disappearance and adhesion of F. succinogenes, R. flavefaciens and R. albus on rice straw after in situ incubation were measured by real-time PCR. Application of Tween 80 increased DM disappearance, which was more noticeable at an application level of 1% compared to lower application levels. Application of SDS resulted in an opposite response in DM disappearance with highest reduction in DM disappearance at 1% level. In a subsequent in situ experiment, higher Tween 80 was applied to rice straw in an attempt to find the optimum application level. Tween 80 at 2.5% gave better DM disappearance than 1% with a similar result at 5%. Therefore, an adhesion study was carried out using rice straw treated with 2.5% Tween 80. Our results indicated that Tween 80 reduced adhesion of all three major rumen fibrolytic bacteria to rice straw. Present data clearly show that improved DM disappearance by Tween 80 is not due to increased bacterial adhesion onto substrates.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.6
• /
• pp.670-677
• /
• 2007

The stability of CGAs(colloidal gas aphrons) prepared from non-ionic and ionic surfactants was investigated. Those surfactants were sodium dodecyl sulfate(SDS), Triton X-100, Tween 80 and Quillaja Saponin. The stability of CGAs prepared from single surfactants or mixed surfactants(two components) using a CGA generate. was investigated as functions of temperature, surfactant concentration and stirring time. Saponin among the single surfactants has shown the longest duration time(143 min) and then, Triton X-100, SDS, and Tween 80 were followed by at room temperature. In case of CGAs heated up to $70^{\circ}C$, SDS endured for 116 min but Saponin lasted for only 105 mit which was a considerable reduction of the duration time of CGAs at room temperature. For mixed surfactant pairs, stability of any one pairs stood between the two. That meant no synergic effect for surfactant blending. At the higher temperature, Saponin+Triton X-100 was disclosed to be the lowest, 53 min meanwhile Saponin+SDS was the highest at ambient temperature. The CGAs, initially about 140 ${\mu}m$ in diameter, began to grow right after the agitation to be about 190 ${\mu}m$ owing to coalescence of the bubbles and then became to collapse. When heated, CGAs including Saponin tended to be smaller while the others to be larger. In summary, we found that the stability of CGAs or the duration time was greater for single surfactants and at room temperature rather than for mixed surfactants that caused substantial intermolecular interactions in the CGA structure and at the higher temperature.

• The Plant Pathology Journal
• /
• v.22 no.3
• /
• pp.303-308
• /
• 2006

Ethaboxam is a fungicide controlling plant diseases caused by Oomycetes. Efforts were made to improve its fungicidal activity applying formulation technology. Fungicidal activity of ethaboxam against cucumber downy mildew caused by Pseudoperonospora cubensis was improved by incorporating polyoxyethylene cetyl ether (PCE) in a wettable powder formulation. It was found that the optimum combination ratio of PCE and ethaboxam was 3:1, and a tank-mix of $150{\mu}g/ml$ of ethaboxam and $450{\mu}g/ml$ of PCE would be as good as the standard 25 % WP formulation diluted to $250{\mu}g/ml$ ethaboxam without PCE in controlling cucumber downy mildew. Based on this results, a wettable powder (WP) co-formulation containing 15% of ethaboxam and 45% of PCE was developed in this study, and tested for its performance in the fields. This co-formulation showed significant improvement in persistence of fungicidal activity and curative efficacy of ethaboxam against cucumber downy mildew. The improved control efficacy was also confirmed for control of grape downy mildew caused by Plasmopara viticola and potato late blight caused by Phytophthora infestans in the field tests.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.4
• /
• pp.31-37
• /
• 2011

The feasibility study of soil flushing was investigated to remediate lubricant oil and zinc contaminated railway soil. In this study, mixed washing agents of surfactant and inorganic acid/base were used for the simultaneous removal. The mixed washing agent of non-ionic surfactant and HCl removed 15% of the lubricant oil and 40% of zinc, respectively. Alkaline-enhanced soil washing process increased the removal of lubricant oil up to 40%. This is because alkaline solution reduced the interfacial tension between water phase and lubricant oil phase due to the soap formation reaction. To simulate in-situ soil flushing for the remediation of railroad-related contamination, two dimensional soil flushing was carried out based on the results of batch soil washing. In the soil flushing, the removal efficiencies of lubricant oil and zinc were 34% and 16%, respectively. Even though the removal efficiency was low, the mixed washing agent can remove metal and lubricant oil simultaneously.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1229-1235
• /
• 2007

Railway-contaminated soil is categorized by total petroleum hydrocarbon(TPH)-related contamination and heavy-metal contamination. The sources of TPH are diesel and lubricant. In this study, the feasibility of soil washing, chemical oxidation and ultra-sonication were investigated to treat lubricant-contaminated railway soil. tergitol, a non-ionic surfactant, was investigated as a washing agent. However, it is not effective to remove lubricant from soil even though tergitol is most effective washing agent for diesel-contaminated soil. Addition of alcohols with surfactant enhanced slightly washing efficiency of the lubricant-contaminated soil. To remediate railway-contaminated soil, source of pollution should be considered.

• YAKHAK HOEJI
• /
• v.39 no.5
• /
• pp.495-505
• /
• 1995

The O/W microemulsion systems were made from 2 or 4% (w/w) oil (soybean oil, olive oil or isopropyl myristate) and 10, 15 or 20% (w/w) Brij 96. They were compared with micellar solution of equivalent surfactant concentration m therms of physicochemical properties, and the solubilization of sudan IV. They were characterized by dynamic light scattering, stability, surface tension, viscosity and rheogram. The mean diameters of O/W microemulsion systems were 10-15nm, and those of Brij 96 micellar solutions were 18-19 nm. Both of them were monodisperse systems. The O/W microemulsion systems showed Newtonian flow and their apparent viscosities were lower than those of micellar solutions. The surface tensions of O/W microemulsion systems were increased or decreased depending on the types of oil used, when compared with those of micellar solutions. The O/W microemulsion systems were very stable, and did not show any flocculation or aggregation. Their mean diameters were not changed after three months. But oxidation was observed in microemulsions without nitrogen gas at high temperature. There was a significant improvement in the sudan IV solubffimtion in micromulsion compared with that m the micellar solution containing equivalent concentration of surfactant. The size distribution and mean diameters of O/W micromulsions were not changed when sudan IV was solubilized.