• Journal of Microbiology and Biotechnology
• /
• 제20권11호
• /
• pp.1592-1596
• /
• 2010

To verify the dominance of microorganisms in wastewater biological treatment, PCR-DGGE (denaturing gradient gel electrophoresis) was performed as a supplementary support method for screening of the dominant microorganisms from activated sludge. Results suggest that the dominant microorganisms in activated sludge are primarily responsible for strengthening its effectiveness as a biological treatment system, followed by the non-main dominant microorganisms, whereas the non-dominant microorganisms showed no effects. The degree of microbial abundance present on the profile of PCR-DGGE was in line with the treatment efficiency of augmented activated sludge with isolated cultures, suggesting that PCR-DGGE can be used as an effective supplementary method for verifying culturable dominant microorganisms in activated sludge of coking wastewater.

• 한국안전학회지
• /
• 제31권2호
• /
• pp.112-118
• /
• 2016

The labor force has moved to services industry. An industrial accidents of service industry is three people on 10 persons in 2013. This research conducted questionnaire surveys of 1:1 directly person interviews with a structured questionnaire intended for 150 service workplaces, in order to improve occupational safety and health in very small service workplace with less than 5 employee. The survey contents is employment type, safety and health management system, safety and health training, activities. In the results, working with non-regular(informal) workers is two people on 10 persons 27.1% and female workers is about five people on 10 persons with 58.1%, and that 67.9% of non-regular workers who are mainly engaged in the production line appeared. And the work-related injury and accident experience was 3.3% and the occupational injury rate was 1.02%, especially occupational injury rate of female workers was 0.88%. Workplace risk assessment carried out in response that it was very low as 10.0% of the total. Also the safety & health education and activities was very low. Thus the safety consciousness and education is urgently required in order to prevent the industrial accidents.

• 디지털산업정보학회논문지
• /
• 제8권4호
• /
• pp.231-244
• /
• 2012

The purpose of this study was to substantially analyze the relation between the success factors of quality management and performance. For this purpose, the success factors of quality management - CEO's leadership, customer-centeredness, process management, training, full participation of employees, and relationship with vendors - were identified as independent variables and performance was identified as dependent variable to substantially analyze the automotive parts industry. In result, the findings can be summarized into the following: First, for the relation between the success factors of quality management and financial performance, CEO's leadership, customer-centeredness, training, and full participation of employees were statistically significant, but process management and relationship with vendors were not statistically significant. Second, for the relation between the success factors of quality management and non-financial performance, CEO's leadership, customer-centeredness, full participation of employees, and relationship with vendors were statistically significant, but process management and training were not statistically significant. Third, it was also found that, among the success factors of quality management, CEO's leadership, customer-centeredness, full participation of employee should be considered more than any other variables to achieve performance. Based on the above findings, it was concluded that 'CEO's leadership' and 'customer-centeredness' had an influence on both financial and non-financial performances and were relatively more influential than other individual factors.

• 한국의류산업학회지
• /
• 제24권6호
• /
• pp.686-693
• /
• 2022

The rapid development of the fashion industry in contemporary society has also caused various problems such as environmental pollution, material excess, and spiritual poverty. Accordingly, traditional Chinese Taoist aesthetics can solve the spiritual poverty that people are facing today, and the spiritual pursuit of returning to innocence. This study focuses on the works of first generation Chinese designer Ma Ke as an example to discuss the embodiment and application of Taoist aesthetics. The results are as follows: First, Ma Ke's works emphasize the value of handicraft through traditional handcrafting and natural fibers, which reflect the beauty of simplicity and the non-action of Taoist aesthetics. Second, the works acknowledge nature by using natural materials and retaining their original appearance, which embodies Taoist aesthetics of the beauty in non-action and living in harmony with nature. Third, the collections reflect a critical attitude toward the fashion industry and consumer culture by rethinking consumerism and advocating environmental protection, thus propagating the beauty in simplicity and the harmonious life with nature in Taoism aesthetics. In conclusion, Ma Ke's designs incorporating sustainability and handicraft exhibit the core features of Taoist aesthetics, including the beauty in simplicity, non-action, and living in harmony with nature while exploring the relationship between modernity and tradition, man and nature, and handicraft and fashion. This research can contribute to understanding Ma Ke's works in promoting critical thinking about the fashion industry through Taoist aesthetics.

• 한국산업융합학회 논문집
• /
• 제25권2_2호
• /
• pp.199-208
• /
• 2022

The steel wire or steel bar processing process applied to the manufacture of various bolts and power transmission shafts was improved by applying in-line phosphate film treatment technology. By applying a polymer lubricant for a non-reactive metal forming process and a non-reactive non-phosphorus lubricating coating agent, the film formation for each process time was comparatively analyzed and reviewed. Compared to the nine processes applied previously, the in-line phosphate film treatment technology applied with only two processes has been effectively improved in terms of reduction of treatment time, reduction of facility installation area, prevention of water pollution due to wastewater, and non-use of ozone-depleting substances. In addition, it was found that it can have an important effect on productivity improvement and price competitiveness from the simplification of quality control and process control as well as improvement of the working environment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.101-102
• /
• 2010

This paper represents about the characteristics of wind turbine industry of the west-south seashore of Leading Industry Development for Honam Economic Region. These projects have 8 R&D and 3 non R&D project. The period of these projects is from October 2009 to April 2012. The R&D projects are composed three bright prospect products (1) the base construction of MW off-shore wind turbine components and system with Outer-rotor type PMSG, (2) the Development of 3MW wind power system with accommodation of the west-south seashore, and (3) the development of hybrid wind turbine system with wind base construction. Also, the non-R&D projects are composed three parts with above three bright prospect products. Above two projects support the companies with characteristic of low speed wind turbine system. Other project supports the companies related to wind turbine with small and medium capacity of form 3 kW to 10kW.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.884-887
• /
• 2000

In the present industry, there is not only the cutting of iron metal, but also the cutting of alloy aluminum, brass and plastic to wood(Paulownia). A variety of material is used and these industry is made need of the cutting material but lots of experiments processing is not enough at the moment. At this point, our team processed the basic experiment about influencing of Feedrate and Backrake angle of bite concerned to manufacture in the turning of non-iron metal. Generally speaking, we recognized that there was occurrence of increase of Surface Roughness with increasing of cutting angle in the non-iron metal, but in the cutting of wood we knew, there was special change with change of cutting angle

• 한국산업융합학회 논문집
• /
• 제4권3호
• /
• pp.329-337
• /
• 2001

This simulator is developed for the analysis of a MOSFET based on Thermally Coupled Energy Transport Model(TCETM). The simulator has the ability to calculate not only stationary characteristics but also non - stationary characteristics of a MOSFET. It solves basic semiconductor devices equations including Possion equation, current continuity equations for electrons and holes, energy balance equation for electrons and heat flow equation, using finite difference method. The conventional semiconductor device simulation technique, based on the Drift-Diffusion Model (DDM), neglects the thermal and other energy-related properties of a miniaturized device. I, therefore, developed a simulator based on the Thermally Coupled Energy Transport Model (TCETM) which treats not only steady-state but also transient phenomena of such a small-size MOSFET. In particular, the present paper investigates the breakdown characteristics in transient conditions. As a result, we found that the breakdown voltage has been largely underestimated by the DDM in transient conditions.

• 디지털산업정보학회논문지
• /
• 제16권3호
• /
• pp.49-58
• /
• 2020

Image interpolation, a technology that converts low resolution images into high resolution images, has been widely used in various image processing fields such as CCTV, web-cam, and medical imaging. This technique is based on the fact that the statistical distributions of the white Gaussian noise and the difference between the interpolated image and the original image is similar to each other. The proposed algorithm is composed of three steps. In first, the interpolated image is derived by random image interpolation. In second, we derive weighting functions that are used to apply non-local mean filtering. In the final step, the prediction error is corrected by performing non-local mean filtering by applying the selected weighting function. It can be considered as a post-processing algorithm to further reduce the prediction error after applying an arbitrary image interpolation algorithm. Simulation results show that the proposed method yields reasonable performance.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.178-179
• /
• 2019

The cement industry is a large amount of carbon dioxide emission industry, and research and development on non-cement composition is underway at the time when the absolute reduction of cement use is urgently needed. In addition, limestone fine powder is a by-product and is required to be recycled in terms of resource circulation. The compressive strength of the lime cement powder added noncement composition showed that the compressive strength increased as the limestone powder was added. It is believed that limestone fine powder played a role of stimulant such as alkali activator in non-cement composition.