• 한국소음진동공학회논문집
• /
• 제24권9호
• /
• pp.695-705
• /
• 2014

In this paper, two types of techniques for the prediction of radiated sound pressure due to vibration of a structure are investigated. The prediction performance using wave-number sensing technique is compared to that of conventional prediction method, such as Rayleigh's integral method, for the prediction of far-field radiated sound pressure. For a coupled plate, wave-number components are predicted by the vibration response of plate and the prediction performance of far-field sound is verified. In addition, the applicability of distributed sensors that are not allowable to Rayleigh's integral method is considered and these can replace point sensors. Experimental implementation verified the prediction accuracy of far-field sound radiation by the wave-number sensing technique. Prediction results from the technique are as good as those of Rayleigh's integral method and with distributed sensors, more reduced computation time is expected. To predict the radiated sound by the efficient configuration of structural sensors, composed(synthesized) mode considering sound power contribution is determined and from this size and location of sensors are chosen. Four types of sensor configuration are suggested, simulated and compared.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1386-1392
• /
• 2000

This paper presents a new prediction method of radiated noise from grille of the airconditioning appliance. Laminar vortex sheddings behind a circular cylinder are simulated by solving two dimensional unsteady incompressible Navier-Stokes equation. The Finite Elements Method(FEM) and unstructured grid generation technique are applied to solve, the unsteady lift/drag coefficients are obtained to compute far-field noise using Lighthill's acoustic analogy. Grille is divided into some cylinder segments, and radiated noise from grille is obtained by summing noise generated from each segment. The effects of changing cross section of cylinder and grille geometry are studied. And sound pressure levels radiated from typical H-type grille are measured in KAIST anechoic wind tunnel at various inflow conditions and compared with numerical predictions.

• 한국음향학회지
• /
• 제21권8호
• /
• pp.703-707
• /
• 2002

새로운 콘트롤 밸브 소음 예측 방법을 제안하고 밸브 및 배관으로 이루어진 시스템에 적용하여 그 가능성을 할인하였다. 기존의 소음 예측 방법은 무향실을 이용하는 기존의 예측방법보다 일반 산업체에서 시험 시설을 설치하기가 용이한 장점이 있다. 측정된 음향파워를 이용하여 소음예측식을 결정하고 상대유량계수 0.11인 경우 소음예측식에 따라 유량 및 차압의 변화에 따른 음향파워레벨을 평가하였고 그 결과가 측정값과 잘 일치함을 확인하였다. 제안된 밸브소음 예측기법은 콘트롤밸브의 소음특성을 나타내는 지표로서 사용할 수 있다.

• 한국소음진동공학회논문집
• /
• 제12권6호
• /
• pp.405-412
• /
• 2002

Recently, regulations of the government and concerns of people give rise to the interest in exhaust and intake noise of passenger car as much as other vehicles. In these demands, performance prediction software with hybrid method was developed at first. Secondly, robust design was used for improving the noise reduction capacity of intake system with the performance prediction software. On the basis of the existing design, length and radios of each component that was thought to effect on the capacity of intake system was selected. The factors were arranged by using L18 table of orthogonal array and optimum value was obtained.

• 한국소음진동공학회논문집
• /
• 제14권4호
• /
• pp.310-318
• /
• 2004

For many industrial problems originating from aerodynamic noise, noise prediction techniques, reliable and easy to apply, would be of great value to engineers and manufacturers. General algorithm is presented for the prediction of internal flow-induced noise from quick opening throttle valve in an automotive engine. This algorithm is based on the integral formula derived by using the General Green Function, Lighthill's acoustic analogy and Curle's extension of Lighthill's. Novel approach of this algorithm is that the integral formula is so arranged as to predict frequency-domain acoustic signal at any location in a duct by using unsteady flow data in space and time, which can be provided by the Computational Fluid Dynamics Techniques. This semi-analytic model is applied to the prediction of internal aerodynamic noise from a throttle valve in an automotive engine. The predicted noise levels from the throttle valve show good agreement with actual measurements. The results show that the dipole noise is dominant in this phenomena and the origin of noise sources is attributed to the anti-vortex lines formed in the down-stream from a throttle valve. This illustrative computation shows that the current method permits generalized predictions of flow noise generated by bluff bodies and turbulence in flow ducts.

• 한국철도학회논문집
• /
• 제4권2호
• /
• pp.71-77
• /
• 2001

Standardization EMU in comparison with the existing EMU has been largely changed the material and section profile of the structure as the Aluminium made. This study is analytically predicted the influence of inner noise in tunnel running when the above change is made.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.50-55
• /
• 2006

For prediction of railway noise, propagation characteristics must be identified as well as the source characteristics. During the railway noise in outdoor pass the air, various factors affect the propagation. In this study, to suggest more effective and convenient equation to predict railway noise, calculation method for correction factor was investigated.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.740-745
• /
• 1994

In the actual situation of measuring the environmental noise, it is very often that only the resultant phenomenon fluctuation contaminated by the additional noise of arbitrary distribution type can be observed. Furthermore, the observed data is usually given in a sound level form the purpose of estimating only the undisturbed objective output response, some estimation method is necessary to reasonably remove the effect of the above additional noise. In this paper, first, a mathematical model of arbitrary sound insulation systems is introduced in the form of a linear system on intensity scale, by using the well-known additive property of energy quantities. Next, some estimation method of the output response under the existence of background noise is derived. Then, based on the expression of the above estimation method, a new prediction method of only the output response probability function form for arbitrary sound insulation systems without. a background noise is proposed by use of observed data contaminated by a background noise. Finally, the effectiveness of the proposed method is confirmed experimentally too by applying it to the actual various type sound wall systems.

• 한국음향학회지
• /
• 제21권2호
• /
• pp.134-141
• /
• 2002

본 연구에서 곡선 와동 요소와 CVC (Constant Vorticity Contour) 후류 모델이 수평축 풍력 터빈의 공력 성능 및 소음을 예측하기 위해 사용되었다. 또한 2차 회귀에 근거하여 회전수의 예측을 하였다. 광대역 소음을 예측은 경험식에 근거한 방법을 사용하였다. 직선 와동요소 대신에 BCVE (Basic Curved Vortex Element)와 SIVE(Self Induction Vortex Element)를 사용하는 곡선 와동 요소를 사용하였으며 CVC 후류 모델에서 와동의 강도는 블레이드의 스팬방향 및 와동을 따라서 일정하다고 가정하였다. 이렇게 만들어진 자유 후류는 와동 격자를 대치한다. 본 방법은 여타의 방법에 비해 휠씬 적은 계산 시간을 요구하며 후류의 정확한 구조를 모사할 수 있었다. 검증을 위해서는 김준모의 실험과 Zond사의 Z-40FS의 모델을 성능 예측 결과와 WTS-4와 USWP를 소음 예측 결과와 비교하였다. 계산 결과는 실제의 실험치와 잘 일치하는 것으로 나타났다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1490-1493
• /
• 2007

Aerodynamic noise generated from wind turbines is predicted by it's classified source mechanisms using computational method. BPF noise according to the blade passing motion, is modelled on monopole and dipole sources. They are predicted by Farassat 1A equation. Airfoil self noise and turbulence ingestion noise are modelled upon quadrupole sources and are predicted by semi-empirical formulas composed on the groundwork of Brooks et al. and Lowson. Retarded time is considered, not only in low frequency noise prediction but also in turbulence ingestion noise and airfoil self noise prediction. Wind turbine noise emission of a 3MW wind turbine and a 600 kW wind turbine, standing for large and middle sized wind turbines, is analyzed.