• Carbon letters
• /
• 제18권
• /
• pp.62-66
• /
• 2016

• Journal of the Korean Wood Science and Technology
• /
• 제45권2호
• /
• pp.232-242
• /
• 2017

The objective of this study was to examine changes in the porosity and internal structure of wood as it goes through the process of saccharification (extraction of fermentable sugars). This study also examined the use of different drying methods to prepare samples for characterization of internal pores, with particular emphasis on the partially disrupted cell wall. Aspen wood flour samples after dilute acid pretreatment followed by enzymatic hydrolysis were examined for nitrogen adsorption. The resulting isotherms were analyzed for surface area, pore size distribution, and total pore volume. Results showed that freeze drying (with sample pre-freezing) maintains the cell wall structure, allowing for examination of saccharification effects. Acid pretreatment (hemicellulose removal) doubled the surface area and tripled the total volume of pores, which were mostly 10-20 nm wide. Subsequent enzymatic hydrolysis (cellulose removal) caused a 5-fold increase in the surface area and a ~ 11-fold increase in the total volume of pores, which ranged from 5 to 100 nm in width. These results indicate that nitrogen adsorption analysis is a feasible technique to examine the internal pore structure of lignocellulosic residues after saccharification. The information on the pore structure will be useful when considering value-adding options for utilizing the solid waste for biofuel production.

• Applied Biological Chemistry
• /
• 제41권4호
• /
• pp.209-212
• /
• 1998

Methylan, a polysaccharide produced from Methylobacterium organophilum, was chemically modified by adding diethylaminoethyl (DEAE) group to the backbone of methylan. The structure of DEAE-methylan was determined by measuring its nitrogen content obtained from an elemental analysis. From the analysis of mass spectrum, the DEAE group in DEAE-methylan was also confirmed by determining diethylaminoethene as a separate form of DEAE. Mercury adsorption of DEAE-methylan was higher than that of native methylan. This fact was valid for a variety of pH, reaction times, metal concentrations, and polysaccharide concentrations. In particular, native methylan and DEAE-methylan adsorbed 16% (w/w) and 18% (w/w) for mercury after 30 min at pH 7, respectively. The increase in mercury adsorption of DEAE-methylan may be resulted from mercury adsorption by the lone pair electron of nitrogen atom in DEAE group.

• Computers and Concrete
• /
• 제11권4호
• /
• pp.317-336
• /
• 2013

In this study, the pore structure of Portland cement paste is experimentally characterized by MIP (mercury intrusion porosimetry) and nitrogen adsorption, and simulated by a newly developed status-oriented computer model. Cement pastes with w/c=0.3, 0.4 and 0.5 at ages from 1 day to 120 days are comprehensively investigated. It is found that MIP cannot generate valid pore size distribution curves for cement paste. Nevertheless, nitrogen adsorption can give much more realistic pore size distribution curves of small capillary pores, and these curves follow the same distribution mode. While, large capillary pores can be effectively characterized by the newly developed computer model, and the validity of this model has been proved by BSE imaging plus image analysis. Based on the experimental findings and numerical simulation, a hypothesis is proposed to explain the formation mechanism of the capillary pore system, and the realistic representation of the pore structure of hydrated cement paste is established.

• 한국환경과학회지
• /
• 제29권12호
• /
• pp.1261-1274
• /
• 2020

The characteristics of ammonia-nitrogen (NH4+-N) adsorption by a zeolitic material synthesized from Jeju scoria using the fusion and hydrothermal method was studied. The synthetic zeolitic material (Z-SA) was identified as a Na-A zeolite by X-ray diffraction, X-ray fluorescence analysis and scanning electron microscopy images. The adsorption of NH4+-N using Jeju scoria and different types of zeolite such as the Z-SA, natural zeolite, and commercial pure zeolite (Na-A zeolite, Z-CS) was compared. The equilibrium of NH4+-N adsorption was reached within 30 min for Z-SA and Z-CS, and after 60 min for Jeju scoria and natural zeolite. The adsorption capacity of NH4+-N increased with approaching to neutral when pH was in the range of 3-7, but decreased above 7. The removal efficiency of NH4+-N increased with increasing Z-SA dosage, however, its adsorption capacity decreased. For initial NH4+-N concentrations of 10-200 mg/L at pH 7, the adsorption rate of NH4+-N was well described by the pseudo second-order kinetic model than the pseudo first-order kinetic model. The adsorption isotherm was well fitted by the Langmuir model. The maximum uptake of NH4+-N obtained from the Langmuir model decreased in the order of Z-CS (46.8 mg/g) > Z-SA (31.3 mg/g) > natural zeolite (5.6 mg/g) > Jeju scoria (0.2 mg/g).

• Carbon letters
• /
• 제28권
• /
• pp.116-120
• /
• 2018

Nitrogen-doped carbons have attracted much attention due to their novel application in relation to gas storage. In this study, nitrogen-doped porous carbons were synthesized using SBA-15 as a template, polypyrrole as the carbon and nitrogen precursor, and KOH as an activating agent. The effect of the activation temperature ($600-850^{\circ}C$) on the $CO_2$ adsorption capacity of the obtained porous carbons was studied. Characterization of the resulting carbons showed that they were micro-/meso-porous carbon materials with a well-developed pore structure that varied with the activation temperature. The highest surface area of $1488m^2g^{-1}$ was achieved at an activation temperature of $800^{\circ}C$ (AC-800). The nitrogen content of the activated carbon decreased from 4.74 to 1.39 wt% with an increase in the activation temperature from 600 to $850^{\circ}C$. This shows that nitrogen is oxidized and more easily removed than carbon during the activation process, which indicates that C-N bonds are more easily ruptured at higher temperatures. Furthermore, $CO_2$ adsorption isotherms showed that AC-800 exhibited the best $CO_2$ adsorption capacity of $110mg\;g^{-1}$ at 298 K and 1 bar.

• 펄프종이기술
• /
• 제37권1호
• /
• pp.1-9
• /
• 2005

Many factors which affect the adsorption of cationic polymers on fibers and fines have been investigated by many researchers that include contact time, pH, collision frequency, properties of cationic polymers and adsorbent, etc. But the effect of white water quality on the adsorption of cationic polymer have not been examined throughly. In this study, the adsorption of cationic PAM was analyzed as a function of white water quality. The adsorption of the cationic PAM was analyzed by two analysis methods, Kjeldahl nitrogen content measurement and electrokinetic measurements. When the distilled water was used, adsorbed amount of C-PAM and zeta-potential of fibers increased as a function of the addition of C-PAM. When closure level increased, nitrogen content of fibers increased indicating that the cationic PAM was adsorbed. Zeta-potential of fibers, however, showed no significant change with the increased addition of C-PAM. This showed that adsorption of C-PAM was not reflected by zeta-potential of fibers due to the deteriorated efficiency of C-PAM by the anionic contaminants in white water.

• Korean Chemical Engineering Research
• /
• 제61권4호
• /
• pp.598-603
• /
• 2023

촉매를 사용한 전기화학적 암모니아 생산은 주변 온도 및 압력 조건, 환경 친화적인 작동 및 고순도 암모니아 생산을 가능하게 함으로써 전통적인 하버-보쉬 방법을 대체할 대안으로서 가능성이 있다. 본 연구에서는 제1원리 계산을 사용하여 루테늄 촉매의 표면에서 발생하는 질소 환원 반응에 초점을 맞춘다. 루테늄의 (0001) 및 (1000) 표면에서 질소 환원에 대한 반응 경로를 모델링하여 반응 구조를 최적화하고 각 단계에 대한 유리한 경로를 예측했다. 각 표면에서의 N₂의 흡착 구성은 후속 반응 활동에 상당한 영향을 미쳤으며, 깁스자유에너지 분석은 가장 유리한 질소 환원 구성을 도출하였다. 루테늄의 (0001) 표면에서는 질소 분자가 표면에 수직으로 흡착하는 end-on 형태가 가장 유리한 N₂ 흡착에너지가 나타났으며 유사하게, (1000) 표면에서도 end-on 형태가 안정적인 흡착 에너지 값을 보였다. 이어서, distal 및 alternating 구성 모두에서 최적화된 수소 흡착을 통해 NH₃의 최종 탈착까지 이론적으로 완전한 반응 경로를 설명했다.

• Carbon letters
• /
• 제10권4호
• /
• pp.305-313
• /
• 2009

In this study, the adsorption of toxic pollutants onto cetyltrimethylammonium kaolin (CTAB-Kaolin) is investigated. The organo-kaolin is synthesized by exchanging cetyltrimethylammonium cations (CTAB) with inorganic ions on the surface of kaolin. The chemical analysis, the structural and textural properties of kaolin and CTAB-kaolin were investigated using elemental analysis, FTIR, SEM and adsorption of nitrogen at $-196^{\circ}C$. The kinetic adsorption and adsorption capacity of the organo-kaolin towards o-xylene, phenol and Cu(II) ion from aqueous solution was investigated. The kinetic adsorption data of o-xylene, phenol and Cu(II) are in agreement with a second order model. The equilibrium adsorption data were found to fit Langmuir equation. The uptake of o-xylene and phenol from their aqueous solution by kaolin, CTAB-kaolin and activated carbon proceed via physisorption. The removal of Cu(II) ion from water depends on the surface properties of the adsorbent. Onto kaolin, the Cu(II) ions are adsorbed through cation exchange with $Na^+$. For CTAB-kaolin, Cu(II) ions are mainly adsorbed via electrostatic attraction with the counter ions in the electric double layer ($Br^-$), via ion pairing, Cu(II) ions removal by the activated carbon is probably related to the carbon-oxygen groups particularly those of acid type. The adsorption capacities of CTAB-kaolin for the investigated adsorbates are considerably higher compared with those of unmodified kaolin. However, the adsorption capacities of the activated carbons are by far higher than those determined for CTAB-kaolin.

• 펄프종이기술
• /
• 제31권2호
• /
• pp.34-41
• /
• 1999

Adsorption of cationic polyacrylamide dry strength resins onto the surface of papermaking fibers and fines is critical for their effective utilization. Since dry strength resins are frequently employed when recycled fibers containing a great deal of fines are used as a raw material, their adsorption characteristic onto the recycled fiber fines is of great importance. In this study, effects of recycling on adsorption characteristics of cationic polyacrylamide onto primary and secondary fines were examined. Never dried bleached hardwood kraft pulp was beaten and dried for recycling. In each recycling step the adsorption characteristic of a cationic PAM onto primary and secondary fines was evaluated by kjeldahl nitrogen analysis method. The influence of recycling on water retention value and carboxyl content along with the sheet density and tensile strength was examined. Secondary fines of never dried pulp adsorbed twice as much of C-PAM as the primary fines, however, the adsorption capacity of the secondary fines decreased rapidly during the course of recycling and showed lower adsorption capacily than primary fines.