• International Journal of Highway Engineering
• /
• v.14 no.1
• /
• pp.9-16
• /
• 2012

The performance of road markings is classified into the visibility at daytime, night time, wet condition and rainy conditions. The objective of this study is to obtain the driving safety of drivers under conditions of unstable weather condition such as the rain. The visibility of road markings is closely related to the preview time and detection distances and the ways to improve road marking materials and increase the dry retroreflectivity and wet retroreflectivity, which are the measures of daytime and nighttime visibility is researched to decrease the traffic accidents. For this purpose, Road marking glass beads with the refraction rate of 1.5 and 2.2 are introduced to raise the retroreflectivity. After investigating the minimum threshold retroreflectivity and Install Minimum retroreflectivity at home and abroad, minimum control values for the roadmarking visibility and improvement of nightime rainy retroreflectivity are suggested by physical properties and retroreflectivity experiments.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.1
• /
• pp.49-56
• /
• 2021

The purpose of this study is to develop a methodology to select a cluster of night traffic accidents using CRP (Continuous Risk Profile) analysis. the other purpose of this study is to present the characteristics of the traffic accident cluster section selected at night using CRP analysis. The CRP analysis was performed considering traffic volume of target routes through traffic accident data. In addition, variables were set according to the freeway sections. the method of subtracting the daytime CRP from the nighttime CRP was used to analyze the nighttime traffic accident. As a result, Using the CRP analysis, the sections of hotspot were identified and plotted based on traffic accidents. Also, the sections where traffic accidents are frequent were those where IC or Tunnels were installed, and there was a deviation from the general section. In conclusion, CRP analysis could be used to calculate the frequent section of specialized traffic accidents at night, and it was selected as a point in need of improvement due to the frequent occurrence of specialized traffic accidents at night in the section where IC or tunnel facilities are installed. In addition, it is inferred that the number of specialized traffic accidents at night in the section where IC or tunnel facilities are installed is a factor in the problem of night visibility due to lighting facilities.

• Science of Emotion and Sensibility
• /
• v.26 no.2
• /
• pp.129-140
• /
• 2023

Following ISO 20471, in this study, first, two sets of safety clothes and safety vests were made by designing and attaching animal and bird patterns preferred by children to retroreflective films and black fabrics on those fluorescent fabrics and retroreflective materials prescribed by international standards. Second, by mounting a smart photonic device on the safety clothing so that the body can be recognized from a distance even without an ambient light source at night, children can emit three types of light depending on the situation with just one-touch of the button. From a result of comparison with visibility a day and night by dressing a mannequin in the made smart safety clothing, the difference in visibility was evident at night, it was confirmed that we can see the figure of a person even at a distance of approximately 70 m. Therefore, it is expected to contribute to the prevention of traffic and other accidents on the road, as the drivers driving at night or in bad weather can recognize a person from a distance. Third, in case of the energy is exhausted and cannot maintain the stability of the light-emitting function of the optical faber, we can use energy harvesting device, and the light-emitting time will be extended. As a result it comes up to emit light stably for a long time. And this prove that smart photonic safety clothing can also be used for night workers. Therefore, optical fiber safety clothing is expected to be highly wearable not only in real life but also in dark industrial sites due to stable charging by applying the energy harvesting provided by solar cells.

• The Research Journal of the Costume Culture
• /
• v.26 no.4
• /
• pp.503-518
• /
• 2018

The purpose of this study is to illustrate the design of safety suits based on energy-harvesting technology, particularly targeting street cleaners who must work at night with high mobility. The design focuses on applying lightweight energy-harvesting tools and illuminant into the wear. The design development reflects feedback from testers collected via survey constituting a key methodology. The development process has two main stages. Each stage uses a process of design prototyping, internal examination, test sampling, test wearing, and wearers' feedback via survey that consists of questions on visibility, wearing convenience, and washability. The first stage results show the design of safety suits with energy-harvested LED illuminant inserted and the survey results collected from street cleaners dressed in 4 sample and 80 actual suits in total. Improved based on the first-stage survey results, the second stage designs the suits with detachable energy-harvested EL tape. From these 5 sample and 30 actual second-stage suits, the additional survey indicates that this second-stage design facilitates more visibility and convenience in washing and wearing than the first-stage design. Accordingly, one can expect that this new design can apply not only to safety suits for night workers but also to handicapped or outdoor sportswear applications in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.4
• /
• pp.685-694
• /
• 2016

Visibility of lane marking is impaired at night, or in case of rain, and thereby threatens traffic safety. Recently, various studies and technology have been developed to improve lane marking visibility, such as the extension of lane marking life expectancy (up to 1.5 times), improvement of lane marking equipment, improvement of lane marking visibility (32.7%) by applying phosphorescent material mixed paint, and expressway lane design standards alternative (length 6m, gap 12m, width 13cm: 27.8% of painted surface are reduced) adoption with ergonomic analysis. In this study, a set of cost-benefit analyses was performed for the cases where such techniques were applied. Based on the literature review, 26.9% of traffic accidents would be prevented by improving lane marking visibility by 32.7%; accident reduction benefit was calculated as much as 12.5 billion KRW. Meanwhile, total increased cost when introducing phosphorescent material mixed paint and lane design standards alternative is calculated as 30.6 billion KRW. However, economic feasibility could not be secured with 0.41 of cost-benefit ratio when applied to the expressway network as a whole. Additionally, cost-benefit (B/C) analysis was applied to each of the top 20 night accident hot spots and the results of B/C ratios were between 0.67 and 4.20, showing that 11 out of 20 spot sections of expressway can have economic feasibility. This results indicate, with this kind of pavement marking applied to accident hot spots in rural expressway, better visibility and economic feasibility can be guaranteed through traffic accident reduction. Some limitations and future research agenda have also been discussed.

• Science of Emotion and Sensibility
• /
• v.16 no.2
• /
• pp.195-206
• /
• 2013

The main causes of traffic accidents while driving a car is of the driver's visual distraction. In this study, the color sensitivity of the information projected on the windshield were evaluated for HUD (Head Up Display) system which helps the driver's eyes on the road while driving. The driving Information were projected $9^{\circ}$ downward from front sight $0^{\circ}$ under lab's fluorescent lights, LED floorlights and the TV had having 25 [lux] illumination when driving at night environment and 100,000 [lux] of daylight environment. Munsell color hue of the basic five colors (R, Y, G, B, P) and the color of traffic lights YR, W were the color of the seven characters, each character were outlined by White, Gray except for W. Total of 19 experimental stimuli was shown in the environment of day and night driving for asking visibility information of color, fatigue, preferences, and evaluate the degree of interference. The results came out that the bright Y and G color is visibility significantly for daylight. Second, with the outline of the text, the color of the outline works as a background for luminance contrast effects and affects visibility. Third, without the outline, the glass in front of the vehicle acts as the background and the luminance contrast of characters achieve greater brightness and visibility. The luminance contrast between the stimuli and background should be considered for increasing color visibility for driving information which is an important factor for HUD commercialization.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.23 no.2
• /
• pp.213-222
• /
• 1995

To increase the night use level, this study was analyzed perception of users about the public safety, and extracted main variables which were influencing public safety. The public safety was evaluated by the actual (on site) and nonactual users (off site) and the Delphi method. The night users of female and the elders were relatively more than male and the young respectively as compared with day. Walking was predominant in approaching means. In public safety ratings, $\boxDr$vuknerability to violence$\boxUl$varied accoding to sex, income, education, marriage, job, age. $\boxDr$crowding, $\boxDr$noise$\boxUl$ were important variables in satisfying users at night. $\boxDr$Lack of surveillance, $\boxDr$harassment of other person$\boxUl$, $\boxDr$rowdy behavior in poorer visibility$\boxUl$, $\boxDr$fear in lower intensity of light$\boxUl$ and $\boxDr$vulnerability to violence$\boxUl$stood high , so it is required guarantee of security guard to enhance the park use at night Although the ratings between field and indoor evaluation were somewhat different the variables had so similiar rant.

• Journal of Korean Society of Transportation
• /
• v.29 no.4
• /
• pp.125-138
• /
• 2011

The highway visibility reduction caused by fog is one of the major elements of traffic accidents. Though the fog warning systems can lead drivers into safe driving by letting them aware dangerous situations in advance, the optical sensors, such as fog sensor, has been extremely costly. Through recent studies, it is delivered that visibility measurements have become obtainable with relatively cheap cameras and their functionality is as similar as a driver' visual sense. Those measurements however require additional signs or ROI, so it is still costly and unable to utilize the conventional images from the existing systems. This study proposes a new method to detect the visibility in real time based on the conventional images from the existing CCTV cameras. The proposed method builds a road model and extracts and applies vehicle movements and visible lines - those highlight easy and quick visibility measurements. The proposed method has advantages of both (1) having possible day and night visibility measurements similar to drivers' visual sense and (2) being easily applied to the existing CCTV system without additional devices. This paper presents field experiments using images acquired from the Central Inland Expressway and discusses future research directions.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.24 no.1
• /
• pp.25-32
• /
• 2016

This study deals with the light environments and weather conditions affecting to the night illuminance over the Korean peninsula. The experiment was executed to analyze the effects on the illuminance at separate sites(Gyeryong and Pilseung) considering the different light environments. The analysis was applied to illuminance measurement from the lightmeter, which was developed for the IYA(International Year of Astronomy) 2009, in order to observe the illuminance of areal networks. The weather observations, such as the cloud cover and visibility, were used to understand the quantitative influence of the illuminance to the selected sites. The results show that the illuminance measurements are significantly different from data of the operational illuminance prediction model which simply applies extinction effect for the illuminance. It shows that these differences are caused by the light environments and weather conditions for each site. Therefore, it can be confirmed that the night illuminance is the output of interaction with the characteristics of light for luminous sources.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.8
• /
• pp.2749-2763
• /
• 2021

The desirable result of infrared (IR) and visible (VIS) image fusion should have textural details from VIS images and salient targets from IR images. However, detail information in the dark regions of VIS image has low contrast and blurry edges, resulting in performance degradation in image fusion. To resolve the troubles of fuzzy details in dark regions of VIS image fusion, we have proposed a method of reflectance estimation for IR and VIS image fusion. In order to maintain and enhance details in these dark regions, dark region approximation (DRA) is proposed to optimize the Retinex model. With the improved Retinex model based on DRA, quasi-Newton method is adopted to estimate the reflectance of a VIS image. The final fusion outcome is obtained by fusing the DRA-based reflectance of VIS image with IR image. Our method could simultaneously retain the low visibility details in VIS images and the high contrast targets in IR images. Experiment statistic shows that compared to some advanced approaches, the proposed method has superiority on detail preservation and visual quality.