• ETRI Journal
• /
• 제25권4호
• /
• pp.270-273
• /
• 2003

This paper presents a simple process to integrate thin-film inductors with a bottom NiFe magnetic core. NiFe thin films with a thickness of 2 to 3${\mu}m$ were deposited by sputtering. A polyimide buffer layer and shadow mask were used to relax the stress of the NiFe films. The fabricated double spiral thin-film inductor showed an inductance of 0.49${\mu}H$ and a Q factor of 4.8 at 8 MHz. The DC-DC converter with the monolithically integrated thin-film inductor showed comparable performances to those with sandwiched magnetic layers. We simplified the integration process by eliminating the planarization process for the top magnetic core. The efficiency of the DC-DC converter with the monolithic thin-film inductor was 72% when the input voltage and output voltage were 3.5 V and 6 V, respectively, at an operating frequency of 8 MHz.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.424-429
• /
• 1996

Thin films of Ti-Ni alloy were formed by sputtering under various Ar gas pressures and r. f. powers to investigate the optimum sputtering conditions and to demonstrate their shape memory effect. The composition and structure of the films were examined by electron micro-probe analysis and scanning electron microscope. These films were annealed in order to crystallize them. The mechanical property of the annealed films was evaluated by a conventional bending test. The transformation tmeperatures were determined by differential scanning calorimetry. The shape memory behaviour was examined quantiatatively by changing in sample temperature under various constant loads. It was found that the Ar gas pressure had a critical effect on the mechanical property of the thin film,s although the r.f. power also affected it. The films formed at a high Ar gas pressure were too brittle to be bent successfully. However, the films formed at a low Ar gas pressur could be bent and their shape memory behavior was found to be comparable with that of bulk Ti-Ni alloys.

• 한국자기학회지
• /
• 제4권2호
• /
• pp.100-105
• /
• 1994

대표적인 연자성재료 중의 하나로 알려진 Ni-Fe 합금박막을 고주파 마그네트론 스파터링 장치를 사용하여 제작했다. 박막두께가 Ni-Fe 합금박막의 특성에 미치는 영향을 고찰하기 위하여, 스파터링 시간을 변화시켜 주면서 제작된 시료에 대해 강자성 공명 실험에서 얻은 미분형 공명흡 수곡선을 분석하여, 유효자화 $M_{eff}$, 교환상수(exchange stiffness constant) A, 그리고 분 광학적 분리인자 g를 구했다. 모든 시료에 대해 유효자화는 거의 일정한 값을 보였으나, 교환상수 는 시료의 두께가 증가함에 따라 비교적 큰 증가폭을 나타냈다. 분광학적 분리인자는 시료의 두께 가 증가함에 따라 약간 증가하는 경향성을 보였는데, 이는 스핀자기모멘트에 대한 궤도자기모멘트 의 상대적인 기여가 증가했기 때문인 것으로 생각된다.

• 한국분말재료학회지
• /
• 제25권5호
• /
• pp.375-378
• /
• 2018

Conductive and dielectric SiC are fabricated using electroless plating of Ni-Fe films on SiC chopped fibers to obtain lightweight and high-strength microwave absorbers. The electroless plating of Ni-Fe films is achieved using a two-step process of surface sensitizing and metal plating. The complex permeability and permittivity are measured for the composite specimens with the metalized SiC chopped fibers dispersed in a silicone rubber matrix. The original non-coated SiC fibers exhibit considerable dielectric losses. The complex permeability spectrum does not change significantly with the Ni-Fe coating. Moreover, dielectric constant is sensitively increased with Ni-Fe coating, owing to the increase of the space charge polarization. The improvements in absorption capability (lower reflection loss and small matching thickness) are evident with Ni-Fe coating on SiC fibers. For the composite SiC fibers coated with Ni-Fe thin films, a -35 dB reflection loss is predicted at 7.6 GHz with a matching thickness of 4 mm.

• 한국표면공학회지
• /
• 제48권3호
• /
• pp.73-81
• /
• 2015

Chloride plating solution was fabricated by dissolving metal Ni powders in solution with HCl and deionized water. Effects of deposition conditions on the properties of Ni films electrodeposited from chloride baths were studied. Current efficiency of Ni films electrodeposited from the baths containing saccharin was decreased with increasing the current density. Residual stress of Ni thin films ware measured to be about 230 ~ 435 MPa in the range of current density of $10{\sim}25mA/cm^2$. Cathode current efficiency in baths without saccharin was initially increased with increasing pH, while it was decreased with increasing pH further. Cathode current efficiency in baths with saccharin (except at pH 2) exhibited less 10 ~ 20% than that in baths without saccharin. Residual stress of Ni films electrodeposited from baths without saccharin was measured to be 388 ~ 473 MPa in the range of pH 2 ~ pH 5 and then was increased to 551 MPa at pH 6. On the other hand, residual stress of Ni films electrodeposited from baths with saccharin was increased with increasing pH. Surface morphology was strongly affected by the change of current density, but slightly by solution pH and addition of saccharin.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.264-267
• /
• 2004

[ $Bi_{3.25}La_{0.75}Ti_3O_{12}$ ] (BLT) thin films were prepared by using metal organic decomposition method onto the $LaNiO_3$ (LNO) bottom electrode. Both the structure and morphology of the films were analyzed by x-ray diffraction (XRD) and atomic force microscope (AFM). Even at low temperatures ranging from 450 to $650^{\circ}C$, the BLT thinfilms were successfully deposited on LNO bottom electrode and exhibited (117) orientation. The BLT thin films annealed as low as $600^{\circ}C$ showed excellent ferroelectricity, higher remanent polarization and no significant degradation of switching charge at least up to $5{\times}10^9$ switching cycles at a frequency of 100 kHz and 5 V. For the annealing temperature of $600^{\circ}C$, the remanent polarization Pr and coercive field were $23.5\;C/cm^2$ and 120 kV/cm, respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.306.2-306.2
• /
• 2016

Niobium oxide thin films were synthesized by reactive rf magnetron sputtering. The target was metallic niobium with 2 inch in diameter and the substrate was n-type Si wafer. To control the surface properties of the films, Nb oxide thin films were obtained at various mixing ratios of argon and oxygen gases. Nb oxide thin films were analyzed with alpha step, scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The result of alpha step showed that the thickness of Nb oxide thin films were decreased with increasing the oxygen gas ratios. SEM images showed that the granular morphology was formed at 0% of oxygen gas ratio and then disappeared at 20 and 75% of oxygen gas ratio. The amorphous Nb oxide was observed by XRD at all films. The oxidation state of Nb and O were studied with high resolution Ni 2p and O 1s XPS spectra. And the change in the chemical environment of Nb oxide thin films was investigated by XPS with Ar+ sputtering.

• 한국자기학회지
• /
• 제15권5호
• /
• pp.265-269
• /
• 2005

강자성 공명 측정을 통하여 다양한 층 구성을 갖는 교환 바이어스 박막들의 교환 결합 특성에 대해 연구하였다. 공명자기장의 각도의존 실험을 통하여 일축방향이방성 자기장과 일축이방성 자기장을 구하여 분석하였다. NiFe 단일 박막과 비교하여 교환 바이어스된 NiFe/IrMn, IrMn/NiFe/IrMn, NiFe/IrMn/CoFe 박막들은 큰 일축방향이방성 자기장을 나타내었으며, 일축이방성 자기장 또한 큰 값을 나타내었다. 그러나 NiFe/Cu/IrMn의 경우, Cu의 두께가 두꺼울 때는 매우 작은 일축방향이방성 자기장을 나타내었으며, NiFe 단일 박막과 비슷한 크기의 일축이방성 자기장을 나타내었다. NiFe/IrMn/CoFe 박막의 경우 NiFe와 CoFe 강자성층들에 의해 두 개의 공명 자기장이 나타났다. 그 외에 공명 자기장의 선폭에 관한 분석이 교환 바이어스 특성과 연관하여 논의되어졌다.

• 한국전기전자재료학회논문지
• /
• 제18권4호
• /
• pp.338-343
• /
• 2005

Pb(Zr,Ti)O₃[PZT] thin films were prepared on a highly (100) oriented LaNiO₃[LNO] and a randomly oriented LNO by sol-gel process. The PZT thin films on a highly (100) oriented LNO show a high (100) crystal orientation (F=100 ％), those on a randomly oriented LNO show a random crystal orientation (F=60 ％). All the PZT layer have a flat and dense microstructure with large columnar grains and their grain size are 25 nm. In the ferroelectric curves at electric field of 40 kV/cm, a highly (100) oriented PZT/LNO samples show coercive field, E/sub c/=10 kV/cm and remanent polarization, P/sub r/=14.5 μC/㎠, while a randomly oriented PZT/LNO sample show E/sub c/=10 kV/cm and P/sub r/=5.4 μC/㎠.

• 한국세라믹학회지
• /
• 제41권6호
• /
• pp.450-455
• /
• 2004

NiCr 합금을 열증발원으로 사용한 thermal evaporation법으로 NiCr박막을 $Al_2$O$_3$/Si 기판 위에 증착시켰다. 이 때 동일한 량의 NiCr 합금을 1회에 모두 증착하는 방법과, l/2씩 2회 증착하는 방법으로 NiCr 박막을 각각 증착시켜, 박막의 미세구조에 따른 막의 특성변화를 고찰하였으며, 열처리 온도에 따른 NiCr 박막의 상 변화, 조성변화 및 미세구조 변화를 XRD, AES 및 FE-SEM으로 각각 분석하였다. 열처리 과정에서 박막내부에 존재하는 Cr 성분이 표면 쪽으로 확산하여 산화됨으로써 Cr산화층/Ni 층/Cr 산화층의 전형적인 다층구조를 형성함을 알 수 있었으며, 특히, $700^{\circ}C$ 이상에서는 Ni 층이 Cr산화층을 통하여 표면 쪽으로 확산됨으로써 표면에 원주형 결정립을 가지는 NiO 층을 형성하였다. 특히 Ni 층이 확산 전의 구조를 유지한 채 표면에 추가적인 NiO층이 형성되는데, 이는 형성된 Cr산화층의 확산이 상대적으로 Ni 층에 비하여 어려운데 기인한다.