• Restorative Dentistry and Endodontics
• /
• 제32권5호
• /
• pp.469-475
• /
• 2007

본 연구는 물성의 단점이 많은 희석재인 TEGDMA의 사용을 줄이기 위해, Bis-GMA의 유도체로서 중합수축이 적고 점도가 낮은 새로운 단량체인 methoxlyated Bis-GMA (Bis-M-GMA)를 첨가한 복합레진의 법랑질과 상아질 변연에서의 미세누출을 비교하였다. 40개의 발거된 상하악 소구치의 협면과 설면에 $2\;mm\;{\times}\;2\;mm\;{\times}\;2\;mm$ 와동을 형성하여 4개 군으로 분류하였다. Clearfil SE bond와 복합레진을 이용하여 와동을 수복하였다. EX1군은 실험용 복합레진 1 (Bis-M-GMA/TEGDMA = 95/5wt% ,40 nm 나노필러 함유), EX2군은 실험용 복합레진 2 (Bis-M-GMA/TEGDMA = 95/5wt%, 20 nm 나노필러 함유), EX3군은 실험용 복합레진 3 (Bis-GMA/TEGDMA = 70/30wt%, 40 nm 나노필러 함유), Z250군은 Filtek 2250으로 각각 와동을 수복하였다. 모든 시편은 실온의 실온의 생리식염수에서 7일간 보관한 후, $5^{\circ}C$와 $55^{\circ}C$ 의 수조에서 500회의 열순환을 실시하고, 2% methylene blue염색 용액에 24시간 담근 후, 협설측으로 치아 장축에 평행하게 절단하고 광학입체현미경하에서 각 수복물의 법랑질과 상아질 변연부의 색소침투 정도를 관찰하여 미세누출점수로 기록한 후 각 군의 유의성을 검증하였다. 법랑질 변연이 상아질 변연보다 유의성있게 낮은 미세변연누출을 보였다 (p = 0.007). 각 변연에서 EX1, EX2보다 EX3, Z250군의 염색침투도가 증가하는 경향을 보였지만 통계적으로 유의성 있는 차이를 보이지는 않았다 (p > 0.05). 점도가 낮은 새로운 레진단량체인 Bis-M-GMA는 기존의 단량체인 Bis-GMA의 대체재로 고려될 수 있다.

• 한국정밀공학회지
• /
• 제21권6호
• /
• pp.160-166
• /
• 2004

In this study, a new algorithm, named as Contour Offset Algorithm(COA) is developed to fabricate precise features or patterns in the range of several micrometers by nano replication printing(nRP) process. In the nRP process, a femto-second laser is scanned on a photosensitive monomer resin in order to induce polymerization of the liquid monomer according to a voxel matrix which is transformed from the bitmap format file. After polymerization, a droplet of ethanol is dropped to remove the unnecessary remaining liquid resin and then only the polymerized figures with nano-scaled precision are remaining on the glass plate. To obtain more precise replicated features, the contour lines in voxel matrix should be modified considering a voxel size. In this study, the efficiency of the proposed method is shown through two examples in view of accuracy.

• 한국인쇄학회지
• /
• 제18권1호
• /
• pp.13-24
• /
• 2000

UV-curable resin has the properties of quick-drying, high productivity at low temperature, energy, space saving, solventless, non-polluting and low-stinking, and thus, UV-curing system has been widely used in the fields of printing inks, adhesives, paints and coating agents. This study has been executed to develop a new functionnal material by the polymerization induced phase separation. The results obtained were as follows. As for the curing properties of the monomer/prepolymer/alkyd resin blends, it was found out that there was a peak by the polymerization induced phase separation when measuring the changes of viscosity and elasticity. It was also found out that such polymerization phase separation occurred in case that the alkyd resin contents were 20wt% and 30wt% and not found at the contents of 40wt%. Therefore, it would be desirable to maintain the contents of alkyd resin at less than 30wt% in order to use the polymerization induced phase separation.

• 한국안광학회지
• /
• 제13권3호
• /
• pp.1-6
• /
• 2008

목적: 플라스틱 안경렌즈용 모노머 소재는 거의 전량이 선진국으로부터 국내안경관련 업체가 수입해오고 있는 실정이며 FTA 대비 및 침체되어 가고 있는 안경관련 산업의 활성화를 위해서는 플라스틱 안경렌즈 관련 재료 개발이 절실히 요구되고 있다. 안경렌즈용 소재의 수입대체 효과를 얻기 위해서는 새로운 플라스틱 안경렌즈의 모노머 소재 개발이 절실히 필요하다. 본 연구는 새로운 우레탄계 초고굴절률 플라스틱 안경렌즈 모노머 수지를 합성하고 이를 이용한 안경렌즈 제조한 후, 안경렌즈의 특성을 연구하고자 한다. 방법: 초고굴절용으로 사용가능한 안경렌즈 수지인 ETS-4(2-(2-mercaptoethylthio)-3-{2-[3-mercapto-2-(2-mercaptoethylthio) propylthio]ethylthio}propane-1-thiol)를 합성하고, 이 물질의 확인 및 특성을 연구하기 위해 원소분석, EI-MS, TGA, FT-IR 분광기, ^1H$ 및 $^{13}C$ NMR 분광기 등을 이용하였고 모노머 수지와 디이소시아네이트를 혼합하여 균일하게 섞은 후, 안경몰드에 케스팅하고 가열경화하여 얻은 안경렌즈의 광학적인 특성을 조사하기 위해 굴절률 및 아베수를 측정하여 비교하였다. 결과: 합성하고자 하는 소재는 원소분석, EI-MS, TGA, FT-IR 분광기, ^1H$ 및 $^{13}C$ NMR 분광기 등의 측정에서 얻은 결과에 의하면 합성되었다는 확인하였고, 합성물질은 세 가지의 이성질체의 존재를 $^{13}C$ NMR 분광법으로 확인 할 수 있다. 아베굴절계로 측정한 액상 상태의 모노머 굴절률은 1.647이었다. ETS-4 모노머 및 디이소시아네이트 종을 이용하여 제조한 안경렌지의 생지는 무색투명하며, 생지의 굴절률은 1.656~1.680 이었다. 결론: 새로운 초고굴절용 플라스틱 안경렌즈의 모노머를 합성하고, 그 물질의 구조 및 특성을 연구하였다. 이를 이용하여 제조한 플라스틱 안경렌즈는 무색투명하며 특성이 우수하여 상업화가 가능하다.

• 대한소아치과학회지
• /
• 제25권2호
• /
• pp.259-267
• /
• 1998

For more than two decades, many investigators have tried a variety of methods for delivering antimicrobial agents to the oral cavity with the objective of eliminating mutans streptococci. In the belief that the effectiveness of chemotherapy might be improved by a more effective delivery system, the intention of the present study was to exploit a new drug delivery system delivering chlorhexidine to the oral cavity. The vehicle delivering chlorhexidine tested in this study was self-curing acrylic resin(polymethyl methacrylate). The powder of the acrylic resin was polymerized with the 5 different liquid preparations, in which $Chlorzoin^{(R)}$ was mixed with five different monomer/Chlorzoin ratios immediately prior to the polymerization, in a stainless steel mold ($40mm{\times}40mm{\times}2mm$). A total of 50 cured resin specimens were divided into 5 groups according to the different monomer preparations. Every specimen was soaked in an airtight container filled with distilled water (100 ml) and then kept in an incubator at $37^{\circ}C$. The solutions (0.8 ml) were collected from the container at every 24 hours, and the amount of released chlorhexidine in the solutions was measured in an ultraviolet spectrophotometer at 250nm. The container was refilled with distilled water every after measurement. This procedure was repeated for 14 days. It was found that chlorhexidine was continuously released from all of the 50 specimens during the experimental period. And it was noted that the pattern of chlorhexidine release was a type of sustained-release preparation, that is, the amount of the released chlorhexidine at the first day in all 5 groups was high (p<0.0001), and then the release was decreased during the rest of the experimental period (p<0.001).

• Restorative Dentistry and Endodontics
• /
• 제33권1호
• /
• pp.1-8
• /
• 2008

본 연구는 공초점 현미경을 이용하여 새로운 단량체와 filler의 크기, 연마방법이 실험용 복합레진의 표면조도에 미치는 영향을 연구하였다. 단점이 많은 희석재인 TEGDMA의 사용을 줄이기 위해, Bis-GMA의 유도체로서 중합수축이 적고 점도가 낮은 새로운 단량체인 methoxlyated Bis-GMA (Bis-M-CMA)를 첨가하고 다른 크기의 filer를 갖는 2종의 실험용 복합레진과 TEGDMA를 함유한 1종의 실험용 복합레진을 제작하였다. EX1; 실험용 복합레진 1 (Bis-M-GMA/TEGDMA = 95/5 wt%, 40 nm 나노필러 함유), EX2; 실험용 복합레진 2 (Bis-M-GMA/TEGDMA = 95/5wt%, 20 nm 나노필러 함유), EX3; 실험용 복합레진 3 (Bis-GMA/TEGDMA = 70/30 wt%, 40 nm 나노필러 함유). 테프론 몰드를 이용하여 지름 6 mm 두께 2 mm의 시편을 각 실험용 복합레진과 Filtek Z250으로 9개씩 만들고 3군으로 분류하였다. Mylar strip 군은 연마를 하지 않았고, Sof-lex군은 #1000 SiC paper로 연마한 뒤 501-lex disc로 연마하였다. Diapolisher 군은 #1000 SiC paper로 연마한 뒤 DiaPolisher polishing point로 연마하였다. 공초점 현미경을 이용하여 각 시편당 7군데에서 Rq (Root mean square roughness), Rv (Valley roughness), Rp (Peak roughness), Rc (2D Roughness), Sc (3D Roughness) 값을 측정하였고, Two-way ANOVA와 Tukey multiple comparisons test로 유의수준 0.05로 통계처리 하였다. 복합레진의 종류 (p < 0.001), 연마 방법 (p < 0.001)은 각각 모두 표면조도 값에 영향을 미치며, 복합레진의 종류와 연마 방법 간에는 교호 작용이 관찰되었다 (p < 0.001). 복합레진의 종류에 따른 표면조도는 EX2가 가장 거친 표면을 보였고, EX3이 가장 평활한 면을 형성하였으며 (p < 0.05). 연마 방법에서는 연마하지 않은 Mylar strip 군이 가장 평활한 면을 형성하였다 (p < 0.05). 본 연구 결과를 종합하여보면 연마하지 않고 Mylar strip하에서 복합레진이 중합된 경우 가장 낮은 표면조도와 평활한 표면을 보였으며, 새로운 레진 단량체인 Bis-M-GMA를 함유한 복합레진이 수복물의 표면조도 측면에서는 필러 크기에 관계없이 기존의 Bis-GMA/TEGDMA를 기질단량체로 사용하는 복합레진에 비교하여 우수하지 못한 것을 확인하였다.

• 대한치과기공학회지
• /
• 제35권4호
• /
• pp.313-320
• /
• 2013

Purpose: The purpose of this study was to know the physical properties of UDMA dental composite resins containing two photosensitizers, PD, DA, as a photosensitizer instead of CQ. We want to know Remaining Double Bond(RDB) of UDMA unfilled resin and diametral tensile strength and flexural strength of composite resin containing PD and DA were compared with those of CQ, most widely used photosensitizer for dental composite resins. Methods: The RDB of UDMA studied by FT-IR spectroscopy increased with irradiation time. The composite resins were tested for their physical properties. The dental composite resins were made with UDMA as a monomer, silanized silica as filler, N,N-dimethylaminoethyl methacrylate (DAEM) as amine initiator, and one of the two kinds of new photosensitizers. Results: The relative RDB of UDMA was in the order: DA > CQ > PD but the physical properties of the composite resins show PD and DA with higher results compared with that containing CQ. The reason for the results is that PD and DA serve not only as a photosensitizer but also as a photo-crosslinking agent. Conclusion: PD and DA show as effective photosensizers, suitable for UDMA dental composite resin compare with a higher efficiency than CQ.

• 대한소아치과학회지
• /
• 제25권4호
• /
• pp.797-810
• /
• 1998

The purpose of this study was to develop a new way of delivery system of chlorhexidine using self-curing acrylic resin. Different preparations of chlorhexidine, such as chlorhexidine varnish($Chlorzoin^{(R)}$) and chlorhexidine diacetate crystalline, were mixed into self-curing acrylic resin with different methods. Every resin plate was made and was immersed in 100ml of distilled water individually, and kept in an incubator at $37^{\circ}C$. Solution(0.8ml) was collected from the each container at every 24 hours, and the amount of released chlorhexidine in the solution was measured in an ultraviolet spectrophotometer at 255nm. Flexural strength of all of the resin plates in the Experiment 2-A and 2-B were measured using Instron at the end of the experimental periods. The results were as follows: 1. It was found that chlorhexidine was released from the experimental groups in the Experiment 1, 2-A, and 2-B. And the release of chlorhexidine from all of the experimental groups showed a pattern of sustained-release preparation. 2. It seemed likely that a condition of "dryness" reduced a release of chlorhexidine from the chlorhexidine varnish. 3. It may be stated that a method of "chlorhexidine diacetate mix" with the polymer be more efficient than a method of "Chlorzoin mix" with the monomer. 4. Although it was evident that a flexural strength of the acrylic resin plates be reduced by a mix of either Chlorzoin or chlorhexidine diacetate crystalline, it seemed likely that the resin plates except Group 4 and 5 in the Experiment 2-B may be usable in the clinical situation.

• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.210-217
• /
• 2004

In this study, a new process, named as nano replication printing(nRP) process, is developed for printing any figure in the range of several micrometers by using voxel matrix scanning scheme. In this newly developed process, a femto-second laser is scanned on a photosensitive monomer resin in order to induce polymerization of the liquid resin according to a voxel matrix which is transformed from bitmap format file. After the polymerization, a droplet of ethanol is dropt to remove the unnecessary remaining liquid resin and then the polymerized figures with nano-scaled precision are only remaining on the glass plate. By the nRP process, any figure file of bitmap format could be reproduced as nano-scaled precision replication in the range of several micrometers. Also, nano/micro-scaled patterns for an extremely wide range of applications would become a technologically feasible reality. Some of figures with nano-scaled precision were printed in scaled replication as examples to prove the usefulness of this study.

• 접착 및 계면
• /
• 제3권1호
• /
• pp.9-12
• /
• 2002

In this paper, N,N-m-phenyenedimaleimide (m-PDM), Polyamide Resin (PI) and Metallic dimethacrylate etc. influencing the heat resistance of anaerobic adhesive has been studied, an anaerobic adhesive composition capable of post-cure expansion and $230^{\circ}C$ temperature resistance comprising a multifunctional methacrylate and m-PDM capable of effectuating expansion upon post-cure has been developed. A homogeneous mixture of a monomer and m-PDM are subjected to a first cure heat stage (Room Temperature) wherein a rigid partially-cured plastic is formed and a post-cure heat stage ($150^{\circ}C$) to effectuate permanent expansion of cured adhesive composition.