• 한국세라믹학회지
• /
• 제51권4호
• /
• pp.231-242
• /
• 2014

An interconnect in solid oxide fuel cells (SOFCs) electrically connects unit cells and separates fuel from oxidant in the adjoining cells. The interconnects can be divided broadly into two categories - ceramic and metallic interconnects. A thin and gastight ceramic layer is deposited onto a porous support, and metallic interconnects are coated with conductive ceramics to improve their surface stability. This paper provides a short review on ceramic materials for SOFC interconnects. After a brief discussion of the key requirements for interconnects, the article describes basic aspects of chromites and titanates with a perovskite structure for ceramic interconnects, followed by the introduction of dual-layer interconnects. Then, the paper presents protective coatings based on spinel-or perovskite-type oxides on metallic interconnects, which are capable of mitigating oxide scale growth and inhibiting Cr evaporation.

• 신재생에너지
• /
• 제8권3호
• /
• pp.30-37
• /
• 2012

In this study, we studied solar cell and fuel cell. To estimate the technology competitiveness, we used patent analysis using patent information and delphi method. For patent analysis, PII indicating the impact of patent was used. Also to analysis PII, citations data of registered and published patent were used from 2001 through 2010 in the United States, Japan, South Korea and the European Patent Office. And the delphi method results of the 'International trend analysis on the Green Energy Technology and the establishment of international cooperation models(2009)' were cited to estimate the technology level. According to the analysis results, Korea's patent registration growth rate was fairly high, but the patent impact and technology levels were significantly lower than in the United States, Japan and Germany. Especially in the solar cell, United States's PII is 1.8, but Korea's PII is 0.2. And the technology level of United States is 7 to 8, but Korea's is 5 to 6. Therefore, to improve technology competitiveness, Korea need to enhance the core technology R&D, and set up the consumer-oriented R&D strategy for commercialization from R&D planning phase. In this study, we analysed competitiveness of renewable energy which is not actively discussed. But there are limitations of the study because we used the result of past research and patent data in the past 10 years. Therefore to accurate research the period of patent data should be extended. Finally diverse indicators for measuring the technology competitiveness should be researched and developed.

• 한국지열·수열에너지학회논문집
• /
• 제5권2호
• /
• pp.7-12
• /
• 2009

The fossil fuel has been used as the main resource of national development. Through this process, many environmental problems have happened. For example, we depend 97% energy on import for national spending and the exhaustion of the fossil fuel is at an important issue nowadays. So more people are interested in renewable energy which is more environmental and never be gone. However, the supply doesn't go on smoothly because of some problems such as capital condition, the limitation of geographical features and low technology, etc. In conclusion I'd like to check some policies and support systems about renewable energy first, and then to find problems for adapting other area through the comparison in this thesis.

• 신재생에너지
• /
• 제7권4호
• /
• pp.10-17
• /
• 2011

Recently, electricity industry is facing high market uncertainty which has ever had and which increase risks in power market. In this study, we analyze risk factors such as discount rates, initial investment (overnight cost), plant factor, fuel cost, carbon price, etc, for the perspective of investor. For the analysis of risk factors, we used LCOE method. The results of this study show that renewable energy is more affected by plant factor and overnight cost than other risk factors. First, Renewable energy has higher proportion of overnight cost in the total investment than that of other technologies. Second, renewable energy is free of fuel cost and carbon price so plant factor is the most important factor, in other words, competitiveness of renewable energy depends on plant factor. Furthermore, we conducted economic feasibility of wind power and PV in domestic case study. The minimum requirement condition to get profitability is that plant factor 15% and overnight cost \6,000,000/kW and 26%, \2,200,000/kW for PV and Wind Power, respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.109.1-109.1
• /
• 2011

KEPCO was operating power plants with diesel generators in 49 islands including Baekryeong-Do, and the generation capacity was about 66 MW in 2008. The cost of fuel is increasing by the international oil price inflation and continuous rise of oil price is predicted. For the stabilizing of electric power supply to the separate islands, renewable energy and fuel cell systems were considered. Hydrogen is made using renewable energy such as wind power and solar energy, and then a fuel cell system generates electricity with the stored hydrogen. Though the system efficiency is low, it is treated as the only way to secure the stable electric supply using renewable energy at this present. The analytic hierarchy process was used to select suitable candidate island for the system installation and 5 islands including Ulleung-Do were selected. Economic evaluation for the system composed of a kerosene generator, a wind power, an electrolysis, and a fuel cell system was conducted with levelized generation cost based on present value methode. As the result, the necessity of renewable energy combined generation system and micro grid composition in the candidated islands was confirmed. Henceforth, the development of an integration technology which connects micro grid to the total power grid will be needed.

• 한국수소및신에너지학회논문집
• /
• 제26권5호
• /
• pp.484-492
• /
• 2015

As our government is actively introducing the RPS (Renewable Portfolio Standards) as a national renewable energy obligation policy, power producers are using the various renewable energy to meet the RPS supply quota since 2012. Recently, it is appling to use power bio-fuel oil in bio-fuel oil demonstration project with power companies. In general, power bio-fuel oils are composed of mixture products of vegetable oil, animal fat, fatty acid ester and waste oil. It is already developing for a power plant as a renewable energy abroad. In Korea, it is studying a 100% combustion and blended combustion of heavy fuel oil and bio-fuel oil. In this study, we investigated fuel characteristics of mixed power bio-fuel oil and its emission performance. Especially, it was reduced emissions of bio-oil in industrial boilers due to bio-fuel properties as compare with fuel oil.

• 에너지공학
• /
• 제23권4호
• /
• pp.31-40
• /
• 2014

국제적인 온실가스 감축 논의에 대한 구체적인 대응방안의 하나로, 우리나라는 2035년까지 신재생에너지 보급률 11% 달성을 목표로 하는 제2차 에너지기본계획을 수립하였다. 국내 신재생에너지 부문은 8개 분야 재생에너지(태양열, 태양광발전, 바이오매스, 풍력, 소수력, 지열, 해양에너지, 폐기물에너지)와 3개 분야 신에너지(연료전지, 석탄액화가스화, 수소에너지) 등 총 11개 분야로 구성되어 있다. 신재생에너지 보급 확대를 위한 정부와 민간의 투자가 늘어나면서, 신재생에너지 부문의 경제적 파급효과를 규명할 필요성도 증가하고 있다. 이에 본 논문에서는 가장 최근에 발표된 2012년도 산업연관표를 이용한 산업연관분석을 적용하여 신재생에너지 부문의 경제적 파급효과를 분석하고자 한다. 먼저 수요유도형 모형을 이용하여 신재생에너지 부문의 생산유발효과, 부가가치 유발효과, 취업유발효과를 분석한다. 둘째, 공급유도형 모형을 활용하여 공급 지장효과를 살펴본다. 마지막으로 레온티에프 가격모형을 통해 물가파급효과를 도출한다. 분석결과는 다음과 같이 된다. 첫째, 신재생에너지 부문의 1원 생산 또는 투자는 2.1776원의 생산과 0.7080원의 부가가치를 유발한다. 아울러 신재생에너지 10억원 생산 또는 투자의 취업유발효과는 9.0337명이다. 둘째, 신재생에너지 부문의 1원 공급지장으로 인한 국민경제 전체적인 생산 차질액은 1.6314원으로 분석되어 그 값이 작지 않았다. 셋째, 신재생에너지 부문 산출물의 가격이 10% 오를 때의 국민경제 전체적인 물가파급효과는 0.0123%로 작은 편이다. 이상의 정량적 정보는 신재생에너지 부문의 생산 및 투자 확대의 경제적 파급효과를 사전적으로 예측하는 데 중요한 정보로 활용될 수 있다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.658-661
• /
• 2007

It was investigated on this paper that the status of biomass energy utilization in the registered CDM projects. The ratio of the case including the energy recovery among the registered biomass CDM projects is just about 57%. Direct thermal conversion technology is the most commonly applied for biomass energy recovery projects. Through the comparative study with world renewable energy outlook, the contribution of CDM to biomass energy supply in the world is not considerable yet.

• 한국수소및신에너지학회논문집
• /
• 제20권2호
• /
• pp.116-124
• /
• 2009

We investigated the influences of cobalt coating deposited by DC electroplating on the ferritic stainless steel, STS 430, as a protective layer on a metallic interconnect for SOFC applications. Cobalt coated STS 430 revealed a uniform and denser-packing oxide surface and a reduced growth rate of $Cr_2O_3$ scales after oxidation at $800^{\circ}C$in air. Cobalt coating layer was oxidized to $CoCo_2O_4$ and Co containing mixed oxide spinels such as $Co_2CrO_4$, $CoCr_2O_4$, and $CoCrFeO_4$. The area specific resistance value of Co coated sample was $0.020\;{\Omega}cm^2$ lower than that of uncoated at $800^{\circ}C$ in air during 500 h. After 1000 h oxidation, cobalt oxide coating layer suppressed chromium outward diffusion.

• 한국수소및신에너지학회논문집
• /
• 제20권6호
• /
• pp.455-463
• /
• 2009

코발트 보호막 코팅이 적용된 페라이트계 스테인리스 스틸인 STS 430과 STS 444 소재에 대해 고체산화물 연료전지용 금속연결재로서의 고온 산화 특성에 대해 살펴보았다. 코발트 코팅층은 $800^{\circ}C$ 고온 산화 후 코발트 산화물 및 $Co_2CrO_4$, $CoCr_2O_4$, $CoCrFeO_4$ 등과 같은 코발트가 함유된 스피넬 상을 형성하였다. 또한 페라이트계 스테인리스 스틸과 코발트 코팅의 계면에서 크롬과 철이 함유된 치밀한 산화층을 형성하여 금속연결재 표면의 스케일 성장속도를 감소시키고 금속연결재 내에 함유된 크롬의 외부 확산을 효과적으로 억제하였다. 한편 STS 430은 고온 산화 후 표면에 형성된 스케일 하부에 $SiO_2$와 같은 내부 산화물이 형성된 반면 STS 444는 표면 스케일 이외에 다른 내부 산화물은 확인되지 않았으며 고온에서의 면저항 측정 결과, 코발트가 코팅된 STS 444의 전기 전도성이 STS 430 보다 우수한 것으로 나타났다.