• International Journal of Control, Automation, and Systems
• /
• v.5 no.4
• /
• pp.372-378
• /
• 2007

This paper discusses Robust $H{\infty}$ control problems for networked control systems (NCSs) with time delays and subject to norm-bounded parameter uncertainties. Based on a new discrete-time model, two approaches of robust controller design are proposed. A numerical example and experimental verification with an NCS test bed are given to illustrate the feasibility and effectiveness of proposed design methodologies.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2328-2330
• /
• 2003

This paper presents a new design methodology of networked control system using CAN(Controller Area Network). Feedback control systems having control loops closed through a network are called networked control systems. We design CAN nodes which can transmit control and monitoring data through network bus and apply these to networked control system design. We analyze the variation of stability property according to network-induced delay and determine a proper sampling period of networked control system that preserves stability performance. The results of the experimental example validate effectiveness of our networked control system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.11
• /
• pp.1131-1135
• /
• 2014

This paper proposes the enhanced faulty node detection scheme with hybrid algorithm using Markov-chain model on BCH (Bose-Chaudhuri-Hocquenghem) code in naval distributed control networked systems. The probabilistic model-driven approach, on Markov-chain model, in this paper uses the faulty weighting interval factors, which are based on the BCH code. In this scheme, the master node examines each slave-nodes continuously using three defined states : Good, Warning, Bad-state. These states change using the probabilistic calculation method. This method can improve the performance of detecting the faulty state node more efficiently. Simulation results show that the proposed method can improve the accuracy in faulty node detection scheme for real-time naval distributed control networked systems.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.4 no.2
• /
• pp.97-102
• /
• 2009

In this paper, the problem of stability analysis for networked control systems with norm-bounded parameter uncertainties is investigated. By construction Lyapunov's functional, a new delay-dependent stability criterion for uncertain networked control system is established in terms of LMIs (linear matrix inequalities) which can be easily by various convex optimization algorithms. One numerical example is included to show the effectiveness of proposed criterion.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.10
• /
• pp.678-689
• /
• 2004

The major concern of networked control system is network uncertainties such as time delay and data loss. Because these uncertainties may degrade the performance of networked control system and destabilize the entire system. Therefore, the performance and the stability variation of networked control system due to network uncertainties must be considered first in designing networked control system. In particular, the stability analysis of networked control system is most important issue since time delay and data loss can make the overall systems unstable. In this paper, we present a new stability analysis method of networked control system with time delay and data loss, which is impossible in previous works. The proposed method can determine maximum time delay and allowable transmission rate that preserve stability performance of networked control system. The results of the simulation validate effectiveness of our stability analysis method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.1
• /
• pp.80-88
• /
• 2002

As many sensors and actuators are used in automated systems, various industrial networks are adopted for digital control system. In order to take advantages of the networking, however, the network implementation should be carefully designed to satisfy real-time requirements considering network delays. This paper presents the implementation scheme of a networked control system via Profibus-DP network. More specifically, the effect of the network delay on the control performance was evaluated on a Profibus-DP testbed, and a GA-based PID tuning algorithm is proposed to design controllers suitable for networked control systems.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.6
• /
• pp.915-927
• /
• 2008

Networked control systems(NCSs) have gained increasing attention in recent years due to their advantages and potential applications. The network Quality-of-Service(QoS) in NCSs always fluctuates due to changes of the traffic load and available network resources. To handle the network QoS variations problem, this paper presents an intelligent scheduling control method for NCSs, where the sampling period and the control parameters are simultaneously scheduled to compensate the effect of QoS variation on NCSs performance. For NCSs with network-induced delays and packet dropouts, a discrete-time switch model is proposed. By defining a sampling-period-dependent Lyapunov function and a common quadratic Lyapunov function, the stability conditions are derived for NCSs in terms of linear matrix inequalities(LMIs). Based on the obtained stability conditions, the corresponding controller design problem is solved and the performance optimization problem is also investigated. Simulation results are given to demonstrate the effectiveness of the proposed approaches.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.4
• /
• pp.591-600
• /
• 2005

In this paper, we discuss real-time control of networked control systems (NCSs) and practical issues in the choice of the communication networks for this purpose. An appropriate integration of control systems, real-time environments, and network communication systems allows the optimization of the quality-of-control (QoC) in NCSs. We compare several prevailing network types that may be used in control applications to offer a guideline of choosing a proper network. A real-time operating environment is also presented as an important ingredient of NCS design. To evaluate its feasibility and effectiveness, a real-time NCS containing a ball magnetic levitation (Maglev) setup is implemented via an Ethernet. Based on the experimental results, it is concluded in this paper that real-time control via Ethernet is a practical and feasible solution to NCS design.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.4
• /
• pp.281-287
• /
• 2002

This paper investigates on the feasibility of fuzzy logic control for networked control systems. In order to evaluate its feasibility, a networked control system for motor speed control is implemented on a Profibus-DP network. The NCS consists of several inde-pendent, but interacting processes running on two separate stations. By using this NCS, the network-induced delay is analyzed to find the cause and effect of the delay. Furthermore, in order to prove the feasibility, the fuzzy logic controller's performance is compared with those of conventional PID controllers. Based on the experimental results, the fuzzy logic controller can be a viable choice far NCS due to its robustness against parameter uncertainty.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.133.2-133
• /
• 2001

This paper focuses on the feasibility of fuzzy logic control for networked control systems. In order to evaluate its feasibility, a networked control system for motor speed control is implemented on a Profibus-DP network. The NCS consists of several independent, but interacting processes running on two separate stations. By using this NCS, the network delay is analyzed to find the cause of the delay. Furthermore, in order to prove the feasibility, the fuzzy logic controllers performance is compared with those of conventional PID controllers. Based on the experimental results, the fuzzy logic controller can be a viable choice for NCS due to its robustness against parameter uncertainty.