• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.338-343
• /
• 2006

This paper describes about the design concept and the architecture of an economic VPN system which can perform fast crypto operations with cheap cost. The essence of the proposed system architecture is consisting of the system with two companion chips dedicated to VPN: one chip is a multi-purpose network processor for security machine and the other is a crypto acceleration chip which encrypt and decrypt network packets in a high speed. This study also addresses about some realizations that is required for fast prototyping such as the porting of an operating system, the establishment of compiler tool chain, the implementation of device drivers and the design of IPSec security engine. Especially, the second chip supports the most time consuming block cipher algorithms including 3DES, AES, and SEED and its performance was evaluated.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.359-366
• /
• 2016

Today's multi-core technology rapidly increases with more and more Intellectual Property cores on a single chip. Network-on-Chip (NoC) is an emerging communication network design for SoC. For efficient on-chip communication, routing algorithms plays an important role. This paper proposes a novel multicast routing technique entitled as Docket NoC (Dt-NoC), which eliminates the need of routing tables for faster communication. This technique reduces the latency and computing power of NoC. This work uses a CURVE restriction based algorithm to restrict few CURVES during the communication between source and destination and it prevents the network from deadlock and livelock. Performance evaluation is done by utilizing cycle accurate RTL simulator and by Cadence TSMC 18 nm technology. Experimental results show that the Dt-NoC architecture consumes power approximately 33.75% 27.65% and 24.85% less than Baseline XY, EnA, OEnA architectures respectively. Dt-NoC performs good as compared to other routing algorithms such as baseline XY, EnA, OEnA distributed architecture in terms of latency, power and throughput.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.22-30
• /
• 2009

Due to high levels of integration and complexity, the Network-on-Chip (NoC) approach has emerged as a new design paradigm to overcome on-chip communication issues and data bandwidth limits in conventional SoC(System-on-Chip) design. In particular, exponentially growing of energy consumption caused by high frequency, synchronization and distributing a single global clock signal throughout the chip have become major design bottlenecks. To deal with these issues, a globally asynchronous, locally synchronous (GALS) design combined with low power techniques is considered. Such a design style fits nicely with the concept of voltage-frequency-islands (VFI) which has been recently introduced for achieving fine-grain system-level power management. In this paper, we propose an efficient design methodology that minimizes energy consumption by VFI partitioning on an NoC architecture as well as assigning supply and threshold voltage levels to each VFI. The proposed algorithm which find VFI and appropriate core (or processing element) supply voltage consists of traffic-aware core graph partitioning, communication contention delay-aware tile mapping, power variation-aware core dynamic voltage scaling (DVS), power efficient VFI merging and voltage update on the VFIs Simulation results show that average 10.3% improvement in energy consumption compared to other existing works.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.40-48
• /
• 2015

An optical network-on-chip(ONoC) architecture is emerging as a new paradigm for solving on-chip communication bottleneck. Recent studies on ONoC have been focusing on supporting the parallel transmission and avoiding path collisions using wavelength division multiplexing(WDM). However, since the maximum number of wavelengths, which a single waveguide can accommodate is limited by crosstalk and insertion loss. Therefore previous WDM studies based on incrementing the number of different wavelengths according to the number of nodes would be infeasible due to the implementation complexity. To solve such problems, we combined time division multiplexing(TDM) and wavelength-routed ONoC, along with an optimized channel allocation algorithm, which can minimize the number of extra wavelength channels and latency caused by combining TDM scheme.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.6
• /
• pp.440-445
• /
• 2004

The design and implementation of a Network Processor using System-on-a-chip(SoC) technology is presented. The proposed network processor can handle several protocols as well as various types of traffics simultaneously. The proposed SoC consists of ARM processor core, ATM block, AAL processing block, Ethernet block and a scheduler. The scheduler guarantees QoS of the voice traffic and supports multiple AAL2 packet. The SoC is manufactured on the 0.35 micron fabrication line of HYNIX semiconductor, the total number of gates is about 312,000, for a maximum operating frequency of over to 50㎒.

• ETRI Journal
• /
• v.36 no.4
• /
• pp.643-653
• /
• 2014

To reduce interconnect delay and power consumption while improving chip performance, a three-dimensional integrated circuit (3D IC) has been developed with die-stacking and through-silicon via (TSV) techniques. The power supply problem is one of the essential challenges in 3D IC design because IR-drop caused by insufficient supply voltage in a 3D chip reduces the chip performance. In particular, power bumps and TSVs are placed to minimize IR-drop in a 3D power delivery network. In this paper, we propose a design methodology for 3D power delivery networks to minimize the number of power bumps and TSVs with optimum mesh structure and distribute voltage variation more uniformly by shifting the locations of power bumps and TSVs while satisfying IR-drop constraint. Simulation results show that our method can reduce the voltage variation by 29.7% on average while reducing the number of power bumps and TSVs by 76.2% and 15.4%, respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.6
• /
• pp.412-419
• /
• 2001

In accordance with the PON(passive optical network) could be setup, effective connections with light sources, optical detectors, and optical fibers are the best sensitive points to represent the efficiency of network. Therefore, in this paper we designed and fabricated optical transceiver connection chip that was consisted of channel waveguide, Y-branch, and CWDM on the 2" BK7 glass substrate. This chip can be used for 1.31/1.55${\mu}{\textrm}{m}$ CWDM network and 1.55${\mu}{\textrm}{m}$ region dense WDM network.work.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.4
• /
• pp.24-31
• /
• 2007

Up to date, a lot of bus protocol and bus architecture are released though most of them are based on the shared bus architecture and inherit the limitation of performance. SNP (SoC Network Protocol), and hence, SNA (SoC Network Architecture) which are high performance on-chip-bus protocol and architecture, respectively, have been proposed to solve the problems of the conventional shared bus. We refine the SNA specification and improve the performance and functionality. The performance of the SNA is improved by supporting simultaneous routing for bus request of multiple masters. The internal routing logic is also improved so that the gate count is decreased. The proposed SNA employs XSNP (extended SNP) that supports almost perfect compatibility with AMBA AHB protocol without performance degradation. The hardware complexity of the improved SNA is not increased much by optimizing the current routing logic. The improved SNA works for IPs with the original SNP at its best performance. In addition, it can also replace the AMBA AHB or interconnect matrix of a system, and it guarantees simultaneous multiple channels. That is, the existing AMBA system can show much improved performance by replacing the AHB or the interconnect matrix with the SNA. Thanks to the small number of interconnection wires, the SNA can be used for the off-chip bus system, too. We verify the performance and function of the proposed SNA and XSNP simulation and emulation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.2
• /
• pp.86-94
• /
• 2007

The NoC (network-on-chip) approach is a promising solution to the increasing complexity of on-chip communication problems because of its high scalability. But, NoC applications generally consume a lot of power, because they require a large design space to accommodate many parallel IPs and network communication channels. It is not easy to analyze the power consumption of NoC applications with conventional simulation methods using simple power models. In addition, there are also many limitations in using sophisticated simulation models because they require long execution time and large efforts. In this paper, we apply a cycle-accurate energy measurement technique and tool to the FPGA prototypes, which are generally used to verify the correctness of SoC designs, as a practical indication of the power consumption of real NoC applications. An NoC-based JPEG encoder implementation is used as a case study to demonstrate the effectiveness of our approach.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.180-192
• /
• 2021

One widely used algorithm for image recognition and pattern detection is the convolution neural network (CNN). To efficiently handle convolution operations, which account for the majority of computations in the CNN, we use hardware accelerators to improve the performance of CNN applications. In using these hardware accelerators, the CNN fetches data from the off-chip DRAM, as the massive computational volume of data makes it difficult to derive performance improvements only from memory inside the hardware accelerator. In other words, data communication between off-chip DRAM and memory inside the accelerator has a significant impact on the performance of CNN applications. In this paper, a simulator for the CNN is developed to analyze the main memory or DRAM access with respect to the size of the on-chip memory or global buffer inside the CNN accelerator. For AlexNet, one of the CNN architectures, when simulated with increasing the size of the global buffer, we found that the global buffer of size larger than 100kB has 0.8x as low a DRAM access count as the global buffer of size smaller than 100kB.