• 전자공학회논문지S
• /
• 제35S권8호
• /
• pp.21-31
• /
• 1998

본 논문에서는 복사 네트워크의 멀티캐스트 셀을 적절하게 분배할 수 있는 새로운 분배 알고리즘을 제안한다. 합산기, 분배기, 가상 주소 부호기, 방송 네트워크가 이원적으로 구성된 복사 네트워크는 제안된 분배 알고리즘에 의하여 낮은 번지와 높은 번지가 양분되어 동시에 동작하기 때문에 입력된 셀이 균등하게 처리되어 셀 지연율과 입력 공정성이 개선되고 복잡도가 감소된다. 또한 방송 네트워크로 이진 트리와 Banyan 네트워크로 구성된 확장 Banyan 네트워크를 사용하여 오버플로우 발생 확률을 1/2로 감소 시킨다. 분석 결과 제안된 알고리즘은 입력 버퍼에서 셀 지연율이 확연하게 감소됨을 알 수 있었다.

• 한국통신학회논문지
• /
• 제25권8A호
• /
• pp.1144-1152
• /
• 2000

In order to guarantee the user-requested quality-of-service(QoS) and keep the network utilization at maximum it is required to manage the network performance continuously after the network installation. The performance management function should provide the useful information for the network expansion and the capacity reallocation in the future. Currently the TINA provides the specification of the management function of configuration management connection management and fault management ; but the management function of performance management and security management are not well-defined yet. In this paper we propose a TINA-based performance management architecture for the efficient performance management of the heterogeneous networks or NEs with TMN and SNMP management functions. And we examine the proposed architecture into the ATM network (with SNMP and TMN) monitoring. The proposed architecture is based on the distributed processing architecture and the concept the TMN perfo mance management. The proposed architecture have been designed and implemented in multiprocess and multithread structure.

• 센서학회지
• /
• 제16권4호
• /
• pp.247-253
• /
• 2007

Low power consumption sensor network platform (sensor node) for sensor networking with IEEE 802.15.4 protocol was fabricated. The sensor node used ceramic bar type antenna for increasing RF signal performance and decreasing PCB size occupied by antenna. The communication range of the fabricated sensor node was about $20{\sim}30$ m in open environment with 915 MHz frequency bandwidth and well supported by Tiny OS. The sensor node have good connectivity with various external devices by RS-232, I2C, analogue and digital expansion board, hence, this sensor node can be applied to various applications in wireless sensor network and ubiquitous sensor network.

• 디지털산업정보학회논문지
• /
• 제7권2호
• /
• pp.47-58
• /
• 2011

Snoop was suitably designed for wired and wireless network as having snoop agent module in BS(Base Station) which is connecting to both wired and wireless network in order to supplement the problems of TCP. This study examined performance difference by using the web traffic taken wide possession in current internet traffic. The web traffic has greater amount of traffic, shorter life time, and smaller size than other traffics. This study found that snoop producing performance improvement of wireless network in the network mixed with the wired and wireless lead performance loss when transmitting web traffic. This study found that in case of web traffic is transmitted it bring a performance improvement of web traffic as computing BWE((Bandwidth Expansion), and also found that this study prove of performance improvement by decreasing local retranmission.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.394-397
• /
• 2008

Recently WiBro network is installed for high speed wireless internet service by telecommunication service provider, however WiBro service is not provided in the region of mountain or difficult region to install network infra. Fixed repeater is used to resolve those shadow area problem in current WiBro network. This paper study introducing Ad-hoc based multi-hop relay instead of using fixed repeater in order to resolve those shadow area problem. Cost down of fixed repeater and active network expansion is possible to resolve shadow area problem by introducing multi-hop relay technology.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권3호
• /
• pp.1599-1610
• /
• 2019

Intelligent services have expanded as Internet of Things (IoT) technology has evolved and new requirements emerge to accommodate various services. One new requirement is transmitting data over long distances with low-power. Researchers have developed low power wide area (LPWA) network technology to satisfy the requirement; this can improve IoT network infrastructure and increase the range of services. However, network coverage expansion causes several problems. The traffic load is concentrated at a specific gateway, which causes network congestion and leads to decreased transmission efficiency. Therefore, the approach proposed in this paper attempts to recognize and then avoid congestion through gateway channel hopping. The LPWA network employs multiple channels, so wireless channel hopping is available in a gateway. Devices that are not delay sensitive wait for the gateway to reappear on their wireless channel; delay sensitive devices change the wireless channel along the hopping gateway. Thus, the traffic load and congestion in each wireless channel can be reduced improving transmission efficiency. The proposed approach's performance is evaluated by computer simulation and verified in terms of transmission efficiency.

• International Journal of Computer Science & Network Security
• /
• 제22권1호
• /
• pp.255-261
• /
• 2022

Routing Protocol for Low-Power and Lossy Networks (RPLs) in Internet of Things (IoT) is currently one of the most popular wireless technologies for sensor communication. RPLs are typically designed for specialized applications, such as monitoring or tracking, in either indoor or outdoor conditions, where battery capacity is a major concern. Several routing techniques have been proposed in recent years to address this issue. Nevertheless, the expansion of the network lifetime in consideration of the sensors' capacities remains an outstanding question. In this research, aANN-CUCKOO based optimization technique is applied to obtain a more efficient and dependable energy efficient solution in IOT-RPL. The proposed method uses time constraints to minimise the distance between source and sink with the objective of a low-cost path. By considering the mobility of the nodes, the technique outperformed with an efficiency of 98% compared with other methods. MATLAB software is used to simulate the proposed model.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1249-1252
• /
• 1996

With the expansion of research and development for the CIM and the IMS, the importance of introducing the communication network is being increased. This paper presents an implementation of robot workcell by using Fieldbus and investigates data operation of the robot workcell. Through experiments, the operations of periodic and real-time data, and non-periodic real-time data are studied. Also, the relationship between the network transmission rate and the monitoring results from the sensor is analyzed.

• 한국경영과학회지
• /
• 제20권2호
• /
• pp.77-93
• /
• 1995

A mathematical model for long-rage water supply planning was formulated as a dynamic plant location problem with network arc capacity expansion, and illustative example was presented. The proposed solution procedure identifies economical construction timings of surface water supply facilities and water conveyence systems and the best water supply operating patterns as well. In this study, we present a heuristic solution procedure using Simulated annealing Method in conjunction with Bertsekas & Tseng's RELAXT-II for the 0-1 integer network problem.

• 산업공학
• /
• 제9권1호
• /
• pp.83-93
• /
• 1996

In a very time, the Internet has affected the lives of millions of peoples. Some serious advances have been made in software development, information exchange, publishing, database retrieval, educational opportunities, commercial expansion, political awareness, and more. But this network of network is still in its infancy. More advanced search concept, World Wide Web(or Web) will continue to help users move boldly onto the information highway. It help user work effectively and efficiently. In this article, we explain how to utilize web to enhance research in Industrial Engineering area.