• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.12
• /
• pp.943-948
• /
• 2012

A new water energy harvester module, which is composed of piezoelectric bimorph cantilevers, harvesting circuit and a shaft with 16 impellers at a center axis, was fabricated for energy harvesting application. High energy density $Pb(Zr_{0.54}Ti_{0.46})O_3$ + 0.2 wt% $Cr_2O_3$ + 1.0 wt% $Nb_2O_5$ (PZT-CN) thick film obtained by tape casting method was used for the bimorph cantilever. The PZT-CN bimorph cantilever with a proof mass of 49 g exhibited extremely high output power of 22.5 mW (24 $mW//cm^3$) at resonance frequency of 11 Hz. In addition, the fabricated water energy harvester has a cylindrical structure with 48 bimorph cantilevers clamped at inner surface. A significantly high output power of 433 mW was obtained at a rotation speed of 120 rpm with a resistive load of $500{\Omega}$ for the water energy harvester.

• Journal of the Korean Ceramic Society
• /
• v.45 no.9
• /
• pp.524-530
• /
• 2008

Anti-Reflective (AR) thin film coatings of $SiO_2$ (n= 1.48) and $TiO_2$ (n=2.17) were deposited by ion-beam assisted deposition (IBAD) with End-Hall ion source and conventional electron beam (e-beam) evaporation to investigate the effect of deposition method on the refractive indicies (n) of the fIlms. Green-light generation using a GaAs laser diode was achieved via excitation of the second harmonic. The latter resulted from the transmission of the fundamental guided-mode wave of 1064 nm through periodically poled $LiNbO_3$. Large differences in the refractive indicies of each of the layers in the multilayer coating may improve AR performance. IBAD of $SiO_2$ reduced its refractive index from 1.45 to 1.34 at 1064 nm. Conversely, e-beam evaporation of $TiO_2$ increased its refractive index from 1.80 to 2.11. In addition, no fluctuations in absorption at the wavelength of 1064 nm were found. The results suggest that films prepared by different deposition methods can increase the effectiveness of multilayer AR coatings.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.13 no.1
• /
• pp.31-35
• /
• 2006

The ubiquitin conjugating enzyme 2 (E2) is core component of ubiquitin proteasome pathway (UPP) which represents a selective mechanism for intracellular proteolysis in eukaryotic cells. The E2 has been implicated in the intracellular transfer of ubiquitin to target protein. We show here the involvement of E2 in antiviral immune of Bombyx mori to Bombyx mori nuclear polyhedrosis virus (BmNPV). In this study, mRNA fluorescent differential display PCR (FDD-PCR) was performed with BmNPV highly resistant silkworm strain NB and susceptible silkworm strain 306. At 24 h post BmNPV infection, FDD-PCR with the arbitrary primer AP34 showed that one cDNA band was down-regulated in the midgut of resistant strain, but highly expressed in susceptible strain. The deduced amino acid sequence of this cDNA clone share 99% identity with the recently published B. mori ubiquitin conjugating enzyme E2 (Genbank NO: DQ311351). Fluorescent quantitative PCR corroborated down regulation of E2 in resistant strain. We there conclude that BmNPV infection evokes strong response of susceptible strain including activation of UPP. BmNPV may evolve escape mechanisms that manipulate the UPP in order to persist in the infected host. In addition, the identification of down-regulation of E2 in resistant strain, as well as structure data, are essential to understanding how UPP operates in silkworm antiviral immune to BmNPV disease.

• Journal of Welding and Joining
• /
• v.33 no.4
• /
• pp.30-36
• /
• 2015

Austenite stainless steel(SA213-TP347H) has widely been used for the superheater & reheater tube in USC(ultra-supercritica) coal boiler because of its high creep rupture strength and anti-oxidation. But recently, the short-term failures have happened frequently in heat affected zone for only 4,000~15,000hours of service. Many investigations have been conducted to understand the failure mechanism. The root cause of failure was comfirmed to "strain induce participation hardening crack" or "reheat cracking". This mechanism often occurred due to weld residual stress and precipitation of the Cr, Nb carbides in the stabilized stainless steel such as TP347H. This paper presents an analysis of failure tube and effect of the sample tubes that conducting stabilizing heat treatment in site after 11,380hours & 16,961hours of service. Visual inspection was performed. In addition, microscopic characteristics was identified by O.M, SEM, and hardness test was carried out to find out the heat treatment effects. Failures seem to happen because of being not conducted stabilizing heat treatment in site. And another cause is inadequate weld parameter such as pass, ampere, voltage, inter-pass temperature. Thus, this paper has the purpose to describe that how to prevent similar failures in those weld-joints.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.10
• /
• pp.771-775
• /
• 2010

In this study, piezoelectric and dielectric properties of the $(Na_{0.5}K_{0.5})NbO_3-(1-x)(Bi_{0.5}Na_{0.5})TiO_3-xBaTiO_3$ [NKN-(1-x)BNT-xBT] ceramics were investigated. The lead-free NKN-(1-x)BNT-xBT ceramics were fabricated by a conventional mixed oxide method. The results indicate that the addition of $BaTiO_3$ significantly influences the sintering, microstructure, phase transition and electrical properties of NKN-BNT ceramics. A gradual change in the piezoelectric and dielectric properties was observed with the increase of BT contents. The dielectric constant, piezoelectric constant ($d_{33}$) and electromechanical coupling factor ($k_p$) increased at the morphotropic phase boundary (MPB). The $d_{33}$=184 pC/N, $k_p$=0.38, dielectric constant=1455 with dielectric loss value of less than 1% were obtained for the NKN-0.95BNT-0.05BT ceramics sintered at $1150^{\circ}C$ for 2h. These results demonstrate that the NKN-(1-x)BNT-xBT ceramics is an attractive candidate for lead-free piezoelectric materials.

• Journal of the Korean Society for information Management
• /
• v.35 no.2
• /
• pp.37-62
• /
• 2018

This study examined the factors affecting the performance of automatic classification based on machine learning for domestic journal articles in the field of LIS. In particular, In view of the classification performance that assigning automatically the class labels to the articles in "Journal of the Korean Society for Information Management", I investigated the characteristics of the key factors(weighting schemes, training set size, classification algorithms, label assigning methods) through the diversified experiments. Consequently, It is effective to apply each element appropriately according to the classification environment and the characteristics of the document set, and a fairly good performance can be obtained by using a simpler model. In addition, the classification of domestic journals can be considered as a multi-label classification that assigns more than one category to a specific article. Therefore, I proposed an optimal classification model using simple and fast classification algorithm and small learning set considering this environment.

• Asian Journal of Turfgrass Science
• /
• v.25 no.1
• /
• pp.48-51
• /
• 2011

This study was performed to functional improvement by fermenting of SCB (Slurry Composting and Biofiltering) liquid fertilizer. After screening of cellulose decomposing test using microorganisms originated from composts produced with turf grass clipping, five kinds of Cellulose Decomposing Microorganisms (CDMs) were selected. The optimum medium for CDMs culture was Tryptic soy broth. The optimum fermenting time of CDMs in SCB liquid fertilizer was 36 hour. In addition, CDMs showed antimicrobial activity in vitro. Sclerotinia homoeocarpa, Rhizoctonia solani AG2-2(IV) and Pythium spp. were inhibited by CDMs, but Rhizoctonia solani AG2-2(IIIB) in vitro uneffected by CDMs we isolated.

• Progress in Superconductivity
• /
• v.10 no.2
• /
• pp.139-143
• /
• 2009

We have fabricated a low-noise 61-channel axial-type first-order gradiometer system for measuring fetal magnetocardiography(MCG) signals. Superconducting quantum interference device(SQUID) sensor was based on double relaxation oscillation SQUID(DROS) for detecting biomagnetic signal, such as MCG, magnetoencphalogram(MEG) and fetal-MCG. The SQUID sensor detected axial component of fetal MCG signal. The pickup coil of SQUID sensor was wound with 120 ${\mu}m$ NbTi wire on bobbin(20 mm diameter) and was a first-order gradiometer to reject the environment noise. The sensors have low white noise of 3 $fT/Hz^{1/2}$ at 100 Hz on average. The fetal MCG was measured from $24{\sim}36$ weeks fetus in a magnetically shielded room(MSR) with shielding factor of 35 dB at 0.1 Hz and 80 dB at 100 Hz(comparatively mild shielding). The MCG signal contained maternal and fetal MCG. Fetal MCG could be distinguished relatively easily from maternal MCG by using independent component analysis(ICA) filter. In addition, we could observe T peak as well as QRS wave, respectively. It will be useful in detecting fetal cardiac diseases.

• Korean Journal of Materials Research
• /
• v.21 no.4
• /
• pp.187-191
• /
• 2011

Prior austenite grain size plays an important role in the production of high strength hot-rolled steel. This study investigated the effect of Ti and C contents on the precipitates and prior austenite grain size. Steel with no Ti solutes had prior austenite grain size of about 620 ${\mu}m$. The addition of Ti ~ 0.03 wt.% and 0.11 wt.% reduced the prior austenite grain size to 180 ${\mu}m$ and 120 ${\mu}m$, respectively. The amount of Ti required to significantly decrease the prior austenite grain size was in the range of 0.03 wt.%. However, the amount of carbon required to significantly decrease the prior austenite grain size was not present from 0.04 wt.% to 0.12 wt.%. Oxides of Ti ($Ti_2O_3$) were observed as the Ti content increased to 0.03 wt.%. The specimen containing 0.11 wt.% of Ti exhibited the complex carbides of (Ti, Nb) C. The formation of Ti precipitates was critical to reduce the prior austenite grain size. Furthermore, the consistency of prior austenite grain size increased as the carbon and Ti contents increased. During the reheating process of hot-rolled steel, the most critical factor for controlling the prior austenite grain size seems to be the presence of Ti precipitates.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.191-191
• /
• 2008

강유전성 세라믹스 재료로써는 PZT계열의 세라믹재료가 널리 쓰이고 있다. 이는 우수한 유전 및 압전특성을 가지고 있으나, PbO을 다량 함유하고 있어 $1000^{\circ}C$이상에서 PbO가 급격하게 휘발되는 성질 때문에 조성의 변동이 생겨 재현성이 어려우며 이를 방지하기 위하여 PbO를 과잉 첨가시키기 때문에 PbO휘발로 인한 강한 독성이 인체에 유해하고, 비환경 친화적인 물질로 최근에는 환경문제가 대두됨에 따라 대체 또는 보완 할 수 있는 방안에 검토되고 있다. 본 연구는 그 해결책의 한 방안으로 압전특성이 우수한 $(Pb_{0.94}Sr_{0.06})[(Ni_{1/2}W_{1/2})_{0.02}(Mn_{1/3}Nb_{2/3})_{0.07}(Zr_{0.51}Ti_{0.49})_{0.91}]O_3$계 조성을 설계하고 Glass frit(0~1.1 wt%)를 소량 첨가하여 액상 소결 특성을 부여하고 $1000^{\circ}C$ 이하의 저온에서 소결하여 유전 및 압전 특성을 평가하였다. 실험방법은 일반적인 세라믹스 제조공정으로 24시간 ball milling하고 $850^{\circ}C$에서 2시간 하소 후 Glass frit를 소결조제로 소랑 첨가하여 $1000^{\circ}C$ 이하 온도에서 소결을 진행하여 각 소결온도에 따른 유전 및 압전 특성을 평가하였다. 최종 소결된 시편의 밀도와 수축율을 분석하여 최적의 소결온도를 확립하였으며 XRD분석을 통해 perovskite구조를 확인하고 미세구조확인을 위해 SEM으로 관찰하였다. 압전 특성을 평가하였다.