• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.176-180
• /
• 2002

During the last two decades the laser beam has progressed from a sophisticated laboratory apparatus to an adaptable and viable industrial tool. Especially, in its welding mode, the laser offers high travel speed, low distortion, and narrow fusion and heat-affected zones (HAZ). The principal obstacle to selection of a laser processing method in production is its relatively high equipment cost and the natural unwillingness of production supervision to try something new until it is thoroughly proven. The major objective of this work is focused on the combined features of gas tungsten arc and a low-power cold laser beam. Although high-power laser beams have been combined with the plasma from a gas tungsten arc (GTA) torch for use in welding as early as 1980, recent work at the Ohio State University has employed a low power laser beam to initiate, direct, and concentrate a gas tungsten arcs. In this work, the laser beam from a 7 watts carbon monoxide laser was combined with electrical discharges from a short-pulsed capacitive discharge GTA welding power supply. When the low power CO laser beam passes through a special composition shielding gas, the CO molecules in the gas absorbs the radiation, and ionizes through a process known as non-equilibrium, vibration-vibration pumping. The resulting laser-induced plasma (LIP) was positioned between various configurations of electrodes. The high-voltage impulse applied to the electrodes forced rapid electrical breakdown between the electrodes. Electrical discharges between tungsten electrodes and aluminum sheet specimens followed the ionized path provided by LIP. The result was well focused melted spots.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1995년도 제8회 학술발표회 논문개요집
• /
• pp.36-36
• /
• 1995

The cubic (zinc blende) CdSe eppilayers were grown on GaAs(100) substrates by electron beam (e-beam) evapporation technique. X-ray scans with copper $K\alpha$ radiation indicate that the CdSe eppilayers are zinc blende. The lattice pparameter obtained from the (400) reflection is 6.077$\AA$, which is in excellent agreement with the value repported in the literature for zinc blende CdSe. The orientation of as-grown CdSe eppilayer is determined by electron channeling ppatterns(ECpp). The crystallinity of heteroeppitaxial CdSe layers were investigated based on the double crystal x-ray rocking curve(DCRC). The deppendence of the rocking curve width on layer thickness was studied. The FWHM(full width at half maximum) of CdSe eppilayers grown on GaAs(100) substrates is decreasing with increasing eppilayer thickness. The carrier concentration and mobility of the as-grown eppilayers deduced Hall data by van der ppauw method, are about 7$\times$1017 cm-3 and 2$\times$102 $\textrm{cm}^2$ / sec at room tempperature, resppectively. The energy gapp was determinded from the pphotocurrent sppectrum. In pphotocurrent sppectrum of a 1-${\mu}{\textrm}{m}$-thick CdSe eppilayer at 30K, the ppeak at 1.746 eV is due to the free exciton of cubic CdSe. In summary, We have shown that eppilayers of zinc blende CdSe can be grown on GaAs(100) substrates by e-beam, desppite the large mismatch between eppilayer and substrate, as well as the natural ppreference for CdSe to form in the wurtzite structure.

• 한국전자통신학회논문지
• /
• 제5권6호
• /
• pp.575-580
• /
• 2010

본 연구는 야생동물의 도로 진입방지를 위한 시스템으로, 제안 시스템을 구성하고 있는 적외선 센서와 야생동물이 접근할 때 방지를 위한 발성부와 빛을 발생하는 발광부와 태양열을 이용하여 전원을 공급하는 전원공급부와 외부의 배터리를 이용한 전원공급부와 도로 가장자리에 경계를 알리는 나선에 미세 전류를 통하게 하여 경고 발성이나 발광효과를 극대화하도록 하여 접근하는 야생동물을 제지하는 시스템에 관한 것이다. 본 제안 시스템은 고속도로, 국도, 지방도와 같은 야생동물이 자주 출몰하는 도로 주변에 설치하여 주야간을 막론하고 출몰하는 야생동물의 진입을 방지하여 동물이 차량과 충돌하는 피해를 예방하며, 더불어 운전자를 보호하며 자연환경의 생태계를 보존하는데 있다.

• Tuberculosis and Respiratory Diseases
• /
• 제57권2호
• /
• pp.118-124
• /
• 2004

Lung cancer is the leading cause of cancer death for men and women in the industrialized world. It is desirable to detect disease at a stage when it is not causing symptoms and when control or cure is possible. If the screening test detects patients with the disease at an early stage, they can be examined to confirm the diagnosis and intervention can alter the natural history of the disease. The results of screening programs designed to detect early lung cancer using either conventional chest radiograph or sputum cytology are disappointing for a diagnostic screening test. Because of advances in helical CT imaging techniques, screening for lung cancer has been suggested as a possible method of improving outcome. Findings in recent publications suggest that substantial dose reduction is possible in chest CT. The advantages of low-dose CT are more sensitive than chest radiograph for detecting small pulmonary nodules that may be lung cancers, shorter scanning time than conventional chest CT scan without intravenous contrast injection, cheaper cost than standard CT, low radiation dose. However, the true clinical significance of the small tumors found by screening is still unknown, and their effect on mortality awaits future investigation. Furthermore, in addition to detecting an increased number of lung cancers, low-dose CT found at least one indeterminate nodule in many of all screened patients. The majority should be benign but evaluation of all these indeterminate nodules is not a trivial problem in routine practice. In conclusion, lung cancer screening with low-dose CT is a complex subject. The true effectiveness of lung cancer screening (a reduction in mortality from lung cancer) with low-dose CT can be determined through well-designed randomized control trials with enrolment of appropriate subjects.

• 한국전자파학회논문지
• /
• 제16권1호
• /
• pp.66-77
• /
• 2005

본 논문에서는 IMT-2000/WLAN/DMB 단말기용 광대역 PIFA(Planar Inverted-F Antenna)를 설계하였다. 일반적인 PIFA 구조의 단점인 협대역 특성을 개선하기 위하여 미앤더 라인을 두 개의 branch로 나누었다. 안테나의 크기를 효율적으로 줄이기 위하여 단락스트립을 사용하였고, 미앤더 형태에 따른 방사소자를 가지는 PIFA를 제안하였다. 설계 제작된 안테나의 -10 dB 반사손실 대역폭은 $38.2{\%}$(1.84~2.71 GHz)로 IMT-2000/WLAN/DMB 대역을 모두 만족하는 광대역 특성을 얻었다. 전자파 흡수율의 감소량을 알아보기 위해 실제로 폴더형 구조를 가지는 휴대폰에 제안된 안테나를 탑재하여 1 g 및 10 g 평균 첨두 SAR를 측정한 값과 시뮬레이션 결과를 비교하였다. 그 결과는 아주 유사하게 나왔으며, 1 g 및 10 g 평균 첨두 SAR 제한치인 1.6 W/kg, 2 W/kg보다 낮은 값을 얻었다.

• 한국수소및신에너지학회논문집
• /
• 제7권2호
• /
• pp.121-128
• /
• 1996

수소액화를 위한 직접냉각장치를 개발하고, 이의 성능특성을 시험하였다. 직접냉각장치는 액화용기, 복사쉴드, 저온조와 GM냉동기 등으로 구성하였다. 개발된 액화장치의 cool-down 및 warm-up특성이 상세하게 규명되었다. 본 냉각장치에서 냉각이 시작된지 약 45분 후, 액화용기내의 수소가 액화되기 시작함을 확인하였다. 또한 동일한 실험을 기체헬륨에 대하여 수행하였으며, 기체헬륨은 주어진 작동조건에서 액화되지 않으므로 수소의 경우와는 다른 cool-down 및 warm-up 특성을 보였다. 충전된 기체의 자연대류현상의 영향을 고찰하기 위하여 액화용기내에 진공상태를 유지하면서 시험하였다. 이때 진공상태에서의 액화용기의 냉각시간은 현저히 증가함을 보였다.

• 한국산업정보학회논문지
• /
• 제17권2호
• /
• pp.19-27
• /
• 2012

In railway tunnel environment, the reliability of a high-data-rate and real-time train-to-wayside communication should be maintained especially when high-speed train moves along the track. In China and Europe, the communication frequency around 900 MHz is widely used for railway applications. At this carrier frequency band, both of the solutions based on continuously laid leaky coaxial cable (LCX) and discretely installed base-station antennas (BSAs), are applied in tunnel radio coverage. Many available works have concentrated on the radio-wave propagation in tunnels by different kinds of prediction models. Most of them solve this problem as natural propagation in a relatively large hollow waveguide, by neglecting the transmitting/receiving (Tx/Rx) components. However, within such confined areas like railway tunnels especially loaded with train, the complex communication environment becomes an important factor that would affect the quality of the signal transmission. This paper will apply a full-wave numerical method to this case, for considering the BSA or LCX, train antennas and their interacted environments, such as the locomotive body, overhead line for power supply, locomotive pantograph, steel rails, ballastless track, tunnel walls, etc.. Involving finite-difference time-domain (FDTD) method and uni-axial anisotropic perfectly matched layer (UPML) technique, the entire wireless RF downlinks of BSA and LCX to tunnel space to train antenna are precisely modeled (so-called integrative modeling technique, IMT). When exciting the BSA and LCX separately, the field distributions of some cross-sections in a rectangular tunnel are presented. It can be found that the influence of the locomotive body and other tunnel environments is very significant. The field coverage on the locomotive roof plane where the train antennas mounted, seems more homogenous when the side-laying position of the BSA or LCX is much higher. Also, much smoother field coverage solution is achieved by choosing LCX for its characteristic of more homogenous electromagnetic wave radiation.

• 혜화의학회지
• /
• 제19권2호
• /
• pp.145-151
• /
• 2011

Backgrounds: Multidisciplinary approaches including surgery, chemotherapy, and radiation therapy are currently being performed to target various cancers in Western Medicine. However, some cancers still remain difficult to battle, which has long attracted many scientists for the discovery of new agents to fight cancers. Ginseng is one of the herbs used in Oriental Medicine including Korea, China and Japan. We have further investigated ginseng for its anticancer effect. Objective: This is a comprehensive review summary of anticancer effect of ginseng and ginsenoids as a possible agent for future cancer treatment. Methods: Data were retrieved from two web sites; www.pubmed.com and www.riss.kr, and authorized texts concerning anticancer effects of ginseng. From collected data, information on anticancer effect of ginseng was thoroughly sorted, restructured, then assessed. Results: Panax Ginseng C.A. Meyer belongs to Araliaceae Panax family, a perennial prairie plant with its root known as Ginseng Radix. Ginseng induces anticancer effect through cell cycle arrest, acceleration of apoptosis, anti-angiogenesis, and suppression of metastasis. Anticancer effect of ginseng may be due to single compound or multi-compound actions. Many studies report involvement of immune mechanisms of cytokines, Natural Killer (NK) cells, macrophages and some antibodies in enhancing anticancer effect of ginseng. In near future, possibility of applying these mechanisms into clinical trials is convinced. There were some important findings on saponin in ginsenoids in reviewing for this article; First, eradication of metastatic tumors were influenced by macrophage activation. Second, suppression of malignant melanoma cell metastasis to lung were induced by macrophage and NK cell activation in spleen with red ginseng acidic polysaccharide (RGAP). Third, final metabolites of M1, M4 had exerted anticancer effect of ginseng. Conclusion: Unknown anticancer mechanisms of ginseng have been studied for many years up until now. Ginseng is comprised of multiple bio-chemical compounds that create complex pharmaceutical interactions. Therefore, for its proper usage and safe prescription, studies on different types of ginseng and patients' susceptibility to ginseng according to their constitution and stages of the disease should be further pursued. More efforts are needed to understand the anticancer mechanisms of ginseng as well.

• 한국콘텐츠학회논문지
• /
• 제13권1호
• /
• pp.287-293
• /
• 2013

민들레는 한방에서 산화방지, 위장 점막 보호 및 담즙 등에 탁월한 효과가 있다고 알려져 있다. 민들레 잎과 뿌리에서 추출한 물질을 SD Rat에 투여한 후 10Gy 방사선 조사 후에 생존율, 혈액변화, 소장조직변화 및 간 조직 변화를 관찰하였다. 관찰결과 민들레 추출물을 투여한 실험군에서 생존율이 4배 이상 높았으며 백혈구, 혈소판 등의 혈액변화에서도 뚜렷한 차이가 보였다. 또한 소장 조직 관찰결과 소장점막세포 소멸 억제 및 소장 점막근판 조직의 염증과 공포가 감소되었다. 따라서 민들레 추출물이 방사선 조사에 따른 혈액구성세포와 소장 조직 손상에 대한 방사선 방호효과를 확인하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.153-153
• /
• 2017

The application of the coating supports the mechanical characteristics of the implant, and various materials and coatings are currently being used in the implant in a way to accelerate adhesion. Especially, plasma electrolytic oxidation (PEO) coating has been proposed continually with good surface treatment of titanium alloys. Also, the PEO process can incorporate Ca and P ions on the titanium surface through variables varied factor. PEO process for bioactive surface has carried out in electrolytes containing Ca and P ions. Natural bone is composed of mineral elements such as Mg, Si, Zn, Sr, and Mn, etc. Especially, Mg and Si of these elements play role in bone formation and growth after clinical implantation of bio-implants. In this study, corrosion charateristics of PEO-treated Ti-6Al-4V alloy in solution containing Si and Mg ions has been investigated using several experimental techniques. The PEO-treated surfaces were identified by X-ray diffraction, using a diffractometer (XRD, Philips X' pert PRO, Netherlands) with Cu $K{\alpha}$ radiation. The morphology was observed by field-emission scanning electron microscopy (FE-SEM, Hitachi 4800, Japan) and energy-dispersive X-ray spectroscopy (EDX, Oxford ISIS 310, England). The potentiodynamic polarization and AC impedance tests for electrochemical degradations were carried out in 0.9% NaCl solution at similar body temperature using a potentiostat with a scan rate of 1.67mV/s and potential range from -1500mV to + 2000mV.