• Food Science and Biotechnology
• /
• v.18 no.5
• /
• pp.1063-1070
• /
• 2009

Dangyuja (Citrus grandis Osbeck) is a native plant growing only on Jeju Island in Korea. In this study, antiinflammatory effect of dangyuja leaves on a murine macrophage cell line was investigated. RAW 264.7 murine macrophage cells were stimulated with lipopolysaccharide (LPS, $1{\mu}g/mL$) to induce expression of pro-inflammatory markers [interleukin (IL)-6 and inducible nitric oxide synthase (iNOS)]. The crude extract (80% MeOH Ex.) and solvent fractions (hexane, $CHCl_3$, EtOAc, BuOH, and $H_2O$ Ex.) were obtained from dangyuja leaves. The $CHCl_3$ fraction inhibited the nitric oxide (NO) and IL-6 production in a dose-dependent manner. Also, the $CHCl_3$ fraction inhibited mRNA expression and protein levels of iNOS in a dose-dependent manner. Furthermore, the $CHCl_3$ fraction inhibited LPS-induced nuclear factor (NF)-${\kappa}B$ activation and phosphorylation of mitogen-activated protein kinases (MAPKs: ERK, JNK, and p38). These results suggest that dangyuja leaves may inhibit LPS-induced production of inflammatory markers by blocking NF-${\kappa}B$ and MAPKs signaling in RAW 264.7 cells.

• Korean Journal of Food Science and Technology
• /
• v.22 no.5
• /
• pp.543-548
• /
• 1990

Volatile components of fresh apricot (Prunus armeniaca var. ansu Max.) were isolated by simultaneous distillation-extraction at two different pH values of 3.1 and 7.0 and by headspace trapping method. The volatiles were analyzed by GC and GC-MS. A total of 80 components were identified in the three aroma concentrates, including 9 naphthalene derivatives that were not previously reported in apricot. Of components identified in native pH (3.1) sample, the major components were aliphatic $C_6$ aldehydes and alcohols, monoterpene alcohols, benzyl alcohol, ${\beta}-phenylethyl$ alcohol and naphthalene derivatives, while those in neutral pH(7.0) sample and headspace volatiles were aliphatic $C_6$ aldehydes and alcohols. Simultaneous distillation-extraction at pH 3.1 was significantly increased the concentration of n-hexanal, trans-2-hexenal, cis-3-hexen-1-ol, linalool oxide, linalool, ${\alpha}-terpineol$, nerol, geraniol, benzyl alcohol, ${\beta}-phenylethyl$ alcohol and naphthalene derivatives. These results demonstrate that above the components are present in glycosidically bound forms in apricot.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.1
• /
• pp.103-112
• /
• 2023

This study selected 9 species of domestic native plants (Baechohyang, Red Pine, Turmeric, Ginger, San parsley seed, Bulsugam, Hwangchil, Tangja, Valerian) that have been proven effective for depression, and based on the analysis results of each fragrance component, 9 species were selected. Antioxidant (DPPH, ABTS), cytotoxicity (MTS), and anti-inflammatory (Nitric oxide) experiments were performed by combining essential oils. As a result of the analysis of fragrance components, DL-Limonene (38.44%), g-Terpinene (8.9%), Estragole (5.18%), and a-Pinene (1.73%), which were previously studied in combination oil, were identified. DPPH radical scavenging ability, which is an antioxidant activity, showed 75.4%, ABTS radical scavenging ability was 74.04%, and NO production inhibition was 33.14% at a concentration of 5uL/ml with no cytotoxicity confirmed. Through this, the effect of domestic blending essential oils on the improvement or prevention of depression is verified, and scientific efficacy and ingredient studies are conducted in a mutually cooperative manner to seek solutions to depression and provide basic data to confirm whether or not depressive symptoms are improved. want to do.

• Journal of Society of Preventive Korean Medicine
• /
• v.16 no.2
• /
• pp.113-124
• /
• 2012

The oxidative modification of low density lipoprotein(LDL) has been implicated in the development of atherosclerosis. Oxidized LDL(oxLDL) is captured into macrophage and stimulates to form macrophage foam cell. And it can induce an inflammation and smooth muscle proliferation in atherosclerotic plaque. Objective : In this study, we aimed to investigate the effect of Bupleuri radix(SH) on the foam cell formation, a critical initiation stage of atherosclerosis. Methods : To achieve the goal, we examined the effect of SH on LDL oxidation, nitric oxide production in RAW264.7, and the effect of SH on cupuric sulfate-induced cytotoxicity, LDH release, and macrophage activity. Results : SH inhibited the formation of oxidized LDL from native LDL in RAW264.7 cell culture, and decreased the release of LDH from cupric sulfate-stimulated RAW264.7 cell. In other experiments, SH activated RAW264.7 cell, and prolonged the survival time, and inhibited foam cell formation induced by oxLDL in Raw 264.7 cells. Conclusion : These results showed that SH might prevent atherosclerosis by controlling the early stages of foam cell formation.

• Korean journal of food and cookery science
• /
• v.18 no.4
• /
• pp.455-460
• /
• 2002

This experiment was conducted to obtain basic information on the natural spice of Elsholtzia splendens, which is one of the native Korean aromatic plants for aromatic, medicinal and ornamental uses. The overall acceptability and the masking effects on the fetid smell of beef were investigated with Elsholtzia splendens-flavored oils by sensory evaluation. The ability of an electronic nose with six metal oxide sensors to classify Elsholtzia splendens flavored oils based on their odors was studied. The response by electronic nose was analyzed by principal component analysis (PCA). In EOI, EOII, and ESI, (이것들이 무엇을 의미하는지 기술할 필요가 있음). overall acceptability of French dressing showed a same level of preference during storage. Fetid smell of beef was not changed by the addition of 4 types of Elsholtzia splendens-flavored oil during storage. In EO I -flavored oil, the proportion of 1st principal component was 0.829, and the proportion of 1st principal component was 0.818 in ESI-flavored oil. The PCA plot was used to detect stored Elsholtzia splendens flavored oils.(앞 뒤 문맥이 안맞음. 뒤에 이어지는 글이 있는지\ulcorner).

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.100-100
• /
• 2003

본 연구에서는 Si에 Mn을 첨가한 Si$_{l-x}$Mn$_{x}$ 박막의 전기적 및 자기적 특성을 조사하였다. Si$_{l-x}$Mn$_{x}$ 박막은 MBE(Molecular Beam Epitaxy)를 이용하여 native oxide층을 제거하지 않은 (100)Si wafer 위에 성장하였다. Substrate 온도는 50$0^{\circ}C$로 하였으며, 첨가한 Mn 농도는 20%에서부터 80%까지였다. 전기적 특성은 Hall, 4-point probe를 통하여 측정하였고, 자기적 특성은 VSM, FMR, SQUID을 이용하여 측정하였다. 상 분석은 XRD, TEM을 이용하여 관찰하였다 Si$_{l-x}$Mn$_{x}$ 박막은 Hall 측정 결과 상온에서 P-type carrier를 가지며, 비저항은 반도체 영역인 7.6$\times$$10^{-4}$~4.2$\times$$10^{-2}$(ohm-cm)의 값을 가진다. 상온 VSM, 측정결과 Mn의 양이 52% 첨가 시 포화 자화 값이 가장 높은 40emu/cc를 가지며, Mn의 양이 증가할수록 포화 자화 값이 증가하다 다시 감소하는 경향을 가진다. FMR, SQUID 측정에서도 이러한 경향을 확인할 수 있었다 특히, SQUID 분석 결과 두 개 이상의 자성 상이 존재하는 것을 관찰할 수 있었다. XRD, TEM 관찰결과, Si$_{l-x}$Mn$_{x}$은 poly crystal로 성장하였으며, Mn 농도에 따라 여러 상들이 관찰되었다.따라 여러 상들이 관찰되었다.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.832-834
• /
• 1992

Using the PECVD method, the silicon nitride films were deposited by changing the $SiH_4/NH_3$ gas flow ratio from 0.2 to 1.4 at an interval of 0.2, AES, FTIR, and Spectroscopic Ellipsomter were used to analyze the film composition and structure, the refractive index, and the deposition rate. Also the C-V analysis was used to estimate the memory performance in the capacitor type MNOS memory devices, which utilized native oxide as the tunneling barrier, with the silicon nitride by the above deposition conditions. As a result, it was confirmed that the performance of MNOS memory devices with PECVD silicon nitride was comparable to that with LPCVD or APCVD silion nitride.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1730-1733
• /
• 2007

As semiconductor and MEMS devices become smaller, testing process during their production should follow such a high density trend. A circuit inspection tool "probe card" makes contact with electrode pads of the device under test (DUT). Nowadays, electrode pads are irregularly arranged and have height difference. In order to absorb variations in the heights of electrode pads and to generate contact loads, contact probes must have some levels of mechanical spring properties. Contact probes must also yield a force to break the surface native oxide layer or contamination layer on the electrodes to make electric contact. In this research, new vertical micro contact probe with bellows shape is developed to overcome shortage of prior work. Especially, novel bellows shape is used to reduce stress concentration in this design and stopper is used to change the stiffness of micro contact probe. Variable stiffness can be one solution to overcome the height difference of electrode pads.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.1
• /
• pp.24-29
• /
• 2000

We propose a simple method to control the crystallization depth of amorphous silicon (a-Si) deposited by PECVD or LPCVD during the excimer laser annealing (ELA). Employing the new method, we have formed poly-Si/a-Si double film and fabricated a new poly-Si TFT with vertical a-Si offsets between the poly-Si channel and the source/drain of TFT without any additional photo-lithography process. The maximum leakage current of the new poly-Si TFT decreased about 80% due to the highly resistive vertical a-Si offsets which reduce the peak electric field in drain depletion region and suppress electron-hole pair generation. In ON state, current flows spreading down through broad a-Si cross-section in the vertical a-Si offsets and the current density in the drain depletion region where large electric field is applied is reduced. The stability of poly-Si TFT has been improved noticeably by suppressing trap state generation in drain region which is caused by high current density and large electric field. For example, ON current of the new TFT decreased only 7% at a stress condition where ON current of conventional TFT decreased 89%.

• Transactions of Materials Processing
• /
• v.13 no.4
• /
• pp.326-333
• /
• 2004

The nanoprobe based on lithography, mainly represented by SPM based technologies, has been recognized as a potential application to fabricate the surface nanosctructures because of its operational versatility and simplicity. However, nanoprobe based on lithography itself is not suitable for mass production because it is time a consuming method and not economical for commercial applications. One solution is to fabricate a mold that will be used for mass production processes such as nanoimprint, PDMS casting, and others. The objective of this study is to fabricate the silicon stamper for PDMS casting process by a mastless fabrication technique using the combination of nano/micro machining by Nanoindenter XP and KOH wet etching. Effect of the Berkovich tip alignment on the deformation was investigated. Grooves were machined on a silicon surface, which has native oxide on it, by constant load scratch (CLS), and they were etched in KOH solutions to investigate chemical characteristics of the machined silicon surface. After the etching process, the convex structures was made because of the etch mask effect of the mechanically affected layer generated by nanoscratch. On the basis of this fact, some line patterns with convex structures were fabricated. Achieved groove and convex structures were used as a stamper for PDMS casting process.