• Fashion & Textile Research Journal
• /
• v.10 no.1
• /
• pp.92-100
• /
• 2008

When designing protective clothing, there are something to be considered such as physiological feature of human body, acting range not to restrict physical activity, and effectiveness of material. Because the primary objective of protective clothing is to protect human body from danger and it is designed through complex designing process not likely general clothing design. However, current evaluation techniques-such as the ISO, the ASTM and the CEN, and KS-provide only the standard to evaluate the primary feature of material (testing, performance requirements, material specification, selection and application, test and care, and so on). There are no standard to evaluate influence for the human body while protective clothing put on. Especially, in Korea, there is KS to evaluate protective clothing, but it is partially translated version from ISO because of lack of core technology about this field. However, developed countries recognize it is new competitive means in the time of Global Standards and they are competing to make their own standard to global standard for the protective clothing. Therefore, it can be great opportunity for Korean clothing and textile industry to revitalize if focusing on research and development for protective clothing design based on physical activity of human body, fit evaluation technique and sizing which is currently no global standard for it and developing our standard to global standard.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.12
• /
• pp.1117-1126
• /
• 2013

The standard impact sources, standardized to rate the sound insulation performance of floor structure, should simulate well the real floor impact sources, which is very important to grade the floor structure then to establish counter plan to improve the performance of floor. Recently the tire, the standard heavyweight impact source, has been discussed that the impact force is too big to represent the real impact force. And researches have been carried on the applicability as a substitute or a supplementary. In addition, tapping machine, the standard lightweight impact source, is also questionable if it is representative of real lightweight impact source. This study aims to examine the similarity of standard impact sources with living impact sources, comparing the physical characteristics such as impact force, frequency contents and sound level. The result showed that the physical characteristics of standard impact sounds were somewhat different with that of living impact sounds, and the standard sources couldn't be verified from this result. Later subjective evaluation should be followed to compare how the physical differences make relationship with the subjective differences.

• Journal of Korean Society for Quality Management
• /
• v.47 no.2
• /
• pp.315-325
• /
• 2019

Purpose: The purpose of this study was to propose useful standards evaluation method using standards networks by analyzing the relationship between normative references citation information list. Methods: The collected data through the survey were analyzed using social network analysis. The measurement tools used for this study were divided into three dimensions such as certificate standard, normative reference and degree centrality. Results: The results of this study are as follows; regarding the influence of standard information, It is meaningful that the research using normative reference item among the bibliography information that the standard itself possesses. The analysis of social network analysis data of population standard, normative reference and the correlation analysis with sales, a variable representing actual utilization performance, suggested the importance of the standard and how to evaluate it. Conclusion: In prioritizing standard maintenance, more efficient management will be possible if centrality figures of standard network information are analyzed and used for standard maintenance.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.4
• /
• pp.63-72
• /
• 2012

The main objective of this study is to assess the compatibility between Korean ministry of environment (KME) standard and ISO (KS I ISO) standard for the determination of BTEX and TPH content in soil. We carried out comparison analysis for both methods using CRM and matrix spiked samples. In case of GC-MS analysis for BTEX, we got statistically (significance level: 0.05) the same results from KME standard (ES 07600.1) and ISO standard (KS I ISO 15009). However, it showed statistically (significance level: 0.05) different results when TPH was analyzed by KME standard (ES 07552.1) and ISO standard (KS I ISO 16703). To clarify the reason why both methods produced different results for TPH content, we also did some additional experiments in terms of differences in extraction, clean-up and target hydrocarbon range. Extraction with polar and non-polar compounds mixed solvent (acetone+n-heptane) of KS I ISO 16703 showed higher extraction efficiency than with only non polar solvent (dichloromethane) extraction of ES 07552.1 by about 9%. While column type clean-up of KS I ISO 16703 showed the reduction in TPH content between before and after clean-up, batch type of clean-up of ES 07552.1 did not show any changes in TPH content through clean-up process. The target hydrocarbon range of ES 07552.1 and KS I ISO 16703 is $C_8{\sim}C_{40}$ and $C_{10}{\sim}C_{40}$, respectively. From this point of view, kerosene and JP-8 contaminated soil showed higher RPD (relative producibility deviation) values between results by both method than that of lubricant or diesel contaminated soil. The higher content of hydrocarbon ($C_8{\sim}C_{10}$) in kerosene and JP-8 played an important role in increasing RPD values in addition to the effects caused by different solvents and clean-up method. Consequently, it was concluded that both methods (ES 07552.1 and KS I ISO 16703) were not compatible.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.1
• /
• pp.6-13
• /
• 2008

National standard system for calibrating current transformer(CT) up to primary current of 20,000A have been established. The system consists of 20,000 A AC high current source, CT comparator, standard CT, CT under test and CT burden. An AC high current is applied tn the primary windings of both the standard CT and the CT under test, and then the CT comparator measures the ratio error and the phase displacement by comparing the secondary currents of the two transformers. As a validity check for 20,000 A CT calibration system, the comparison with the two national standard institutes(NMIs) has been performed using same CTs. The comparison results of the CTs are consistent with those measured at two NMIs within 0.004 % for ratio error and 0.1 min for phase displacement in the primary current ranges of Ip = 10 - 20,000 A with a secondary current of Is = 5 A.

• IE interfaces
• /
• v.20 no.2
• /
• pp.177-185
• /
• 2007

e-Business in healthcare sector has been called e-Health, which is evolving into u-Health with advances of ubiquitous technologies. Seamless information sharing among health organizations is being discussed in many nations including USA, UK, Australia and Korea. Efforts for establishing the electronic health record (EHR) system and a nation-wide information sharing environment are called NHII (National Health Information Infrastructure) initiatives. With the advent of u-Health and progress of health information systems, information security issues in healthcare sector have become a very significant problem. In this paper, we analyze several issues on health information security occurring in u-Health environment and develop an information security standard for protecting health information. It is expected that the standard proposed in this work could be established as a national standard after sufficient reviews by information security experts, stakeholders in healthcare sector, and health professionals. Health organizations can establish comprehensive information security systems and protect health information more effectively using the standard. The result of this paper also contributes to relieving worries about privacy and security of individually identifiable health information brought by NHII implementation and u-Health systems.

• Communications for Statistical Applications and Methods
• /
• v.20 no.2
• /
• pp.137-145
• /
• 2013

The use of pooled standard deviation can reduce the efficiency loss in optimum allocation when strata standard deviations are estimated and several of them are equal. Also shown is that the pooled standard deviation is useful in optimum allocation under a multivariate setting. In addition to theoretical development, we provide the result of simulation study to support the theory.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.02a
• /
• pp.226.2-226.2
• /
• 2009

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.7
• /
• pp.39-46
• /
• 2023

The purpose of this study is to design and develop the test standard to measure AI literacy abilities. First, we selected key areas of AI literacy through the related studies and expert FGI and designed detailed standard. The area of the test standard is divided into three categories: AI concept, practice, and impact. In order to confirm the validity of the test standard, we conducted twice expert validity tests and then modified and supplemented the test index. To confirm the validity of the test standard, we conducted an expert validity test twice and then modified and supplemented the test standard. The final AI literacy test standard consisted of a total of 30 questions. The AI literacy test standard developed in this study can be an important tool for developing self-checklists or AI competency test questions for measuring AI literacy ability.

• The korean journal of orthodontics
• /
• v.23 no.3 s.42
• /
• pp.405-414
• /
• 1993

Among the radiographs for temporomandibular joint, transcranial radiograph is widely used for screening and diagnosing temporomandibular disorder because it has sharp image and it is easy to take. This study was performed to compare condylar position and image sharpness in standard and individually corrected transcranial radiographs using Accurad-200 headholder. Submentovertex view, Reverse-Towne view, Standard and individually corrected transcranial radiographs of 45 university students who were randomly selected were traced, measured and analyzed. The results were as follows : 1. The means of condylar axes and lateral slopes were $16.8^{\circ}\;and\;22.5^{\circ}$ respectively. There were no differences between male and female or right and left side. 2. Individually corrected radiographs showed smaller posterior joint ,space and larger anterior joint space than standard radiographs, but superior joint space did net show a statistical difference between standard and individually corrected radiographs. 3. While a large number$(42.2\%)$ of the standard radiographs showed concentric condylar position, lots of(57.8) condylar positions were retropositioned in the individually corrected radiographs. 4. The image sharpness was inferior in the individually corrected radiographs to that of the standard radiographs.