• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.2_2
• /
• pp.415-424
• /
• 2024

This study analyzes trends and characteristics of the machine tool remanufacturing industry and proposes a standard process that considers environmental impact assessment during the remanufacturing process. First, trends in remanufacturing and environmental regulations are reviewed. And the current status of the machine tool remanufacturing industry and cases of national R&D projects related to machine tools are analyzed. Machine tool remanufacturing has a high resource saving effect, and remanufacturing is carried out as a finished product rather than as a part. And the scope of remanufacturing work is very wide due to the performance improvement of the machine and the addition of features. In order for the machine tool remanufacturing industry to be competitive, it is necessary to create products with high added value. In addition, in order to respond to international environmental regulations, it is necessary to secure related data by conducting an environmental impact assessment together during remanufacturing.

• Journal of Powder Materials
• /
• v.19 no.4
• /
• pp.264-270
• /
• 2012

In this study, we mainly focus on the study of densification of gas-atomized Cu-50 wt.%In-13 wt.%Ga alloy powder without occurrence of crack during the forming process. Cu-50 wt.%In-13 wt.%Ga alloy powder was consolidated by sintering and rolling processes in order to obtain high density. The phase and microstructure of formed materials were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM) and optical microscopy (OM), respectively. Warm rolling using copper can result in the improvement of density. The specimen obtained with 80% of rolling reduction ratio at $140^{\circ}C$ using cooper can have the highest density of $8.039g/cm^3$.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.391-394
• /
• 2004

In this study, highly thermal stable Ni Germanosilicide has been utilized using NiPt alloy and novel NiPt/Co/TiN tri-layer. And, the Ni Germanosilicide Properties were characterized according to different Ge ratio (x) in $Si_{l-x}Ge_x$ for the next generation CMOS application. The sheet resistance of Ni Germanosilicide utilizing pure-Ni increased dramatically after the post-silicidation annealing at $600^{\circ}C$ for 30 min. Moreover, more degradation was found as the Ge fraction increases. However, using the proposed NiPt/Co/TiN tri-layer, low temperature silicidation and wide range of RTP process window were achieved as well as the improvement of the thermal stability according to different Ge fractions by the subsequent Co and TiN capping layer above NiPt on the $Si_{l-x}Ge_x$. Therefore, highly thermal immune Ni Germanosilicide up to $600^{\circ}C$ for 30 min is utilized using the NiPt/Co/TiN tri-layer promising for future SiGe based ULSI technology.

• Journal of the Korea Convergence Society
• /
• v.13 no.1
• /
• pp.31-42
• /
• 2022

The purpose of this study is to analyze the reference data of the National R&D Report database built by the Korea Institute of Science and Technology Information(KISTI) to derive problems and to find complementary points for the construction technical items in the system. To this end, we investigated the descriptions of references in the National R&D Report constructed in the KISTI DB and analyzed the construction process, guidelines, types, items, etc. Based on this, the appropriateness and accuracy of the classification results of the reference types constructed with the DB were checked. As a result, the problems of the items built into the system and corrections to the construction guidelines were derived. Through this, database construction can proceed efficiently and data quality is expected to improve. In addition, a follow-up study was proposed on the convergence service plan that can be provided in the future through standardization of technical regulations.

• Journal of Animal Environmental Science
• /
• v.17 no.3
• /
• pp.197-204
• /
• 2011

During the process of anaerobic digestion, hydrolysis of substrate is the key factor determining methane production efficiency. The hydrolysis efficiency are directly affected by biodegradability of substrate. In this study, three types of pre-treatment methods were tested to enhance biodegradability effectiveness. By the application of blender and the Cavitation treatment, the SCODcr increased from 24,723 mg/l to 24.726~29,175 mg/l and to 25,589~26,456 mg/l, respectively. In case of ozone treatment, the SCODcr decreased from 24,723 mg/l to 22.540~23,988 mg/l. In batch experiment, there was a little improvement of the biochemical methane potential (BMP) by the blender and the cavitation treatment. In contrast, the BMP somewhat decreased by ozone treatment. This result shows that higher anaerobic digestion efficiency of livestock manure could be obtained through pre-treatment of substrate.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.4
• /
• pp.9-15
• /
• 2013

An oxidized starch ester was prepared and used for surface sizing. Esterification of starch decreased both Brookfield viscosity and Brabender viscosity substantially even though the solids level was increased by 2% from 14% to 16%. Surface sizing with the esterified starch gave better performance in tensile strength, stiffness and compressive strength than surface sizing with oxidized starch in the laboratory. Advantages in strength improvement, however, were not obtained when it was applied in commercial papermaking process. This was attributed to the fact that the influence of starch types has been nullified by high pressure penetration that occurs in the commercial papermaking process. Drying energy consumption, however, decreased by 3.3% by substituting the low solids oxidized starch with a high solids starch ester.

• Korean Journal of Clinical Pharmacy
• /
• v.29 no.1
• /
• pp.45-55
• /
• 2019

Background: Although the importance of pharmaceutical care service has been growing to meet the needs of customers with the improvement of clinical and humanistic outcomes, there was not a systematic strategy to promote research in Korea. The aim of this study was to suggest the core agendas for pharmaceutical care services research and development (R&D) considering priorities. Methods: Based on desk researches, we developed R&D agendas for the needs of improving pharmaceutical care services in the area of institution, community, and public health. To determine the priority of agendas in developing pharmaceutical care service, analytic hierarchy process (AHP) analysis was performed by the 14 experts. Criteria and subcriteria were assessed for significance by pairwise comparisons. Then, agendas were evaluated for importance according to each subcriteria, and rank ordered considering the weight calculated by multiplying the importance scores of the criteria and the subcriteria. Results: We derived 25 agendas including 13 for institutional pharmaceutical care service, 8 for community pharmaceutical care service, and 4 for public-health related pharmaceutical care service. AHP model was constructed based on 4 criteria and 8 subcriteria by a hierarchical structure. From the AHP survey, the 'Development of pharmaceutical care service for metabolic and chronic disease' agenda accounted for the highest priority. Conclusion: We have developed the R&D agendas of the pharmaceutical care service which should be promoted. The results should be utilized by the government to nationally support the development of the standards and relevant regulations related to pharmaceutical care services in Korea.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.607-610
• /
• 2005

In this paper, Ni Germanosilicide using Ni-Ta/Co/TiN is proposed to improve thermal stability. The sheet resistance of Ni Germanosilicide utilizing pure Ni increased dramatically after the post-silicidation annealing at $600^{\circ}C$ for 30min. However, using the proposed Ni-Ta/Co/TiN structure, low temperature silicidation and wide range of RTP process window were achieved.

• Journal of the Korean Ceramic Society
• /
• v.44 no.5 s.300
• /
• pp.141-143
• /
• 2007

Nanotubes and microtubes of ferroelectric lead zirconate titanate (PZT) were synthesized by means of a simple and convenient process called a template-wetting process. Nanoporous alumina and macroporous Si were used as template materials to fabricate the corresponding tubes. For the improvement of the wetting properties of the wetting solution, the PZT solution was mixed with a polymer. The polymer was removed completely during annealing. The grain growth processes of the PZT nanotubes during baking and furnace annealing were examined by means of field emission electron microscope (FE-SEM) and X-ray diffractometry (XRD).

• Design & Manufacturing
• /
• v.10 no.1
• /
• pp.31-35
• /
• 2016

In sheet metal forming process, drawing is typical process. And the key factor of drawing is blank holding force (BHF) A low BHF can cause wrinkling, whereas a high BHF can cause fracture during a deep drawing process. Thus, formability can be influenced by application appropriate BHF. In this study, a variable blank holding force (VBHF) is applied to extend the forming limit by avoiding both wrinkling and fracture. To determine VBHF in drawing process, numerical simulations and statistical analysis are carried out using commercial FEM software.