• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1069-1072
• /
• 2003

Ultraviolet-nanoimprint lithography (UV-NIL) is a promising nanoimprint method for cost-effectively defining nanometer scale structures at room temperature and low pressure. Nanostamp fabrication technology is a key technology for UV-NIL because fabricating a high resolution nanostamp is the first step for defining high resolution nanostructures in a substrate. We used quartz as an UV transparent stamp material for the UVNIL. A $5{\times}5{\times}0.09$ inch stamp was fabricated using the quartz etch process in which Cr film was used as a hard mask for transferring nanostructures into the quartz. In this paper, we describe the quartz etching process and discuss the results including SEM images.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.3835-3840
• /
• 2012

Nanoimprint lithography (NIL) is an emerging technology enabling cost-effective and high-throughput nanofabrication. Recently a lot of research for the nanoimprint have been carried out, but almost are about merely experimental result relating to the material operation and the imprint fabrication, and numerical analysis relating to the understanding of the imprint process with R&D level. In this paper, the viscoelasticity analysis model is developed using the finite element method. With this model, the filling process and residual layer formation in nanoimprint are analyzed, which is evaluated by a nanoimprint experiment.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.2
• /
• pp.74-80
• /
• 2016

This study presents a thermal device specially designed for thermal nanoimprint lithography equipments, which requires the capability of rapid heating and cooling, high temperature uniformity and the material strength to endure high stamping pressure. The proposal to meet these requirements is a planar-type hot plate extensible to a large area, in which long circular cartridge heaters and heat pipes are installed inside in parallel. The heat pipes are connected to the outside water cooling chamber. A hot plate made of stainless steel is fabricated with a dimension $240mm{\times}240mm{\times}20mm$. Laboratory experiments are conducted to examine the thermal performance of the hot plate. The results illustrate that the employment of heat pipes leads to a notable enhancement of temperature uniformity in the device and provides an efficient heat delivery from the hot plate to outside. It is verified that the suggested hot plate could be a feasible thermal tool for thermal nanoimprint lithography, satisfying the major design requirements.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.493-494
• /
• 2010

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1119-1120
• /
• 2007

Nano-sized metal patterns were successfully fabricated on flexible PET substrate using nanoimprint lithography. 70nm line and space PMMA resist pattern was formed on PET substrate without residual layer by 'artial filling effect' and 20nm thin Cr metal layer was deposited by e-beam evaporation. Then, PMMA resist was selectively removed by acetone and 70nm narrow Cr pattern was formed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.491-492
• /
• 2006

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.127-127
• /
• 2008

The replica of highly ordered nano-sphere array patterns were fabricated using hot embossing method. The polymer replica was coated with silcon dioxide layer and self-assembled monolayer. Using UV nanoimprint lithography with the template, highly ordered nano-sphere array patterns were clearly fabricated on curved substrate.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.24-25
• /
• 2007

Nano-sized metal patterns were successfully fabricated on flexible PET substrate using nanoimprint lithography. 70nm line and space PMMA resist pattern was formed on PET substrate without residual layer by "partial filling effect' and 20nm thin Cr metal layer was deposited by e-beam evaporation. Then, PMMA resist was selectively removed by acetone and 70nm narrow Cr pattern was formed.

• Journal of the Korean institute of surface engineering
• /
• v.42 no.2
• /
• pp.59-62
• /
• 2009

Antireflection pattern, moth-eye structure, was fabricated on lens using Ultra Violet nanoimprint lithography and flexible template. Ni template with conical shaped structure was used as a master template to molding. The flexible poly vinyl alcohol template was fabricated by molding. This poly vinyl alcohol template was used as an imprint template of imprint at lens. Using Ultra Violet nanoimprint lithography and poly vinyl alcohol template, polymer based moth-eye structure was formed on lens and its transmittance was increased up to 94% from 92% at 550 nm wavelength.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.1
• /
• pp.68-75
• /
• 2009

A major disadvantage of thermal nanoimprint lithography(NIL) is the thermal cycle, that is, heating over glass transition temperature and then cooling below it, which requires a significant amount of processing time and limits the throughput. One of the methods to overcome this disadvantage is to make the processing temperature lower Accordingly, it is necessary to determine the effects on the processing parameters for thermal NIL at reduced temperatures and to optimize the parameters. This starts with a clear understanding of polymer material behavior during the NIL process. In this work, the squeezing and filling of thin polymer films into nanocavities during the low temperature thermal NIL have been investigated based upon a two-dimensional viscoelastic finite element analysis in order to understand how the process conditions affect a pattern quality; Pressure and initial polymer resist thickness dependency of cavity filling behaviors has been investigated.