• 한국분말재료학회지
• /
• 제26권6호
• /
• pp.455-462
• /
• 2019

ZrB₂ ceramic and ZrB₂ ceramic composites with the addition of SiC, WC, and SiC/WC are successfully synthesized by a spark plasma sintering method. During high-temperature oxidation, SiC additive form a SiO₂ amorphous outer scale layer and SiC-deplete ZrO₂ scale layer, which decrease the oxidation rate. WC addition forms WO₃ during the oxidation process to result in a ZrO₂/WO₃ liquid sintering layer, which is known to improve the anti-oxidation effect. The addition of SiC and WC to ZrB₂ reduces the oxygen effective diffusivity by one-fifth of that of ZrB₂. The addition of both SiC and WC shows the formation of a SiO₂ outer dense glass layer and ZrO₂/WO₃ layer so that the anti-oxidation effect is improved three times as much as that of ZrB₂. Therefore, SiC- and WC-added ZrB₂ has a lower two-order oxygen effective diffusivity than ZrB₂; it improves the anti-oxidation performance 3 times as much as that of ZrB₂.

• Elastomers and Composites
• /
• 제46권2호
• /
• pp.112-117
• /
• 2011

고기능 포장재료를 포함한 고차단성 소재산업은 국민소득 증가 및 웰빙 문화와 함께 성장성이 높은 산업으로 성장할 것으로 예상된다. 따라서 최근 고차단성 소재로 기존의 소재와 비교하여 우수한 물성을 나타내는 고분자 나노복합재료에 대한 관심이 크게 증가하고 있다. 고분자 나노복합재료는 고분자 수지와 나노 크기의 충전제로 이루어진 소재를 의미하며, 이에 사용되는 무기 충전제는 층상 실리케이트, 탄소나노튜브, 금속 또는 무기물의 나노입자 등 다양한 물질들이 사용되고 있다. 현재 가장 활발히 적용되고 있는 입자는 다른 나노크기의 충전제와 달리 자연에 풍부하게 존재하며 경제적이고 나노 구조적인 특성을 잘 지닌 층상 실리케이트, 즉 점토(Clay)이다. Clay를 이용한 고분자 나노복합재료는 강도 향상, 난연성, 가스 차단성, 내마모성, 저수축화 등의 장점이 있어서 자동차 소재 및 포장재 등에 우선적으로 적용되고 있다. 따라서 본고에서는 가스차단 소재의 필요성과 더불어 관련 소재 및 기술에 대하여 중심으로 살펴보도록 하겠다.

• 한국재료학회지
• /
• 제20권9호
• /
• pp.472-477
• /
• 2010

$Al_2O_3$ has received wide attention with established use as a catalyst and growing application in structural or functional ceramic materials. On the other hand, the boehmite (AlO(OH)) obtained by sol-gel process has exhibited a decrease in surface area during phase transformation due to a decline in surface active site at high temperature. In this work, $Al_2O_3$-CuO/ZnO (ACZ) and $Al_2O_3$-CuO/CeO (ACC) composite materials were synthesized with aluminum isopropoxide, copper (II) nitrate hemi (pentahydrate), and cerium (III) nitrate hexahydrate or zinc (II) nitrate hexahydrate. Moreover, the Span 80 as the template block copolymer was added to the ACZ/ACC composition to make nano size particles and to keep increasing the surface area. The ACZ/ACC synthesized powders were characterized by Thermogravimetry-Differential Thermal analysis (TG/DTA), X-ray Diffractometer (XRD), Field-Emmision Scanning Electron Microscope (FE-SEM), Bruner-Emmett-Teller (BET) surface analysis and thermal electrical conductivity (ZEM-2:M8/L). An enhancement of surface area with the addition to Span 80 surfactant was observed in the ACZ powders from 105 $m^2$/g to 142 $m^2$/g, and the ACC powders from 103 $m^2$/g to 140 $m^2$/g, respectively.

• The Journal of Advanced Prosthodontics
• /
• 제10권2호
• /
• pp.101-112
• /
• 2018

PURPOSE. The purpose of this study was to investigate the effect of various surface treatments (ST) on the shear bond strength of resin composite to three bilayer dental ceramics made by CAD/CAM and two veneering ceramics. MATERIALS AND METHODS. Three different bilayer dental ceramics and two different veneering ceramics were used (Group A: IPS e.max CAD+IPS e.max Ceram; Group B: IPS e.max ZirCAD+IPS e.max Ceram, Group C: Vita Suprinity+Vita VM11; Group D: IPS e.max Ceram; Group E: Vita VM11). All groups were divided into eight subgroups according to the ST. Then, all test specimens were repaired with a nano hybrid resin composite. Half of the test specimens were subjected to thermocycling procedure and the other half was stored in distilled water at $37^{\circ}C$. Shear bond strength tests for all test specimens were carried out with a universal testing machine. RESULTS. There were statistically significant differences among the tested surface treatments within the all tested fracture types (P<.005). HF etching showed higher bond strength values in Groups A, C, D, and E than the other tested ST. However, bonding durability of all the surface-treated groups were similar after thermocycling (P>.00125). CONCLUSION. This study revealed that HF etching for glass ceramics and sandblasting for zirconia ceramics were adequate for repair of all ceramic restorations. The effect of ceramic type exposed on the fracture area was not significant on the repair bond strength of resin composites to different ceramic types.

• 한국주조공학회지
• /
• 제29권2호
• /
• pp.64-69
• /
• 2009

In the present study the effect of cooling rate during solidification on the microstructural characteristics of Al-xAg (x = 31, 33, 35 at.%) in-situ binary eutectic composites has been investigated. To provide a wide range of cooling rate three different casting techniques, i.e. conventional casting, injection casting, and melt spinning have been used. The observed microstructure is very much dependent on the cooling rate. The fcc ${\alpha}$-Al and hcp $Ag_2Al$ phases exhibits an orientation of (111)Al//(0001)$Ag_2Al$, [1-10]Al//[11- 20]$Ag_2Al$. The microstructure of the melt-spun samples contains Widmanstatten structure resulting from solid-state transformation and nano scale two-phase structure resulting from solid-state phase separation. The microstructure of injection-cast samples contains eutectic structure and solid state phase-separated structure. On the other hand, conventional-cast samples exhibit a microstructure consisted of plate-type eutectic structure.

• Composites Research
• /
• 제29권5호
• /
• pp.243-248
• /
• 2016

열경화성 탄소 섬유 복합재료 분리판은 높은 기계적 특성뿐만 아니라 높은 내산성을 갖으나, 높은 제조단가 및 낮은 자체저항이 극복해야 할 가장 큰 장애물이다. 따라서 본 연구에서는, 열가소성 폴리머를 복합재료 분리판의 기지로 적용하여 분리판 생산성과 자체저항이 모두 증가된 열가소성 탄소 복합재료 분리판을 개발하였다. 전기 전도도 및 기계 강도를 증가시기키 위하여 평직 형태의 탄소 섬유 직물을 사용하였으며, 분리판의 자체 저항을 감소시키기 위하여 전도성 나노입자를 열가소성 기지에 혼합하였다. 개발된 분리판의 면적 비저항 및 기계물성을 고온 연료전지 작동 온도 및 스택의 체결압에 따라 측정하였다.

• Composites Research
• /
• 제32권6호
• /
• pp.388-394
• /
• 2019

그래핀의 저차원 구조에서 기인하는 우수한 전기적/기계적 특성을 지닌 3차원 그래핀 나노 구조체는 높은 다공성과 비표면적을 가지고 있기 때문에 전기화학 에너지 저장 전극 물질로 각광을 받고 있다. 또한 도파민은 카테콜아민 구조를 갖고 있어 다양한 유무기 재료와의 결합력이 뛰어나고, 소수성 재료를 친수성으로 개질시킬 수 있는 다기능 소재이다. 이에 본 연구에서는 도파민을 3차원 그래핀 나노 구조체에 코팅하여, 전해질과의 젖음성을 증대시켜 전기화학 전극의 비축전용량을 개선하고, 3차원 나노 네트워크 간 결합력을 올려 기계적 압축 특성을 증가시키고자 하였다. 연구 결과, 도파민이 코팅된 3차원 그래핀 나노 구조체는 전기화학 비축전용량이 51.5%, 압축 응력은 59.6%로 증가하는 높은 개선 효과를 나타내었다.

• 대한기계학회논문집A
• /
• 제32권11호
• /
• pp.1003-1009
• /
• 2008

In this study, liquid phase sintered SiC (LPS-SiC) materials were made by hot pressing method. The particle size of nano-SiC powder was 30nm. Alumina ($Al_2O_3$), yttria ($Y_2O_3$) and silica ($SiO_2$) were used for sintering additives. To investigate effects of $SiO_2$, ratios of $SiO_2$ contents were changed by five kinds. Materials have been sintered for 1 hour at $1760^{\circ}C$, $1780^{\circ}C$ and $1800^{\circ}C$ under the pressure of 20MPa. The system of sintering additives which affects a property of sintering as well as the influence depending on compositions of sintering additives were investigated by measurement of density, mechanical properties such as flexural strength, vickers hardness and sliding wear resistance were investigated to make sure of the optimum condition which is about matrix of $SiC_f$/SiC composites. The abrasion test condition apply to load of 20N at 100RPM for 20min. Sintered density, flexural strength of fabricated LPS-SiC increased with increasing the sintering temperature. And in case of LPS-SiC with low $SiO_2$, sliding wear resistance has very excellent. Monolithic SiC $1800^{\circ}C$ sintering temperatures and 3wt% have excellent wear resistance.

• 한국염색가공학회지
• /
• 제26권2호
• /
• pp.88-98
• /
• 2014

This study is to assess the photocatalytic degradation of PET and Nylon 6 films containing nano-sized $TiO_2$ powders of anatase and rutile types. The PET and Nylon 6 films containing six kinds of the nanoparticles were prepared by melt casting method using a heating press machine. Reflectance in visible region and water contact angles of the irradiated PET and Nylon 6 composite films decreased with increasing UV/$O_3$ irradiation. Also the enhanced hydrophilicity has a close relationship with the increase in the Lewis base parameter, which indicates more oxidized polymer surfaces. The photocatalytic degradation of the nanocomposite films increased with increasing $TiO_2$ content and UV energy, which is more significant with the anatase types rather than the rutile types. The amide linkages in the Nylon 6 seemed to be more susceptible to the UV light compared to the ester groups in the PET, particularly in the presence of the $TiO_2$ photocatalysts. The photoscission and photodegradation of the polymers in the composites produced more degraded structure assisted by the photocatalytic activity of the $TiO_2$ nanoparticles. Also the composite films can bleach the methylene blue dyes more easily under the UV/$O_3$ irradiation, suggesting the photobleaching activity of the $TiO_2$ nanoparticles.

• 공업화학
• /
• 제23권3호
• /
• pp.271-278
• /
• 2012

본 연구에서는 마이카와 산화 아연을 이용하여 복합 재료를 제조하고, 이를 자외선 차단 크림에 응용하는 연구를 수행하였다. 먼저 마이카와 산화 아연을 각각 3-aminopropyltrimethoxysilane (APTMS)으로 처리하여 표면에 아민기를 생성시켰다. 아민기가 붙은 마이카를 1,4-phenylenediisothiocyanate (PDC)와 반응시켜 표면에 -N=C=S 작용기를 활성화시킨 후, 아민기가 붙어있는 산화 아연과 결합시켜 산화 아연으로 덮인 마이카 복합 재료를 합성하였다. 원소 분석, EDS 분석, 열 중량 분석, SEM 이미지 분석, 형광 이미지 분석, 제타 전위 측정, X-선 회절 분석, DRS UV/Vis 분석을 통하여 고체 생성물의 특성을 규명하였다. 최종적으로 표준 프로토콜로 제조된 자외선 차단 크림의 파장에 따른 투과도를 280~400 nm 범위에서 측정하여 자외선 차단 효과를 확인하였다.