Browse > Article
http://dx.doi.org/10.3795/KSME-A.2008.32.11.1003

Wear Characteristics of SiC by Sintered Temperature and SiO2 Contents  

Park, Sung-Ho (경상대학교 대학원 정밀기계공학과)
Park, Won-Jo (경상대학교 기계항공공학부, 해양산업연구소)
Yoon, Han-Ki (동의대학교 기계공학과)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.32, no.11, 2008 , pp. 1003-1009 More about this Journal
Abstract
In this study, liquid phase sintered SiC (LPS-SiC) materials were made by hot pressing method. The particle size of nano-SiC powder was 30nm. Alumina ($Al_2O_3$), yttria ($Y_2O_3$) and silica ($SiO_2$) were used for sintering additives. To investigate effects of $SiO_2$, ratios of $SiO_2$ contents were changed by five kinds. Materials have been sintered for 1 hour at $1760^{\circ}C$, $1780^{\circ}C$ and $1800^{\circ}C$ under the pressure of 20MPa. The system of sintering additives which affects a property of sintering as well as the influence depending on compositions of sintering additives were investigated by measurement of density, mechanical properties such as flexural strength, vickers hardness and sliding wear resistance were investigated to make sure of the optimum condition which is about matrix of $SiC_f$/SiC composites. The abrasion test condition apply to load of 20N at 100RPM for 20min. Sintered density, flexural strength of fabricated LPS-SiC increased with increasing the sintering temperature. And in case of LPS-SiC with low $SiO_2$, sliding wear resistance has very excellent. Monolithic SiC $1800^{\circ}C$ sintering temperatures and 3wt% have excellent wear resistance.
Keywords
LPS-SiC; Sintering Temperature; Sintering Additives; Vickers Hardness; Friction Coefficient;
Citations & Related Records

Times Cited By SCOPUS : 0
연도 인용수 순위
  • Reference
1 Kaya, H., 1999, "The Application Of Ceramic-Matrix Composites To The Automotive Ceramic Gas Turbine," Composites Science and Technology, Vol. 59, pp. 861 ~ 872   DOI   ScienceOn
2 Snead, L. L., Jones, R. H., Kohyama, A. and Fenici, P., 1996, "Status of Silicon Carbide Composites For Fusion," Journal of Nuclear Materials, Vol. 233-237, pp. 26~36   DOI   ScienceOn
3 Raffray, A. R., Jones, R., Aiello, G., Billone, M., Giancarli, L., Golfier, H., Hasegawa, A., Katoh, Y., Kohyama, A., Nishio, S., Riccardi, B. and Tillack, M. S., 2001, "Design and Material Issues For High Performance SiCf/SiC-Based Fusion Power Cores," Fusion Engineering and Design, Vol. 55, pp. 55~95   DOI   ScienceOn
4 Ohring, M., Engineering Materilas Science (Academic Press, USA 1995).
5 Yano, T., Park, D. C., Horie, Y., Inoue, H., Katayama, K. and Iseki, T., Key Eng. Mater. Vol. 247(2003), p. 165   DOI
6 Ren, J. R., Kim, K. H. and Kim, S. S., 2001, "Tribological Evaluation of Dental Composite ResinsContaining Prepolymerized Particle Fillers," KSME International Journal, Vol. 15 No. 6, pp. 727~734   과학기술학회마을
7 Sato, K., Tezuka, A., Funayama, O., Isoda, T., Terada, Y., Kato, S. and Iwata, M., 1999, "Fabrication and Pressure Testing Of A Gas-Turbine Component Manufactured By A Preceramic-Polymer-Impregnation Method," Composites Science and Technology, Vol. 59, pp. 853 ~ 859   DOI   ScienceOn
8 Park, S. H., Shin, D. I., Park, W. J., Lee, K. Y., Huh, S. C., 2003, "A Study on Fraction and Wear Properties of $MoSi_2$ Composites," KSME Spring Annual Meeting. pp. 175~180