• Journal of Fashion Business
• /
• v.25 no.5
• /
• pp.99-113
• /
• 2021

This study aimed to produce sensors for measuring thigh motor skills. A textile stretch sensor was manufactured using a CNT(Carbon Nano Tube) 0.1 wt% water SWCNT(Single-Walled Carbon Nano Tube) solution, and different designs were applied to increase the sensitivity of the sensor, and different GF(Gauge Factor) values were compared using UTM devices. The same design was applied to fabrics and weaves to observe changes in performance according to fibrous tissue, and the suitability of sensors was determined based on tensile strength, elongation, and the elongation recovery rate. Sensitivity was found to vary depending upon the design. Thus the manufactured sensor was attached to a pair of fitness pants as a prototype, divided into lunge position and squat position testing, and the stretch sensor was used to measure thigh movements. It was shown that stretch sensors used to measure thigh motor skills should have light and flexible features and that elongation recovery rates and tensile strength should be considered together. The manufactured stretch sensor may be applicable to various sports fields that use lower limb muscles, wearable healthcare products, and medical products for measuring athletic ability.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.54-54
• /
• 2009

AFM anodic oxidation has the capability of patterning complex nano-patterns under relatively high speeds and low voltage. We report the fabrication using a atomic force microscopy (AFM) of silicon nano-ribbon and nano-field effect transistors (FETs). The fabricated nano-patterns have great potential characteristics in various fields due to their interesting electronic, optical and other profiles. The results shows that oxide width and the separation between the oxide patterns can be optimally controlled. The subsequently fabricated silicon nano-ribbon and nano-FET working devices were controled by various tip-sample bias-voltages and scan speed of AFM anodic oxidation. The results may be applied for highly integration circuits and sensitive optical sensor applications.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.189-190
• /
• 2007

• The KIPS Transactions:PartA
• /
• v.17A no.3
• /
• pp.127-136
• /
• 2010

A wireless sensor network(WSN) which roles as a mediator between living environment and computers in ubiquitous computing is very essential research area. Due to the constraint that sensor nodes should work in very resource-restricted circumstances, an operating system that can manage resources effectively is demanded. Also, a sensor network should be able to deal with many events quickly and simultaneously in order to respond to various physical changes in outer environment. The Sensor Network Operating System such as TinyOS, MANTIS and NanoQplus is much designed so that it can satisfy such requirement. But, for programmers who develop application program for sensor networks, they have lack of frameworks which the development is easily possible from restricted development environment. In this paper for this, we implemented a state machine framework apt for responsive systems in NanoQplus which is multi-thread-based sensor network operating system. In addition we propose an event broker module(EBM) for effective event dispatching, a message data structure for message sharing among state machines, and an execution module that handles messages and their queue and performs state transition of the machines. Furthermore, we could do the development more easily an application program with a state-based framework by developing CASE tools.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2009.12a
• /
• pp.213-215
• /
• 2009

• Bulletin of the Korean Chemical Society
• /
• v.27 no.12
• /
• pp.2084-2086
• /
• 2006

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.421-422
• /
• 2010

• Bulletin of the Korean Chemical Society
• /
• v.31 no.12
• /
• pp.3611-3616
• /
• 2010

Five new 4- or 8-substituted-7-hydroxycoumarin derivatives (1-5) were synthesized as fluorescent sensors for metal ions. Fluorescent changes and selectivity for metal ions were compared based on the introduction of different ligands and/or testing with different substitution positions of 7-hydroxycoumarin in aqueous solution. Especially, probes 2, 3 and 5 displayed large fluorescence enhancements with $Zn^{2+}$ and $Cd^{2+}$. Probes 2 and 3 showed moderate selectivity for $Zn^{2+}$ over $Cd^{2+}$. On the other hand, probe 4 showed large fluorescence quenching effects upon the addition of $Ag^+$ and $Hg^{2+}$.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.5 s.57
• /
• pp.93-100
• /
• 2009

This study presents reasonable relationships to estimate the deformation based on beam mechanism analysis and TDR(Time Domain Reflectometry) data. To declar the length points of co-axial cable installed in civil structure, Nano material ($BaTiO_3$ powders and silver mixture) is used on co-axial cables. From the laboratory test, nano material could make the correct information about attached cable points on beam, and TDR sensor system and Fourier series (data filter) found out the deformation of beam. Therefore it is concluded that the correct deformed information of beam were acquired by Nano-TDR and Fourier filter, they are much more effective to apply at health monitoring system in civil structure compared to conventional TDR or Fiber Optic Sensor (FOS) systems.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.9
• /
• pp.566-570
• /
• 2014

Electrode pattern effects on the capacitive humidity sensor were investigated. The fabrication of the capacitive humidity sensor was formed with three steps. The bottom electrode was formed on the silicon substrate with Pt/Ti thin layer by using shadow mask and e-beam evaporator. The photo sensitive polyimide was formed on the bottom electrode by using photolithography process as a humidity sensitive thin film. The upper electrode was formed on the polyimide thin film with Pt/Ti thin layer by using e-beam evaporator and lift-off method. Three electrode patterns, such as circle, square, and triangle pattern, were used and changed the sizes to investigate the effects. The capacitances of the sensors were decreased 622 to 584 pF with the area decreament of patterns 250,000 to $196,250{\mu}m^2$. From these results, a capacitive humidity sensor with photo sensitive polyimide is expected to be applied to a high sensitive humidity sensor.