• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 가을 학술발표논문집 Vol.33 No.2 (D)
• /
• pp.85-89
• /
• 2006

센서네트워크에는 한 가지 종류의 센서만을 사용하는 것이 아니라 여러 가지 종류의 센서를 하나의 네트워크에 연결하여 한 번에 여러 종류의 센서의 질의를 수행할 수 있어야 한다. 이 경우에 다양한 센서가 부착된 네트워크에서 한 가지 종류의 센서에 대한 질의를 수행할 경우 해당되는 센서를 포함하지 않는 센서에 대해서도 질의를 수행해야 한다. 본 논문에서는 여러 종류의 센서가 부착된 센서네트워크에서 라우팅 테이블을 이용하여 질의를 최적화하는 방법을 제안한다. 센서노드의 라우팅 테이블에는 그 센서가 질의명령어를 보내고 받아야 하는 센서노드에 대한정보를 포함한다. 자식노드에 명령어를 보낼 경우 하위노드에서 질의하는 센서의 종류가 없을 경우에도 명령어를 보내야 한다. 이 경우 하위 자식노드에 원하는 센서의 종류에 관한 정보를 포함하면 센서의 종류에 따라서 불필요한 명령어의 수행을 줄일 수 있도록 하였다. 이 방법은 ATmega128 CPU를 장착한 Nano-Q+ 시스템에서 구현되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.280-281
• /
• 2007

본 논문에서는 생체 내에 삽입하거나 연속적으로 혈당을 모니터링하기 위하여 제작된 무효소 혈당세서의 바이오 패키징 및 특성 최적화에 관하여 고찰하였다. 3전극을 갖는 동일한 센서구조에서 sensitivity를 최대화하기 위해 평면형 백금전극을 사용한 센서, 메조포러스 구조가 작동전극에 형성된 센서, 메조포러스 구조가 작동전극과 보조전극에 형성된 무효소 혈당센서를 설계, 제작하고 비교하였다. 각각의 센서는 0.009${\mu}A$ $mM^{-1}cm^{-2}$, 5.46${\mu}A$ $mM^{-1}cm^{-2}$, 7.75${\mu}A$ $mM^{-1}cm^{-2}$의 sensitivity를 가졌다. 또한 생체 이식되었을 때 혈액 속에서 글루코스응답을 얻는 데에 있어 방해종인 Ascrobic Acid와 Acetaminophen의 반응을 최소화하고, 혈액 내의 단백질들이 전극에 엉겨 붙는 것을 막기 위해 생체 적합한 물질인 Nafion 을 패키징 멤브레인으로 적용하여 센서를 제작하였다. 이 센서는 0.36${\mu}A$ $mM^{-1}cm^{-2}$의 sensitivity를 가졌다.

• 마이크로전자및패키징학회지
• /
• 제25권4호
• /
• pp.25-34
• /
• 2018

In this paper, we review the latest technical progress and commercialization of stretchable interconnectors, stretchable strain sensors, and stretchable substrates for stretchable electronics. The development of stretchable electronics can pave a way for new applications such as wearable devices, bio-integrated devices, healthcare and monitoring, and soft robotics. The essential components of stretchable electronic devices are stretchable interconnector and stretchable substrate. Stretchable interconnector should have high stretchability and high electrical conductivity as well as stability under severe mechanical deformation. Therefore several nanocomposite-based materials using CNT, graphene, nanowire, and metal flake have been developed. Geometric engineering such as wavy, serpentine, buckled and mesh structure has been well developed. Stretchable substrate should also pose high stretchability and compatibility with stretchable sensing or interconnecting material. We summarize the recent research results of new materials for stretchable interconnector and substrate as well as strain sensors. The Important challenges in development of the stretchable interconnector and substrate are also briefly discussed.

• Bulletin of the Korean Chemical Society
• /
• 제30권9호
• /
• pp.2093-2097
• /
• 2009

Novel fluorescent anion chemosensors based on anthracene-isothiouronium derivatives were synthesized. Isomerism due to the intramolecular mobility in these isothiouronium salts was detected by $^1H$ NMR spectroscopy. The effect of the substituent, temperature and solvent on the isomerism was also examined. The anthracene-isothiouronium sensor showed significant fluorescent enhancement upon the addition of various anions such as fluoride, acetate, and dihydrogen phosphate, even in the presence of water.

• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.42-50
• /
• 2005

This paper presents an ultra precision machining system using a high sensitive force sensing module to measure machining forces and penetration displacement in a tip-based nanopatterning. The force sensing module utilizes a leaf spring mechanism and a capacitive displacement sensor and it has been designed to provide a measuring range from 80 ${\mu}N$ to 8 N. This force sensing module is mounted on a PZT driven in-feed motion stage with 1 nm resolution. The sample can be moved by X-Y scanning motion stage with 5 nm resolution. In nano indentation experiments and patterning experiments, the machining forces were controlled and monitored by the force sensing module. Then, the patterned samples were measured by AFM. Experimental results demonstrated that the developed system can be used as an effective device in nano indentation and nanopatterning operation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.910-913
• /
• 2002

Recently, the sensor and actuator are developed with EAP(Electro Active Polymer). Common used of they is close at hand, the bio chip and Lab on a chip are researched. For developed bio and micro system, a researcher applies semiconductor fabrication or make it by his hand. But, this method takes long time and a tolerance is large So they are problem of common used. So In this paper we propose the new inject ion molder and micro mold. The micro mold is different from exist ing mold. In this paper, the fabration of micro mold is introduced to inject.

• 센서학회지
• /
• 제17권4호
• /
• pp.256-260
• /
• 2008

This paper describes the mechanical properties of poly(polycrystalline) 3C-SiC thin films with various doping concentration, in which poly 3C-SiC thin fil's mechanical properties according to the n-doping concentration 1($9.2{\times}10^{15}cm^{-3}$), 3($5.2{\times}10^{17}cm^{-3}$), and 5%($6.8{\times}10^{17}cm^{-3}$) respectively were measured by nano indentation. In the case of $9.2{\times}10^{15}cm^{-3}n$-doping concentration, Young's modulus and hardness were obtained as 270 and 30 GPa, respectively. When the surface roughness according to n-doping concentrations was investigated by AFM(atomic force microscope), the roughness of poly 3C-SiC thin films doped by 5% concentration was 15 nm, which is also the best of them.

• 한국분말재료학회지
• /
• 제19권5호
• /
• pp.367-372
• /
• 2012

Single crystalline Cu nanowires with controlled diameters and aspect ratios have been synthesized using electrochemical deposition within confined nanochannels of a porous anodic aluminium oxide(AAO) template. The diameters of nano-sized cylindrical pores in AAO template were adjusted by controlling the anodization conditions. Cu nanowires with diameters of approximately 38, 99, 274 nm were synthesized by the electrodeposition using the AAO templates. The crystal structure, morphology and microstructure of the Cu nanowires were systematically investigated using XRD, FE-SEM, TEM and SAED. Investigation results revealed that the Cu nanowires had the controlled diameter, high aspect ratio and single crystalline nature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2537-2539
• /
• 2005

In many cases the systems are so complex that it is not possible to obtain reasonable models using physical laws. Also a model based on physical laws contains a number of unknown parameters even if the structure is derived from physical laws. These problems can be solved by system identification. In this paper, a nano stage system is selected as an example for system identification. The transfer functions of this system is derived by using state-space model structure based on input/output data through experiment.

• International Journal of Internet, Broadcasting and Communication
• /
• 제10권4호
• /
• pp.65-69
• /
• 2018

In this paper, we propose an interworking architecture for building indoor air quality monitoring server (BEMS) using IIoT (Industrial Internet of Things). The proposed monitoring server adopts IIoT-based standard protocol so that interaction with BEMS installed in existing buildings can be performed easily. It can effectively communicate with indoor air quality measurement sensor installed in the building based on IIoT, Indoor air quality monitoring is possible. We implemented a proposed monitoring server, and confirmed the availability and monitoring of data from sensors in the building.