• 한국결정성장학회지
• /
• 제19권2호
• /
• pp.84-89
• /
• 2009

The turbid/translucent, near colorless(milky) metamorphic sapphire samples from Sri Lanka have been characterized after the heat treatment in $N_2$ at $1650^{\circ}C$. As-received sapphire specimens became bluish-colored and exhibited more clarity after the heat treatment. It was found that the color change at inclusions zoning region is attributed by the dissolution. As received samples contain the micro/nano inclusions such as rutile($TiO_2$), ilmenite($FeTiO_3$), spinel($MgAl_{2}O_{4}$)/ulvospinel($Fe_{2}TiO_{4}$) and apatite($Ca_5(PO_4)_3$), which were dissolved by the heat treatment and form the blue color through $Fe^{2+}/Ti^{4+}$ charge transferring. The microstructures become different because as the dissolution of apatite($Ca_5(PO_4)_3(OH,F,Cl)$) in alumino silicates($Al_{2}SiO_{5}$) occurred, resulting in morphological change with the appearance of(Ca, Mg, Al) silicate on the surface. Both as-received and heat treated samples showed the rhombohedral crystal structure of $Al_{2}O_{3}$.

• 마이크로전자및패키징학회지
• /
• 제17권3호
• /
• pp.51-57
• /
• 2010

p형 $(Bi,Sb)_2Te_3$ 분말을 용해/분쇄법으로 제조하여 가압소결 후 가압소결조건에 따른 열전특성을 분석하였으며, 나노개재물로서 $ZrO_2$의 첨가에 따른 열전특성의 변화거동을 분석하였다. 가압소결온도를 $350^{\circ}C$에서 $550^{\circ}C$로 증가시킴에 따라 가압소결체의 Seebeck 계수가 275 ${\mu}V$/K에서 230 ${\mu}V$/K로 감소하였으며, 전기비저항이 6.68 $m{\Omega}m$-cm에서 1.86 $m{\Omega}$-cm로 감소하였다. 1 vol% 이상의 $ZrO_2$ 함량 증가에 따라 power factor가 계속 감소하는 거동으로부터 $(Bi,Sb)_2Te_3$ 가압소결체의 최대 power factor를 얻을 수 있는 $ZrO_2$ 나노개재물의 최적 함량은 1 vol% 미만으로 판단되었다.

• Composites Research
• /
• 제25권6호
• /
• pp.178-185
• /
• 2012

본 연구에서는 기능성 나노복합재를 제작하는 방법이 제시되었다. 미소 입자들을 포함하고 있는 점성을 가진 유체에 전기장을 가하여 유체속에 포함된 입자들을 전기장의 방향에 따라 규칙적으로 배열을 하였다. FAiMTa 기술이라고 불리는 이 방법은 마이크로 혹은 나노 사이즈의 입자들을 체인의 형태로 배열하여 직교이방성 폴리머 나노복합재의 제작을 가능하게 하였다. 알루미나($Al_2O_3$), 탄소나노튜브(CNT), 탄소(Graphite), 텅스텐(W) 등의 마이크로 혹은 나노 사이즈 입자 분말을 사용하여 FAiMTa기술의 유효성을 확인하는 시험을 수행하였다. 이러한 입자들을 전기장을 사용하여 일정한 방향으로 배열하여 직교이방성 폴리머 복합재를 만들었고, 시험시편의 물리적 특성 즉 기계적 열적 특성을 측정하여 방향성을 확인하였다. 이렇게 제작된 첨단 나노복합재는 각종 산업분야에서 큰 효과가 기대된다.

• Journal of Magnetics
• /
• 제16권1호
• /
• pp.15-18
• /
• 2011

We have studied the $TiO_2$ doping effects on the flux pinning behavior of an $MgB_2$ superconductor synthesized by the in-situ solid-state reaction. From the field-cooled and zero-field-cooled temperature dependences of magnetization, the reversible-irreversible transition of $TiO_2$-doped $MgB_2$ was determined in the H-T diagram (the temperature dependence of upper critical magnetic field and irreversibility line). For comparison, the similar measurements are also obtained from SiC-doped $MgB_2$. The critical current density was estimated from the width of hysteresis loops in the framework of Bean's model at different temperatures. The obtained results manifest that nano-scale $TiO_2$ inclusions served as effective pinning centers and lead to the enhanced upper critical field and critical current density. It was concluded that the grain boundary pinning mechanism was realized in a $TiO_2$-doped $MgB_2$ superconductor.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.172-172
• /
• 2010

$MgB_2$ doped with $TiO_2$ was prepared by the in-situ solid state reaction to study the effects of $TiO_2$ dopant on the flux pinning behavior of $MgB_2$ superconductor. From the field-cooled and the zero-field-cooled temperature dependences of magnetization, the realms of vortex-glass and vortex-liquid states of $TiO_2$-doped $MgB_2$ were determined in the H-T diagram (the temperature dependence of upper critical magnetic field and irreversibility line). The critical current density was estimated from the width of hysteresis loops in the framework of Beam's model at different temperatures. The results indicate that nano-scale $TiO_2$ inclusions play a role of the effective pinning centers and lead to the enhanced upper critical field and critical current density. It is suggested that the grain-boundary pinning mechanism is realized in $TiO_2$-doped $MgB_2$ superconductor.

• Composites Research
• /
• 제26권6호
• /
• pp.355-362
• /
• 2013

복합재료 중 가장 많이 사용되는 탄소계 나노복합재의 성능 향상에 대한 연구가 수행되었다. 나노 사이즈의 탄소나노튜브(CNT)와 마이크로 사이즈의 그레파이트(Graphite) 입자를 일정한 형태로 배열하여 나노복합재를 제작하였다. 입자를 배열하기 위하여 전기장을 활용하였다. 일정한 방향 혹은 형태로 배열된 입자는 에폭시 기지 속에서 섬유강화 복합재 처럼 일정한 방향으로 강성의 향상을 나타낸다. 복합재의 구조적 강성이나 물리적 특성은 강화 입자의 배열상태에 따라 매우 달라지게 된다. 본 연구에서는 특히 탄소나노튜브와 그레파이트 강화입자의 전기장 배열에 의해서 만들어진 나노복합재의 강성 및 방사능 차폐특성을 규명하였다. 전기장에 의한 입자의 배열로 만들어진 탄소계 복합재는 구조적 성능뿐만 아니라 물리적인 방사능 차폐에서도 훌륭한 특성을 나타내었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권4호
• /
• pp.46-49
• /
• 2018

To improve in-field critical current densities ($J_c$) of $GdBa_2Cu_3O_{7-{\delta}}$ (GdBCO) coated conductors(CCs) fabricated by the reactive co-evaporation by deposition and reaction (RCE-DR) process, employing the nominal composition of Gd:Ba:Cu=1:1:2.5, we tried to refine the $Gd_2O_3$ particles trapped in the GdBCO superconducting matrix. For this purpose, we carefully selected the processing conditions on the stability phase diagram of GdBCO for this composition. By lowering the growth temperature of $Gd_2O_3$ in the liquid, we could refine the average particle size of $Gd_2O_3$ particles trapped in the GdBCO matrix and also achieve the zero-resistive transition temperatures ($T_{c,zero}$) of 92.3~94.2 K. Unfortunately, however, it was unsuccessful to achieve enhanced in-field $J_c$ values from these samples because of an air-contamination of the amorphous precursor film before its conversion into crystalline GdBCO film, suggesting that any exposure of the amorphous precursor film to air is fatal in obtaining high performance GdBCO CCs via the RCE-DR process.

• Nuclear Engineering and Technology
• /
• 제51권5호
• /
• pp.1365-1372
• /
• 2019

The effects of Y and Ti on the microstructure stability and tensile properties of the reduced activation ferritic/martensitic steel have been investigated. The addition of Y and Ti affected the prior austenite grain size due to the pinning of the inclusions. Ti addition of 0.008 wt% to the steel was intended to promote the precipitation of nano-sized carbides with a high resistance to coarsening. 8Ti14Y exhibited a higher yield strength and a lower DBTT than the other alloys due to the fine grain size and additional precipitation hardening by (Ti, Ta)-rich MX. After thermal exposure at $550^{\circ}C$ for 1500 h, yield strength was dropped significantly in exposed 0Ti13Y. On the contrary, a lower reduction of YS was observed in 8Ti14Y. The $M_{23}C_6$ in 0Ti13Y and 8Ti14Y and MX in 25Ti14Y and 39Ti15Y coarsened seriously during ageing, which could be responsible for the reduction of the tensile properties of alloys.

• Transactions on Electrical and Electronic Materials
• /
• 제14권3호
• /
• pp.121-124
• /
• 2013

The incorporation of 90 nm alumina particles into an epoxy matrix to form a composite microstructure is described in present study. It is shown that the use of ultrafine particles results in a substantial change in the behavior of the composite, which can be traced to the mitigation of internal charges when a comparison is made with conventional $Al_2O_3$ fillers. A variety of diagnostic techniques have been used to augment pulsed electro-acoustic space charge measurement to provide a basis for understanding the underlying physics of the phenomenon. It would appear that, when the size of the inclusions becomes small enough, they act cooperatively with the host structure and cease to exhibit interfacial properties. It is postulated that the $Al_2O_3$ particles are surrounded by high charge concentrations. Since $Al_2O_3$ particles have very high specific areas, these regions allow limited charge percolation through $Al_2O_3$ filled dielectrics. The practical consequences of this have also been explored in terms of the electric strength exhibited. It would appear that there was a window in which real advantages accumulated from the nano-formulated material. An optimum filler loading of about 0.5 wt.% was indicated.

• 접착 및 계면
• /
• 제20권3호
• /
• pp.102-109
• /
• 2019

PET기재 필름 위에 코팅된 다층박막 필름의 층별성분을 ATR FT-IR과 Pyro GC/MS(Gas Chromatography/Mass Spectroscopy)를 이용하여 분석을 시도하였다. 필름의 단면은 액체질소에 담근 후 파괴시켜 얻었으며 광학 현미경을 이용하여 관찰하였다. 이 결과 코팅층의 총 두께는 $70{\mu}m$였으며 3개의 층으로 관찰되었다. 각 층의 두께는 너무 얇기 때문에 표면층을 제외하고는 직접분석이 어려워 적절한 용매로서 각 층을 드러나게 한 후 ATR FT-IR과 pyro-GC/MS를 이용하여 분석을 시도하였다. 이 결과 3개 층은 공통적으로 우레탄-아크릴레이트 공중합체로 밝혀졌다. 또한 무기 혹은 금속성분의 첨가여부는 XPS와 SEM-EDAX를 이용하여 분석하였으며 도장층 (1)에는 나노크기의 실리카 입자가 도장층 (2)에서는 알루미늄 박편이 존재함을 알게 되었다.