• Elastomers and Composites
• /
• v.55 no.1
• /
• pp.20-25
• /
• 2020

The effect of the isocyanate index (NCO index) on the particle size and particle size distribution of a waterborne polyurethane dispersion (WPUD) with polycarbonate-diol was determined. The WPUDs were prepared using a conventional acetone process with polycarbonate-polyol (M_n = 2028), 4,4'-methylenebis(cyclohexyl isocyanate) (H₁₂MDI), 2,2-bis(hydroxymethyl) propionic acid (DMPA), and dibutyltin dilaurate catalyst. At NCO index values below 1.5, the number average particle diameter of the WPUDs significantly increased with the NCO index, whereas the particle diameter slightly varied at higher NCO indexes. The dependency of the WPUD viscosity on the NCO index exhibited similar behavior to that of the particle size. The relative values of the full width at half maximum of the WPUD particle distribution curves at various NCO indexes were not influenced by the NCO index.

• Journal of the military operations research society of Korea
• /
• v.36 no.3
• /
• pp.95-111
• /
• 2010

The NCO effectiveness analysis related elements and their relationship are more complicated than the PCW. However, Effectiveness analysis models provide single effectiveness element centric effective analysis method so far. Therefore, A model to provide unified view and common language about NCO effectiveness is required. EA use reference model as a common language to control complexity and change. The objective of this study is presenting a methodology to develop NCO effectiveness analysis model based on reference model and implementation model concept. To do this, First, the concept of EA based reference and implementation model is studied, Second, we study related effectiveness analysis method and model component and their relationship identification methodology, third, we propose methodology to develop NCO effectiveness analysis model. Finally, we prove the effectiveness of the methodology using case study.

• Elastomers and Composites
• /
• v.36 no.4
• /
• pp.268-277
• /
• 2001

The MDI(4,4'-diphenyl methane diisocyanate) was mixed with PPG, PEG and trimethylolpropane(TMP) respectively to prepare polyurethane resin. The various physical properties were measured for the mixtures. The gel-time was shortened by adding of PEG and TMP The molecular weight made a greater influence on the gel-time than the number of functional groups. The NCO-OH reaction was more active and faster than the NCO-NCO reaction. The hardness was influenced by crosslinking-density and molecular structure. The NCO-OH reactions yielded the flexible films and the NCO-NCO reactions yielded the brittle films. The increase of crystallinity and shrinkage induced the low adhesion ratio but the adding of TMP induced the high adhesion ratio. The flame-retardancy was influenced by quantity and kinds of flame-retardant. IXOL B-251 was the most excellent among the flame-retardants employed in this study. TCCP was partially separated because of the lack of solubility.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11B
• /
• pp.1565-1573
• /
• 2001

In order to resolve problems according to the phase error in QPSK demodulator in the digital satellite broadcasting, the demodulator requires carrier recovery loop which searches for the frequency and phase of the carrier. In this paper the drawback of NCO of the conventional carrier recovery loop is to wastes a amount of power for the structure of Look-up table , we designed the structure of combinational logic without the Look-up table. In the comparison with dynamic power of the proposed NCO, the power of NCO with the Look-up table is 175[${\mu}$W], NCO with the proposed structure is 24.65[${\mu}$W]. As the result, it is recognized that loss power is reduced about one eighth. In the simulation of carrier recovery loop designed QPSK demodulator, it is known that the carrier phase is compensated.

• Journal of the Korean Institute of Gas
• /
• v.16 no.6
• /
• pp.115-122
• /
• 2012

Polyurethane foams were synthesized with different contents and kinds of catalysts to know change of properties under various NCO index. UTM(universal testing machine), DSC(differential scanning calorimetry), SEM(scanning electron microscope) and FT-IR(Fourier transform spectroscopy) were used for studying the PUF's physical properties change. Compressive strength of PUF increased with increasing contents of catalyst. Glass transition temperature(Tg) and compressive strength of PUF using PC-8 and 33LV catalyst, increased with increasing NCO index at the aging. According to the results of Infrared spectral analysis, reduction of NCO peak was found in gelling catalyst, because unreacted NCO reacted with polyurethane. Although Tg and compressive strength of PUF using TMR-2, unchanged with increasing NCO index at the aging, because trimerization of isocyanate.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.907-910
• /
• 2000

QPSK 복조기는 위상 오차에 따른 문제점을 극복하기 위해 수신단에서는 반송파의 주파수와 위상을 tracking 하는 Carrier recovery loop부분이 필요하다〔1〕. Carrier recovery loop는 multiplier, arm filter, matched filter, decimator, loop filter, NCO로 구성이 된다〔2〕.기존 Carrier recovery loop의 NCO는 sine과 cosine의 lookup table을 갖는 구조로 되어있어, 전력소모가 크다는 문제점을 가지고 있다. 따라서 본 논문에서는 lookup table을 사용하지 않는 저 전력 구조의 QPSK복조기의 Carrier recovery loop의 NCO를 설계했다.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.57-63
• /
• 2017

In this study, we identified how the water content change in various NCO index affects the static comfort of polyurethane seat foam pad for automobiles. In order to identify factors that affect the static comfort, a static load test was performed using UTM to plot a hysteresis curve. The hardness of the foam when it was modified by 25, 65%, hysteresis loop area, hysteresis loss (%), and Sag factor were also obtained. By measuring the swelling ratio, it was confirmed that, as the water content increased in a fixed NCO index, the hardness and crosslinking density increased while the restoring force decreased due to the increase of urea bond. Also the Sag factor decreased due to the increase of surface hardness. As the NCO index increased in a fixed water content, the urethane and urea bond reacted more with isocyanate, leading to an increase in hardness and decrease in restoring force.

• Convergence Security Journal
• /
• v.13 no.2
• /
• pp.111-120
• /
• 2013

Army NCO roles and responsibilities in conjunction with the Defense Reform 2020 plan to perform a pivotal role in the bag the past tradition inherited bag and development, transition the mission commander helpers battle conductor, mainly functional experts, management experts from the bag to show PowerIt has a pivotal role as a transition. It embodies the director and the military organization of work within the scope of the statutes and rules, such as planning and implementation as the core of the Power which is most frontline officers, the NCO instructions and control through education and functional personnel to maintain the best Power will. Propose the measures that can be overcome by considering the importance of key personnel, operating personnel NCO in the military organization and analysis of the issues, the problem of the NCO system. The social awareness to be able to build a system to obtain a stable workforce through effective operations for changes in the revival, especially in the Department College of NCO activated mutual development challenges were present.

• Advances in materials Research
• /
• v.13 no.2
• /
• pp.129-140
• /
• 2024

This study evaluates the ratio of Toluene di-isocyanate (TDI) functional group isocyanate (NCO) to the binder functional hydroxyl group (OH) in HTPB/AP/Al-based propellants on their mechanical properties, flow rate, and viscosity to determine the limitations of NCO/OH in the composition of solid propellants. The propellants consisted of hydroxyl-terminated polybutadiene (HTPB) polyurethane (PU), aluminum (Al) and tri-modal ammonium perchlorate (AP). The tri-modal AP consisted of 30% of coarse AP, 30% of medium AP, and 8% of fine AP. The ratio of NCO/OH varies from 0.73 to 0.85, with two binder percentages of 10.5% and 12%. An increase in NCO/OH ratio with 10.5% binder provided 20%, 95%, and 8 to 9% increments in UTS, modulus, and hardness, respectively. However, the propellant elongation, density, and flow rate decreased by 170%, 0.2%, and 11-12%, respectively. Viscosity increased 20% based on initial hour reading. The 12% binder provides 27%, 47%, and 5~6% an increment of UTS, modulus and hardness respectively. However, the propellant elongation, density, and flow rate decreased by 47%, 0.17% and 27%, respectively. The viscosity increased 30% based on initial hour reading. This study suggests the NCO/OH value of 0.77 and 10.5~11% binder content in propellant based on the mechanical properties, flow rate, and viscosity for better processing and pot life.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.6
• /
• pp.744-750
• /
• 2014

In this paper, I have measured NCO(Network Centric Operation) Effectiveness of Anti-piracy Operation at the Chunghae Unit. For quantitative analysis, Network Centric Operations Conceptual Framework(U.S Office of Force Transformation) is applied. In accordance with the framework, the Chunghae unit anti-piracy operation scenario is analysed. The scenario is devided with two case(only voice communication and networking). The element of analysis be composed of the organic information, networking, share-ability, and individual information. As a result of analysis, the individual information of first case(only voice) gets 0.59 points. The other side, second case (networking) gets 1 points. This means that NCO has effect on the Chunghae Unit's mission. In addition, I stated the tactics advantage of NCO related a fighting power.