Browse > Article
http://dx.doi.org/10.7473/EC.2020.55.1.20

Effect of NCO Index on the Particle Size of Polycarbonate Diol-based Polyurethane Dispersion  

Kim, Dong-Eun (Department of Chemical Engineering, Dong-A University)
Kang, Seung-Oh (Department of Chemical Engineering, Dong-A University)
Lee, Sang-Ho (Department of Chemical Engineering, Dong-A University)
Publication Information
Elastomers and Composites / v.55, no.1, 2020 , pp. 20-25 More about this Journal
Abstract
The effect of the isocyanate index (NCO index) on the particle size and particle size distribution of a waterborne polyurethane dispersion (WPUD) with polycarbonate-diol was determined. The WPUDs were prepared using a conventional acetone process with polycarbonate-polyol (Mn = 2028), 4,4'-methylenebis(cyclohexyl isocyanate) (H12MDI), 2,2-bis(hydroxymethyl) propionic acid (DMPA), and dibutyltin dilaurate catalyst. At NCO index values below 1.5, the number average particle diameter of the WPUDs significantly increased with the NCO index, whereas the particle diameter slightly varied at higher NCO indexes. The dependency of the WPUD viscosity on the NCO index exhibited similar behavior to that of the particle size. The relative values of the full width at half maximum of the WPUD particle distribution curves at various NCO indexes were not influenced by the NCO index.
Keywords
polycarbonate-polyol; polyurethane dispersion; NCO index; particle size; viscosity;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 H. Sardon, L. Irusta, M. J. Fernandez-Berridi, J. Luna, M. Lansalot, and E. Bourgeat-Lami, "Waterborne polyurethane dispersions obtained by the acetone process: A study of colloidal features", J. Appl. Polym. Sci., 120, 2054 (2011).   DOI
2 M. Szycher, "Szycher's Handbook of Polyurethanes", CRC press (2012).
3 F. Zhang, X. Wei, and Z. Xiao, "Study on high-solid content Si/PU polyurethane dispersion with PES/PPG composite soft segment", J. Appl. Polym. Sci., 127, 1730 (2013).   DOI
4 H. Blum, W. Hovestadt, L. Kahl, and D. A. Wicks, U.S. patent 6084051A (2000).
5 C. Chinwanitcharoen, S. Kanoh, T. Yamada, S. Hayashi, and S. Sugano, "Preparation of aqueous dispersible polyurethane: effect of acetone on the particle size and storage stability of polyurethane emulsion", J. Appl. Polym. Sci., 91, 3455 (2004).   DOI
6 T. Michel, R. Patrice, and D. G. Philippe, "Colloidal stability of surfactant-free radiation curable polyurethane dispersions", Prog. Org. Coat., 55, 128 (2006).   DOI
7 C. Fang, X. Zhou, Q. Yu, S. Liu, D. Guo, R. Yu, and J. Hu, "Synthesis and characterization of low crystalline waterborne polyurethane for potential application in water-based ink binder", Prog. Org. Coat., 77, 61 (2014).   DOI
8 M. Torres and W. Canet, "Rheological properties of frozen vegetable purees. Effect of freeze-thaw cycles and thawing conditions", Eur. Food Res. Technol., 213, 30 (2001).   DOI
9 Y. Berezkin and M. Urick, "Modern polyurethanes: Overview of structure property relationship", ACS Symp. Ser., 1148, 65 (2013).
10 M. Song, J. Kim, and K. Suh, "Preparation of UV-curable emulsions using PEG-modified urethane acrylates: The effect of nonionic and anionic groups", J. Appl. Polym. Sci., 62, 1775 (1996).   DOI
11 N. D. Hann, "Effects of lithium bromide on the gel-permeation chromatography of polyester-based polyurethanes in dimethylformamide", J. Polym. Sci.: Polym. Chem. Ed., 15, 1331 (1977).   DOI
12 U. Khan, P. May, A. O'Neill, and J. N. Coleman, "Development of stiff, strong, yet tough composites by the addition of solvent exfoliated graphene to polyurethane", Carbon, 48, 4035 (2010).   DOI
13 M. Kiremitci, M. Pulat, C. Senvar, AI. Serbetci, and E. Piskin, "Structural and cellular characterization of solvent-casted polyurethane membranes", Clin. Mater., 6, 227 (1990).   DOI
14 L. Bao, Y. Lan, and S. Zhang, "Synthesis and properties of waterborne polyurethane dispersions with ions in the soft segments", J. Polym. Res., 13, 507 (2006).   DOI
15 J. Y. Jang, Y. K. Jhon, I. W. Cheong, and J. H. Kim, "Effect of process variables on molecular weight and mechanical properties of water-based polyurethane dispersion", Colloids. Surf. A Physicochem. Eng. Asp., 196, 135 (2002).   DOI
16 Y. Jhon, I. Cheong, and J. Kim, "Chain extension study of aqueous polyurethane dispersions", Colloids. Surf. A Physicochem. Eng. Asp., 179, 71 (2001).   DOI
17 H.-K. Shin and S.-H. Lee, "Effect of Catalyst Type and NCO Index on the Synthesis and Thermal Properties of Poly(urethane-isocyanurate) Foams", Elast. Compos., 53, 86 (2018).   DOI
18 C. Fang, X. Zhou, Q. Yu, S. Liu, D. Guo, R. Yu, and J. Hu, "Synthesis and characterization of low crystalline waterborne polyurethane for potential application in water-based ink binder", Prog. Org. Coat., 77, 61 (2014).   DOI
19 K. Roschmann, J. Leuninger, R. Dersch, C. Zhao, L. Zhuo, and T. A. Cunningham, U.S. patent 20060052502A1 (2009).
20 김동은, "수분산 난연 폴리우레탄 복합체 합성과 열적 특성", 석사학위논문, 동아대학교 일반대학원 (2019).
21 D. Lee, H. Tsai, H. Wang, and R. Tsai, "Aqueous polyurethane dispersions derived from polycarbonatediols", J. Appl. Polym. Sci., 94, 1723 (2004).   DOI
22 A. K. Nanda, D. A. Wicks, S. A. Madbouly, and J. U. Otaigbe, "Effect of ionic content, solid content, degree of neutralization, and chain extension on aqueous polyurethane dispersions prepared by prepolymer method", J. Appl. Polym. Sci., 98, 2514 (2005).   DOI
23 C. Y. Bai, X. Y. Zhang, J. B. Dai, and C. Y. Zhang, "Water resistance of the membranes for UV curable waterborne polyurethane dispersions", Prog. Org. Coat., 59, 331 (2007).   DOI
24 M. C. Delpech and F. M. Coutinho, "Waterborne anionic polyurethanes and poly(urethane-urea)s: influence of the chain extender on mechanical and adhesive properties", Polym. Test., 19, 939 (2000).   DOI
25 V. Garcia-Pacios, V. Costa, M. Colera, and J. M. Martin-Martinez, "Waterborne polyurethane dispersions obtained with polycarbonate of hexanediol intended for use as coatings", Prog. Org. Coat., 71, 136 (2011).   DOI
26 B. Kim, "Aqueous polyurethane dispersions", Colloid Polym. Sci., 274, 599 (1996).   DOI
27 M. Lu, J. Lee, M. Shim, and S. Kim, "Synthesis and properties of anionic aqueous polyurethane dispersions", J. Appl. Polym. Sci., 86, 3461 (2002).   DOI
28 F. Najafi, F. Manouchehri, and M. Shaabanzadeh, "Synthesis and characterization of anionic polyester-polyurethane dispersion as environmentally-friendly water based resins", Journal of Chemical Health Risks, 1, 23 (2011).
29 A. K. Nanda and D. A. Wicks, "The influence of the ionic concentration, concentration of the polymer, degree of neutralization and chain extension on aqueous polyurethane dispersions prepared by the acetone process", Polymer, 47, 1805 (2006).   DOI