Dental implant systems have shown many post-surgical problems and One of the most frequent problem is screw loosening. To reduce screw loosening, a number of methods have been tried and recently fundamental modification of fixture-abutment connection structure was developed and used the most frequently. Former implant system structure, such as Br${\aa}$nemark, had external hex with the height of 0.7 mm and later, fixture with external hex of 1.0 mm height and internal hex structure were developed. In addition, the method of morse taper application was introduced to reduce screw loosening. In this study, the level of screw loosening of each implant systems was compared based on the vibration loosening measurement of abutment screw of each implant systems. Analysis of measured value was performed using 3 kinds of methods, (i) Percentage of average of initial 3 times loosening-torque value(initial loosening value) to tightening-torque of 30 Ncm, (ii) Percentage of loosening-torque value after 200 N strength loaded(experimental value) to initial loosening value and (iii) Percentage of experimental value to 30 Ncm of tightening-torque. Each result of analyses shows the value of initial loosening, loosening by repetitive load and final loosening level. The results of this study were as follows. (1) Percentage of initial loosening value to tightening-torque was increased in order of 0.7 mm external hex, 1.0 mm external hex, internal hex and internal taper and all values between each groups showed statistical significance (p<0.05). (2) Percentage of experimental value to initial loosening value was increased in order of internal hex, 0.7 mm external hex, 1.0 mm external hex and internal taper. Value of internal taper showed significant difference with that of 0.7 mm external hex and internal hex (p<0.05). (3) Percentage of experimental value to tightening torque was increased in order of 0.7 mm external hex, 1.0 mm external hex, internal hex and internal taper. Values of all groups showed statistical significance (p<0.05) except between the groups of 1.0 mm external hex and internal hex. Based on those results, there was no significant difference of loosening-torque by repetitive loading except internal taper. It is supposed that implant system with high resistant capability against initial loosening could be recommended for clinical use. In addition, in case of single implant restoration, 1.0 mm external hex or internal hex could be recommended rather than 0.7 mm external hex, and the use of internal taper would be the most useful way to reduce screw loosening.
본 연구에서는 동진강 수계에서 외래 교란어종(큰입배스와 블루길)에 대한 물리적 서식지 및 화학적 수질특성의 영향을 분석하였다. 또한 큰입배스(Micropterus salmoide)와 불루길(Lepomis macrochirus) 각각 어종에 대한 우점 지역(출현 지역)과 비출현 지역을 구분하였고, 수 화학(Water chemistry) 및 어류서식지 특성(하상구조 등)에 대한 상관도 분석을 실시하였다. 두 교란어종의 상대 풍부도는 BOD, PO4-P 및 pH의 수질이 악화됨에 따라 크게 감소하였으나, NO3-N 및 전기전도도에 따른 풍부도 변화는 보이지 않았다. 블루길은 동진강 수계의 우점 지역(출현지역)과 비출현 지역 두 지역 사이에 서식지 구조적 측면에서 유의한 차이를 보이지 않은 반면, 큰입배스는 두 지역 간의 비교군에서 뚜렷한 차이를 보였고, 특히, 실트, 자갈, 암반과 같은 하상구조에서 뚜렷한 차이를 보였다. 동진강에서 우점종은 피라미(14.6%), 불루길(14.0%) 및 큰입배스(9.8%)로서 나타났다. 즉, 외래 생태교란종이 전체 개체수의 24%를 차지하여, 동진강 수계는 외래종의 분포는 유기물 오염 및 영양염(P) 오염에 의해 크게 영향을 받는 것으로 나타났다.
본 연구에서는 최근 환경재료로서 관심이 모아지고 있는 다공성 콘크리트를 하천구조물(보 및 하상재료)에 적용함으로써 수질을 개선하고자 수행하였다. 먼저, 물리ㆍ화학적 특징을 평가해 본 결과, 공극률 10% 및 30%의 다공성 콘크리트의 압축강도는 일반 콘크리트의 최저 압축강도(180 kgf/$cm^2$)를 상회하여 하천구조물에 적용 가능하였고, 알칼리 용출에 의한 부착 미생물에의 영향도 거의 없을 것으로 판단되었다. 또한, 일반 콘크리트와 다공성 콘크리트로 하천구조물을 제작하여 부착물의 성상을 비교ㆍ검토한 결과, 같은 유속조건에서 부착물의 DW량은 일반 콘크리트에 비해 다공성 콘크리트가 1.6배 높은 것으로 나타났으며, 반면에 유속을 10배 달리한 실험의 결과에서는 거의 같은 부착물의 DW량을 보여 부착매질에 의한 영향이 유속에 의한 영향보다도 더 크게 작용한 것을 알 수 있었다. 부착물의 성상에서도 건조물중 AFDM의 비가 다공성 콘크리트에서 더 큰 것으로 나타났으며, 특히 N, P의 비가 높은 것은 부착 생물에 의한 흡수 및 흡착, 물질대사에 의해 유기물 제거가 더 컸기 때문으로 사료된다. 수질개선 효과에 있어서 전 구간을 종합한 결과, 다공성 콘크리트를 적용한 하천구조물에서의 SS, BOD, COD, T-N, T-P의 제거효율은 일반 콘크리트 보다 각각 34.6%, 36.9%, 33.9%, 18.3%, 21.6% 씩 증가하여 하천 수질개선에 크게 기여한 것으로 평가되었다.
유기성폐슬러지를 염화아연과 황화칼륨으로 약품활성화하여 제조한 활성탄의 세공발달과 흡착특성을 연구하였다. 유기성폐슬러지로 제조한 탄소의 세공발달은 77K에서 질소흡착법을 이용하여 특성화하였다. 염화아연으로 약품활성화하여 제조한 $ZnCl_2$-활성탄은 활성화공정에 의해 미세공이 형성되었음을 지적해주는 BDDT 분류의 type I의 흡착특성을 보여주었다. 상용 분말활성탄과 $K_2S$-활성탄은 BDDT 분류의 type IV와 유사한 이력현상을 나타냈는데, 이것은 이들 활성탄에 중세공이 형성되었음을 말해준다. 이것은 $K_2S$-활성탄은 주로 중세공과 미세공으로 이루어졌으며, 거대세공의 발달은 미비하다는 것을 의미한다. 유기성폐슬러지로 제조한 $K_2S$-활성탄의 중금속 흡착능은 상용입상활성탄보다 우수한 것으로 나타났다. $K_2S$-활성탄에 대한 중금속의 흡착은 단분자층 흡착을 나타내는 Langmuir와 Freundlich 등온식에 잘 부합되었다. $PO_4$-P에 대한 흡착능은 $K_2S$-활성탄이 $ZnCl_2$-활성탄보다 우수한 것으로 나타난 반면, $NO_3$-N의 흡착은 $ZnCl_2$-활성탄이 우수한 것으로 나타났다. 본 연구결과, 활성화제로 염화아연과 황화칼륨을 사용하여 유기성폐슬러지를 약품처리할 경우, 탄화와 활성화공정을 거치는 2단계 공정을 통하여 상용입상활성탄보다 흡착능이 뛰어난 활성탄을 제조할 수 있었다.
막스 베버는 중국의 종족(宗族) 조직을 자급자족의 자기완결적인 것으로 이해하였다. 그의 관점은 유사한 종법적 친족 조직인 조선시대 문중에도 적용될 가능성이 있다. 그러나 구성원들의 삶에서 종족 조직 외부를 상정(想定)하지 않는 그의 관점은 종족에 대한 이해를 지나치게 단순화했다는 혐의를 벗기 어렵다. 이 글은 이러한 문제의식에서 출발하여 17세기 조선에 출현한 파평윤씨(坡坪尹氏) 노종파(魯宗派)의 종족 운동을 검토하고, 이를 바탕으로 조선시대 문중의 공동체적 성격에 대해 논한다. 이 글의 주요 논점은 다음과 같다. 첫째, 노종파는 봉사(奉祀)와 종법적 규범, 자제교육, 물적 토대로서의 족산(族産)을 포함하는 체계적인 미래 기획을 수립하였다. 이 기획은 송대의 선례들을 전범으로 표방하였지만 실제로 양자 사이에는 적지 않은 차이가 있었다. 그들은 종족 운동을 인도(人道)와 인륜(人倫)의 실천(實踐)으로 간주하고 매진함으로써 그 간격을 극복하고 종족의 결집을 유도해 낼 수 있었다. 둘째, 노종파의 종족 기획에서 가장 특징적인 족산 부문(의전(義田) 의곡(義穀))은 제전(祭田)의 기능 이외에 자제교육 지원에 중점을 둔 반면, 기한자(飢寒者) 구제 등 구성원의 생활 지원 기능에서는 취약하였다. 노종파 전체의 의전과 의곡은 결국 40년 만에 폐지되고 소종 단위의 의창(義倉)이 대안으로 모색되었다. 이는 종족의 영속이라는 그들의 기대와 문중의 낮은 물적 토대 수준 사이의 거리를 함축하는 것이었다. 셋째, 문중은 다양한 지역공동체와의 병존 경쟁을 통해 수립되었지만, 가족의 동거공재(同居共財) 속성을 구현하는 데는 의지도 여건도 충분하지 않았고, 결국 구성원의 삶의 재생산에 전반적으로 관여하는 생활공동체로서는 한계를 노정하고 있었다. 문중은 자급자족의 자기완결적인 조직이 아니라, 향촌 또는 국가와 긴밀히 교통하면서 존재할 수밖에 없는 불완전한 조직이었다.
본 연구의 대상지인 굴포천은 산업화와 도시화로 인한 생활하수 및 공장폐수의 유입, 느린 유속과 하천 복개 등과 같은 유입오염원과 하천 구조적 문제로 인하여 수질이 악화되어 왔다. 특히 하천변의 소규모 영세 공장, 중 상류에 형성된 대규모 공업단지, 지역개발에 따른 인구증가로 인한 생활하수 등은 굴포천의 주오염원이다. 따라서 본 연구에서는 굴포천에 영향을 주는 다양한 수질 및 퇴적물의 오염원에 대하여 조사하고, 수체내에서의 오염현황을 모니터링하며, 퇴적물의 용출량을 평가하고 하천의 수질 및 퇴적물의 문제점 파악을 통한 합리적인 개선방향을 제시하고자 한다. 본 연구에서 오염부하량 조사결과, 굴포천 상류에서 하류로 향할수록 유량은 평균 72.8배 증가하였으며, 오염부하량은 평균 SS 111배, BOD 150배, COD 145배, T-N 222배, T-P 312배의 오염부하가 증가함을 알 수 있었다. 퇴적물의 오염 농도 범위는 강열감량의 경우 1.29~12.43%, COD는 4,015~37,547 kg/day의 범위로 나타냈다. 영양물질인 T-N, T-P는 각각 94.8~352.5 kg/day, 81.8~372.3 kg/day의 범위를 나타냈다. 퇴적물의 용출속도의 경우, T-N은 -14.46~$156.61mg/m^2/day$의 용출속도를 보였으며, T-P의 경우 -11.53~$26.10mg/m^2/day$의 용출속도를 보임으로서 퇴적물 용출에 의한 내부오염의 가능성이 있음이 나타났다. 본 연구의 결과를 통해 굴포천 유역을 효율적으로 관리하는데 기초자료로 활용할 수 있을 것으로 사료된다.
본 논문에서는 CMOS 공정기반의 BiCMOS LVDS 구동기를 설계하여 고속 I/O 인터페이스에 적용하고자 한다. 칩 면적을 줄이고 LVDS 구동기의 감내성을 향상시키기 위해 lateral 바이폴라 트랜지스터를 설계하여 LVDS 구동기의 바이폴라 스위칭으로 대체하였다. 설계된 바이폴라 트랜지스터는 20가량의 전류이득을 지니며, 설계된 LVDS 드라이버 셀 면적은 $0.01mm^2$로 설계되었다. 설계된 LVDS 드라이버는 1.8V의 전원 전압에서 최대 2.8Gb/s의 데이터 전송속도를 가진다. 추가적으로 ESD 현상을 보호하기 위해 새로운 구조의 ESD 보호 소자를 설계하였다. 이는 SCR구조에서 PMOS, NMOS의 턴-온 특성을 이용 낮은 트리거링 전압과 래치 업 현상을 최소화 시킬 수 있다. 시뮬레이션 결과 2.2V의 트리거링 전압과 1.1V의 홀딩 전압을 확인할 수 있었다.
Solar cells, converting abundant solar energy into electrical energy, are considered crucial for sustainable energy generation. Recent advancements focus on nanoparticle-enhanced solar cells to overcome limitations and improve efficiency. These cells offer two potential efficiency enhancements. Firstly, plasmonic effects through nanoparticles can improve optical performance by enhancing absorption. Secondly, nanoparticles can improve charge transport and reduce recombination losses, enhancing electrical performance. However, factors like nanoparticle size, placement, and solar cell structure influence the overall performance. This study evaluates the performance of silver nanoparticles incorporated in a p-i-n structure of perovskite solar cells, generated via aerosol state by the evaporation and condensation system. The silver nanoparticles deposited between the hole transport layer and transparent electrode form nanoparticle embedded transport layer (NETL). The evaluation of the optoelectronic properties of perovskite devices using NETL demonstrates their potential for improving efficiency. The findings highlight the possibility of nanoparticle incorporation in perovskite solar cells, providing insights for sustainable energy generation.
Silicon heterojunction solar cells have been studied by many research groups. In this work, silicon heterojunction solar cells having a simple structure of Ag/ZnO:Al/n type a-Si:H/p type c-Si/Al were fabricated. Samples were fabricated to investigate the effect of transparent conductive oxide growth conditions on the interface between ZnO:Al layer and a-Si:H layer. One sample was deposited by ZnO:Al at low working pressure. The other sample was deposited by ZnO:Al at alternating high working pressure and low working pressure. Electrical properties and chemical properties were investigated by light I-V characteristics and AES method, respectively. The light I-V characteristics showed better efficiency on sample deposited by ZnO:Al by alternating high working pressure and low working pressure. Atomic concentrations and relative oxidation states of Si, O, and Zn were analyzed by AES method. For poor efficiency samples, Si was diffused into ZnO:Al layer and O was diffused at the interface of ZnO:Al and Si. Differentiated O KLL spectra, Zn LMM spectra, and Si KLL spectra were used for interface reaction and oxidation state. According to AES spectra, sample deposited by high working pressure was effective at reducing the interface reaction and the Si diffusion. Consequently, the efficiency was improved by suppressing the SiOx formation at the interface.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.